Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Conference on Pervasive and Intelligent Computing (PICom)

A Low-Latency Control Fabric for Distributed Quantum Error Correction using RDMA: A Timed Event Structure Model

Vasileios Klimis

Published Oct 21, 2025• 0 citations
Publisher

Abstract

Scalable, fault-tolerant quantum computing will likely rely on distributed architectures of multiple interconnected Quantum Processing Units (QPUs). The performance of such systems is critically limited by the latency of the classical communication required for feedback loops, especially within Quantum Error Correction (QEC) protocols. Traditional network stacks like TCP/IP introduce significant kernel-level overhead, creating latency that can easily exceed qubit coherence times and render QEC ineffective. In this paper, we propose a novel classical control plane architecture that leverages Remote Direct Memory Access (RDMA) to bypass the operating system kernel and enable ultra-low-latency communication between QPU control processors. To formally analyse this system, we introduce a Timed Event Structure model to precisely capture the causality and latency of the entire QEC feedback loop. Our analysis, based on this model, demonstrates that an RDMA-based fabric drastically reduces end-to-end latency compared to a TCP/IP-based approach, establishing it as a critical enabling technology for building robust, distributed, and fault-tolerant quantum computers.

DOI
10.1109/picom68402.2025.00043

Related papers

A Scalable Open-Source QEC System with Sub-Microsecond Decoding-Feedback Latency

Junyi Liu, Yi Lee, Yilun Xu +2 more

Quantum error correction (QEC) is essential for realizing large-scale, fault-tolerant quantum computation, yet its practical implementation remains a major engineering challenge. In particular, QEC demands precise real-time control of a large number of qubits and low-latency, high-throughput and accurate decoding of error syndromes. While most prior work has focused primarily on decoder design, the overall performance of any QEC system depends critically on all its subsystems including control, communication, and decoding, as well as their integration. To address this challenge, we present an open-source, fully integrated QEC system built on RISC-Q, a generator for RISC-V-based quantum control architectures. Implemented on RFSoC FPGAs, our system prototype integrates real-time qubit control, a scalable distributed multi-board architecture, and the state-of-the-art hardware QEC decoder within a low-latency, high-throughput decoding pipeline, forming a complete hardware platform ready for deployment with superconducting qubits. Experimental evaluation on a three-board prototype based on AMD ZCU216 RFSoCs demonstrates an end-to-end QEC decoding-feedback latency of 446 ns for a distance-3 surface code, including syndrome aggregation, network communication, syndrome decoding, and error distribution. Extrapolating from measured subsystem performance and state-of-the-art decoder benchmarks, the architecture can achieve sub-microsecond decoding-feedback latency up to a distance-21 surface code ($\sim$881 physical qubits) when scaled to larger hardware configurations.

quant-pharXiv:2603.16203•Mar 18, 2026•7 citations

Real-Time Quantum Error Correction System Stack: Architecture, Algorithms, and Engineering Practice

Yaojian Chen, Chun-Yang Luan, Peilin Zheng +7 more

Quantum error correction (QEC) is transitioning from physical feasibility demonstrations to systems engineering challenges. Google has achieved below-threshold performance on distance-5/7 surface codes, while Riverlane and Rigetti have demonstrated hardware-integrated low-latency feedback loops. These milestones indicate that the core challenge of real-time decoding has shifted from algorithmic capability to system-level engineering. However, a substantial engineering gap remains between laboratory demonstrations and scalable fault-tolerant quantum computing (FTQC). This white paper addresses three questions: (1) Where are the real bottlenecks in real-time QEC: beyond average decoder speed, the constraints lie in QEC round time, tail latency, and end-to-end data path coordination; (2) How mature are mainstream decoder algorithms: we benchmark the major decoders for both surface codes and quantum low-density parity-check (qLDPC) codes, evaluating their real-time readiness; (3) What system stack do we propose: a six-layer reference architecture from syndrome acquisition to logical operations, with interface definitions and latency budget models. Our results quantify the gap between current decoder performance and real-time requirements, and identify the architectural choices needed to close it.

quant-pharXiv:2605.30765•Jun 1, 2026•3 citations

Real-time decoding of quantum error correction codes using high-performance computing

