A comprehensive numerical analysis of the dynamical response of Josephson Traveling Wave Parametric Amplifiers (JTWPA) under varying driving conditions is presented. The primary goal is to examine the effects of a current–phase relation (CPR) incorporating a second-harmonic contribution. The analysis further investigates how parameters such as pump intensity, signal frequency, and DC bias current influence the transition to chaos. The results reveal a wide range of dynamical regimes in JTWPAs, offering insights into optimizing device performance and stability. Notably, the shape of the CPR is shown to have a significant impact on the operational effectiveness and stability of JTWPAs. To obtain results closer to real devices, numerical modeling of JTWPAs implementing Resonant Phase Matching (RPM) circuitry has been performed. We have verified that the introduction of RPM allows a significant increase in the amplifier gain also in the case of non-sinusoidal CPR. These findings may have important implications for the development of next-generation JTWPAs, which are essential components in quantum computing and precision measurement applications.
A comprehensive numerical analysis of the dynamical response of Josephson Traveling Wave Parametric Amplifiers (JTWPA) under varying driving conditions is presented. The primary goal is to examine the effects of a current–phase relation (CPR) incorporating a second-harmonic contribution. The analysis further investigates how parameters such as pump intensity, signal frequency, and DC bias current influence the transition to chaos. The results reveal a wide range of dynamical regimes in JTWPAs, offering insights into optimizing device performance and stability. Notably, the shape of the CPR is shown to have a significant impact on the operational effectiveness and stability of JTWPAs. To obtain results closer to real devices, numerical modeling of JTWPAs implementing Resonant Phase Matching (RPM) circuitry has been performed. We have verified that the introduction of RPM allows a significant increase in the amplifier gain also in the case of non-sinusoidal CPR. These findings may have important implications for the development of next-generation JTWPAs, which are essential components in quantum computing and precision measurement applications.
We tackled the numerical analysis of the dynamic response of a Josephson Traveling Wave Parametric Amplifier (JTWPA) by varying the driving parameters, with a focus on the pathways leading to chaotic behavior. By tuning the working conditions, we explore the broad spectrum of dynamical regimes accessible to JTWPAs, delineating the conditions under which transition to chaos occurs. Furthermore, we extend our investigation to junctions characterized by a non-sinusoidal current phase relation (CPR) and explore the consequences on the amplifier’s performance. Through the study of gain characteristics, Poincaré sections, and Fourier spectra, we provide an in-depth understanding of how CPR nonlinearity and nonsinusoidality influence the operational effectiveness and stability of JTWPAs. This investigation offers insights into optimizing the device for enhanced performance and robustness against chaotic disruptions, in order to establish a framework for predicting and controlling JTWPA behavior in practical applications. In fact, we identify the regions in the parameter space where the input signal is maximally amplified without excessive noise or undesired harmonics. This effort paves the way for the development of devices with tailored dynamic responses and for advancements in quantum computing and precision measurement technologies, where stability and high fidelity are of paramount importance.
In this work, we develop a comprehensive numerical analysis of the dynamic response of a Josephson Traveling Wave Parametric Amplifier (JTWPA) by varying the driving parameters, with a focus on the pathways leading to chaotic behavior. By tuning the working conditions, we capture the broad spectrum of dynamical regimes accessible to JTWPAs, delineating the settings under which transition to chaos occurs. Furthermore, we extend our investigation to device formed by junctions characterized by a non--sinusoidal current phase relation (CPR) and exploring the impact of its shape on the amplifier's performance. Through the study of gain characteristics, Poincaré sections, and Fourier spectra, we provide an in-depth understanding of how non-linearity and CPR nonsinusoidality influence the JTWPAs' operational effectiveness and stability. This investigation offers insights into optimizing the device designs for enhanced performance and robustness against chaotic disruptions, in order to establish a framework for predicting and controlling JTWPA behavior in practical applications. This effort will pave the way for the development of devices with tailored dynamic responses and for advancements in quantum computing and precision measurement technologies, where stability and high fidelity are of paramount importance.