Lingling Lao, Qiang Wang, Yuanqi Liu +10 more

Quantum error correction (QEC) is indispensable for building scalable fault-tolerant quantum computers. Effective QEC demands stringent real-time decoding: the decoder must process syndrome measurements and determine corrections within a time scale--typically on the order of microseconds, to avoid data backlog. Scaling to large number of logical qubits further necessitates significant computational resources. In this work, we propose an architecture, called \emph{THQLink}, for real-time decoding of quantum error correction codes using high-performance computing (HPC) resources. The network connecting the HPC and the control system of quantum processing unit (QPU) is built on TH-Express and can be adapted to different quantum technologies and their associated control stacks. We report a round-trip latency of 2.944 $μ$s on average, with an incremental overhead of 130 ns per additional hop. Using a parallel window strategy, we demonstrate real-time decoding (1 $μ$s per QEC round) of the surface code up to distance 19 using a matching-based decoder on CPUs. Our work presents a scalable framework for real-time decoding in fault-tolerant quantum computing. It can be readily applied to quantum-centric supercomputers that feature tight integration between QPU and HPC resources, thereby enabling efficient support for hybrid quantum-classical algorithms and computation-intensive workloads offloaded from the QPU.

quant-pharXiv:2608.03948•Aug 5, 2026•2 citations

Real-time Surface-Code Error Correction Using an FPGA-based Neural-Network Decoder

Xiaohan Yang, Xuandong Sun, Zhiyi Wu +9 more

Quantum error correction (QEC) is essential for achieving low error rates required for fault-tolerant quantum computation. In stabilizer-based codes such as the surface code, errors are inferred from repeated syndrome measurements and corrected by a classical decoder. To prevent error accumulation, decoding must be performed with both high throughput and low latency to keep pace with the QEC cycle and enable real-time feedback for universal logical operations. Here we report a hardware-integrated control architecture featuring an FPGA-based neural-network (NN) decoder and experimentally demonstrate real-time surface-code (distance-3) QEC on a superconducting quantum processor. The system achieves a deterministic closed-loop latency of 550 ns, including 124 ns for NN decoding, enabling feedback corrections within a 1.25 us QEC cycle. We show that real-time decoding and feedback correction achieve logical performance comparable to offline decoding while maintaining robustness against varying error conditions. We further demonstrate mid-circuit feedback correction in non-Clifford logical circuits, where Pauli-frame updating alone becomes insufficient. Our results establish a low-latency hardware architecture for embedded QEC control and provide a pathway towards scalable fault-tolerant quantum computing systems.

quant-pharXiv:2605.04892•May 7, 2026•8 citations

Hardware-in-the-Loop Reinforcement Learning for Quantum Error Correction: A Systems-Engineering Approach to Latency-Aware Decoding

Hiroshi Tanaka, Kenji Yamamoto, Takeshi Saito

The scalability of fault-tolerant quantum computing is strictly bounded by the performance and latency of Quantum Error Correction (QEC) decoding systems. While Reinforcement Learning (RL) has emerged as a promising approach for deriving optimal decoding policies, current Deep Q-Network (DQN) agents are overwhelmingly trained using idealized software simulators. These simulators employ deterministic latency models that drastically fail to capture the stochastic load noise, memory contention, thermal throttling, and bus jitter inherent to real-world hardware deployment on Field-Programmable Gate Arrays (FPGAs). In this paper, we propose a comprehensive Hardware-in-the-Loop (HIL) Reinforcement Learning architecture that physically situates the FPGA in the RL environment feedback loop. By directly offloading syndrome processing jobs to the FPGA hardware during training, the DQN agent observes the exact microarchitectural execution latency as its environmental reward. We formulate a robust, systems-engineering oriented framework that captures true edge-deployment constraints. Our extensive HIL empirical results demonstrate that agents trained against true hardware telemetry develop distinct decoding strategies that actively avoid routing congestion in the FPGA fabric, yielding up to a $42\%$ reduction in long-tail latency events and improving the effective logical error rate under strict real-time decoding constraints.

•Jul 21, 2026•0 citations

Coset Ensemble Decoder for Quantum Error Correction with Algorithm-Hardware Co-Design

Shuang Liang, Jubo Xu, Giulio Bassanino +8 more

Reliable large-scale quantum computation relies on fault-tolerant architectures, where quantum error correction (QEC) continuously extracts and decodes error syndromes in real time. A critical component in QEC is the decoder, a classical subsystem that must simultaneously deliver high logical accuracy and ultra-low latency. This paper presents a novel algorithm-hardware co-design that improves the accuracy-latency trade-off over existing approaches such as vanilla Minimum-Weight Perfect Matching (MWPM) and Union-Find (UF) decoders. At the algorithmic level, we introduce coset ensemble decoding, which improves UF decoding by explicitly exploiting logically equivalent cosets. Our method performs ensemble forest exploration to generate multiple coset-consistent candidates and aggregates them to approximate coset-level maximum-likelihood decoding. We further reduce computational and memory complexity via reverse-order elimination and lossless graph compression, without sacrificing accuracy. At the hardware level, we design a domain-specific architecture that temporally reuses resources, avoiding the code-distance-proportional resource growth in prior spatial architectures. Several optimizations, such as multi-bank memory hashing and hierarchical ID mapping, are proposed to mitigate pipeline stalls and memory conflicts under highly concurrent access patterns. Under a circuit-level depolarizing noise model, our co-design approach achieves a better accuracy-latency trade-off than prior MWPM- and UF-based decoders, while reducing FPGA LUT consumption by up to 8.2 times compared with reported UF-based decoder resources. The tunable candidate number further exposes a flexible design knob, enabling users to tailor decoding performance to the requirements of different fault-tolerant workloads. Our implementation is publicly available at https://github.com/IMSeonL/coset-ensemble-decoder.

cs.ARCross-listedarXiv:2606.11076•Proceedings - International Symposium on Computer Architecture/Proceedings•Jun 10, 2026•2 citations
Scalable, fault-tolerant quantum computing will likely rely on distributed architectures of multiple interconnected Quantum Processing Units (QPUs). The performance of such systems is critically limited by the latency of the classical communication required for feedback loops, especially within Quantum Error Correction (QEC) protocols. Traditional network stacks like TCP/IP introduce significant kernel-level overhead, creating latency that can easily exceed qubit coherence times and render QEC ineffective. In this paper, we propose a novel classical control plane architecture that leverages Remote Direct Memory Access (RDMA) to bypass the operating system kernel and enable ultra-low-latency communication between QPU control processors. To formally analyse this system, we introduce a Timed Event Structure model to precisely capture the causality and latency of the entire QEC feedback loop. Our analysis, based on this model, demonstrates that an RDMA-based fabric drastically reduces end-to-end latency compared to a TCP/IP-based approach, establishing it as a critical enabling technology for building robust, distributed, and fault-tolerant quantum computers.
Quantum error correction (QEC) is essential for realizing large-scale, fault-tolerant quantum computation, yet its practical implementation remains a major engineering challenge. In particular, QEC demands precise real-time control of a large number of qubits and low-latency, high-throughput and accurate decoding of error syndromes. While most prior work has focused primarily on decoder design, the overall performance of any QEC system depends critically on all its subsystems including control, communication, and decoding, as well as their integration. To address this challenge, we present an open-source, fully integrated QEC system built on RISC-Q, a generator for RISC-V-based quantum control architectures. Implemented on RFSoC FPGAs, our system prototype integrates real-time qubit control, a scalable distributed multi-board architecture, and the state-of-the-art hardware QEC decoder within a low-latency, high-throughput decoding pipeline, forming a complete hardware platform ready for deployment with superconducting qubits. Experimental evaluation on a three-board prototype based on AMD ZCU216 RFSoCs demonstrates an end-to-end QEC decoding-feedback latency of 446 ns for a distance-3 surface code, including syndrome aggregation, network communication, syndrome decoding, and error distribution. Extrapolating from measured subsystem performance and state-of-the-art decoder benchmarks, the architecture can achieve sub-microsecond decoding-feedback latency up to a distance-21 surface code ($\sim$881 physical qubits) when scaled to larger hardware configurations.
Quantum error correction (QEC) is transitioning from physical feasibility demonstrations to systems engineering challenges. Google has achieved below-threshold performance on distance-5/7 surface codes, while Riverlane and Rigetti have demonstrated hardware-integrated low-latency feedback loops. These milestones indicate that the core challenge of real-time decoding has shifted from algorithmic capability to system-level engineering. However, a substantial engineering gap remains between laboratory demonstrations and scalable fault-tolerant quantum computing (FTQC). This white paper addresses three questions: (1) Where are the real bottlenecks in real-time QEC: beyond average decoder speed, the constraints lie in QEC round time, tail latency, and end-to-end data path coordination; (2) How mature are mainstream decoder algorithms: we benchmark the major decoders for both surface codes and quantum low-density parity-check (qLDPC) codes, evaluating their real-time readiness; (3) What system stack do we propose: a six-layer reference architecture from syndrome acquisition to logical operations, with interface definitions and latency budget models. Our results quantify the gap between current decoder performance and real-time requirements, and identify the architectural choices needed to close it.
Quantum error correction (QEC) is indispensable for building scalable fault-tolerant quantum computers. Effective QEC demands stringent real-time decoding: the decoder must process syndrome measurements and determine corrections within a time scale--typically on the order of microseconds, to avoid data backlog. Scaling to large number of logical qubits further necessitates significant computational resources. In this work, we propose an architecture, called \emph{THQLink}, for real-time decoding of quantum error correction codes using high-performance computing (HPC) resources. The network connecting the HPC and the control system of quantum processing unit (QPU) is built on TH-Express and can be adapted to different quantum technologies and their associated control stacks. We report a round-trip latency of 2.944 μμμs on average, with an incremental overhead of 130 ns per additional hop. Using a parallel window strategy, we demonstrate real-time decoding (1 μμμs per QEC round) of the surface code up to distance 19 using a matching-based decoder on CPUs. Our work presents a scalable framework for real-time decoding in fault-tolerant quantum computing. It can be readily applied to quantum-centric supercomputers that feature tight integration between QPU and HPC resources, thereby enabling efficient support for hybrid quantum-classical algorithms and computation-intensive workloads offloaded from the QPU.