In recent years Josephson-junction-based parametric amplifiers have been developed for single-photon-level signals in the microwave spectral region, where they found applications in quantum information processing. Typically, Josephson traveling wave parametric amplifiers (JTWPA) have been studied based on classical circuit models. Although this approach shows good agreement with experimental results, it describes the system behavior in the framework of a classical theory, neglecting the quantum nature of the device. A quantum mechanical treatment of the JTWPA was only given in a few recent papers, where [1] derives a Hamiltonian for a chain of unit cells without resonant phase-matching (RPM), and [2] solves the dynamics of the system with and without RPM, also partly considering noise and squeezed state generation. However, our approach differs from [2] in that we give an explicit solution to the resulting nonlinear wave equation for narrow-band signals, starting from discrete chain Hamiltonians with and without RPM. We focus on describing the dynamics of the device in a noiseless quantum setting and present solutions for the governing nonlinear wave equation in Fig. 1. The starting point of this work is the amplifier design as given in [3]. The mathematical description relies on the Hamiltonian of a discrete chain of unit cells, which was derived in [1], and which we extended by a RPM circuit [2]. As the size Δl of a single chain element is relatively small compared to the wavelength, the chain of discrete Josephson elements can be considered in terms of a continuous transmission line.
Recent advancements in quantum technologies and advanced detection experiments have underscored the pressing need for the detection of exceedingly weak signals within the microwave frequency spectrum. Addressing this challenge, the Josephson Traveling Wave Parametric Amplifier (JTWPA) has been proposed as a cryogenic front-end amplifier capable of approaching the quantum noise limit while providing a relevant bandwidth. This research is centered on a comprehensive numerical investigation of the JTWPA, without resorting to simplifications regarding the nonlinearity of the essential components. Specifically, this study focuses on a thorough examination of the system, characterized by coupled nonlinear differential equations representing all components of the device. Proper input and output signals at the device's boundaries are considered. The analysis of the output signals undergoing the parametric amplification process involves a detailed exploration of phase-space dynamics and Fourier spectral analysis of the output voltage. This study is conducted while considering the parameters ruling the response of the device under pump and signal excitations. In addition to the expected signal amplification, the findings reveal that the nonlinear nature of the system can give rise to unforeseen phenomena, depending on the system's operational conditions, which include: the generation of pump tone harmonics, modulation of the signal gain, and incommensurate frequency generation—effects that are not easily accommodated by simplistic linearized approaches.
Resonant phase-matched Josephson traveling-wave parametric amplifiers (RPM JTWPAs) play a key role in quantum computing and quantum information applications due to their low-noise, broadband amplification, and quadrature squeezing capabilities. This research focuses on optimizing RPM JTWPAs through numerical optimization of parametrized resonator elements to maximize gain, bandwidth and quadrature squeezing. Our results show that optimized resonators can increase the maximum gain and squeezing by more than 5 dB in the ideal noiseless case. However, introducing the effects of loss through a lumped-element model reveals that gain saturates with increasing loss, while squeezing modes degrade rapidly, regardless of resonator optimization. These results highlight the potential of resonator design to significantly improve amplifier performance, as well as the challenges posed by current fabrication technologies and inherent losses.
Josephson traveling-wave parametric amplifiers (JTWPAs) are wideband, ultralow-noise amplifiers used to enable the readout of superconducting qubits. While individual JTWPAs have achieved high performance, behavior between devices is inconsistent due to wide manufacturing tolerances. Amplifier designs could be modified to improve resilience towards variations in amplifier components; however, existing device models often rely on analytical techniques that typically fail to incorporate component variations. To begin addressing this issue, a 1D numerical method for modeling JTWPAs is introduced in this work. The method treats the Josephson junctions and transmission lines in an amplifier as coupled subsystems and can easily incorporate arbitrary parameter variations. We discretize the transmission line subsystem with a finite element time domain method and the Josephson junction subsystem with a finite difference method, with leap-frog time marching used to evolve the system in time. We validate our method by comparing the computed gain to an analytical model for a traditional JTWPA architecture and one with resonant phase matching. We then use our method to demonstrate the impact of variations in Josephson junctions and phase-matching resonators on amplification. In future work, the method will be adjusted to incorporate additional amplifier architectures and extended to a 3D full-wave approach.