Quantum error correction (QEC) is essential for achieving low error rates required for fault-tolerant quantum computation. In stabilizer-based codes such as the surface code, errors are inferred from repeated syndrome measurements and corrected by a classical decoder. To prevent error accumulation, decoding must be performed with both high throughput and low latency to keep pace with the QEC cycle and enable real-time feedback for universal logical operations. Here we report a hardware-integrated control architecture featuring an FPGA-based neural-network (NN) decoder and experimentally demonstrate real-time surface-code (distance-3) QEC on a superconducting quantum processor. The system achieves a deterministic closed-loop latency of 550 ns, including 124 ns for NN decoding, enabling feedback corrections within a 1.25 us QEC cycle. We show that real-time decoding and feedback correction achieve logical performance comparable to offline decoding while maintaining robustness against varying error conditions. We further demonstrate mid-circuit feedback correction in non-Clifford logical circuits, where Pauli-frame updating alone becomes insufficient. Our results establish a low-latency hardware architecture for embedded QEC control and provide a pathway towards scalable fault-tolerant quantum computing systems.
The scalability of fault-tolerant quantum computing is strictly bounded by the performance and latency of Quantum Error Correction (QEC) decoding systems. While Reinforcement Learning (RL) has emerged as a promising approach for deriving optimal decoding policies, current Deep Q-Network (DQN) agents are overwhelmingly trained using idealized software simulators. These simulators employ deterministic latency models that drastically fail to capture the stochastic load noise, memory contention, thermal throttling, and bus jitter inherent to real-world hardware deployment on Field-Programmable Gate Arrays (FPGAs). In this paper, we propose a comprehensive Hardware-in-the-Loop (HIL) Reinforcement Learning architecture that physically situates the FPGA in the RL environment feedback loop. By directly offloading syndrome processing jobs to the FPGA hardware during training, the DQN agent observes the exact microarchitectural execution latency as its environmental reward. We formulate a robust, systems-engineering oriented framework that captures true edge-deployment constraints. Our extensive HIL empirical results demonstrate that agents trained against true hardware telemetry develop distinct decoding strategies that actively avoid routing congestion in the FPGA fabric, yielding up to a 42%42\%42% reduction in long-tail latency events and improving the effective logical error rate under strict real-time decoding constraints.
Reliable large-scale quantum computation relies on fault-tolerant architectures, where quantum error correction (QEC) continuously extracts and decodes error syndromes in real time. A critical component in QEC is the decoder, a classical subsystem that must simultaneously deliver high logical accuracy and ultra-low latency. This paper presents a novel algorithm-hardware co-design that improves the accuracy-latency trade-off over existing approaches such as vanilla Minimum-Weight Perfect Matching (MWPM) and Union-Find (UF) decoders. At the algorithmic level, we introduce coset ensemble decoding, which improves UF decoding by explicitly exploiting logically equivalent cosets. Our method performs ensemble forest exploration to generate multiple coset-consistent candidates and aggregates them to approximate coset-level maximum-likelihood decoding. We further reduce computational and memory complexity via reverse-order elimination and lossless graph compression, without sacrificing accuracy. At the hardware level, we design a domain-specific architecture that temporally reuses resources, avoiding the code-distance-proportional resource growth in prior spatial architectures. Several optimizations, such as multi-bank memory hashing and hierarchical ID mapping, are proposed to mitigate pipeline stalls and memory conflicts under highly concurrent access patterns. Under a circuit-level depolarizing noise model, our co-design approach achieves a better accuracy-latency trade-off than prior MWPM- and UF-based decoders, while reducing FPGA LUT consumption by up to 8.2 times compared with reported UF-based decoder resources. The tunable candidate number further exposes a flexible design knob, enabling users to tailor decoding performance to the requirements of different fault-tolerant workloads. Our implementation is publicly available at https://github.com/IMSeonL/coset-ensemble-decoder.