The entry into the new millennium was marked in the quantum community by the first experimental realizations of the Bose-Einstein condensation of atoms in a vapor, achieved in different research groups. Twenty-five years later, such systems are 'routinely' produced and are the core of many experiments. At the frontier between condensed matter their y, quantum optics, and atomic physics, ultra-cold atoms are subjects of high scientific interest.Ultra-cold gas can be trapped in optical lattices, giving a realistic way of experimentally realizing a new range of lattice Hamiltonians, that are used to simulate condensed matter systems. In these simulations, ultra-cold atoms are used to mimic the behavior of electrons in a solid-state material and could be used to simulate a wide range of complex condensed matter phenomena, such as the fractional quantum Hall effect, topological insulators, and high-temperature superconductivity.In order to study such systems, diffraction-limited quantum gas microscopes have emerged as a way to manipulate and detect atoms trapped in lattice potentials. Using far-field interference, experiments have mainly been restricted to a lattice spacing of 500 nm. This limits the speed of dynamics of all physical processes.Higher energy regimes could be accessed by reducing the lattice spacing. For this purpose, one of the long-term goals of the team is to trap atoms in the near-field of a surface and to make use of the Casimir-Polder forces to shape sub-wavelength potentials. Thanks to nano-fabrication capabilities, the spacing can be reduced to a few tens of nanometers. However, this requires to adapt the imaging techniques to observe cold-atoms with sub-wavelength spatial resolutions.In this PhD thesis, I report first on the advances toward implementing an atom chip in our experiment, which will serve as an integrated platform to manipulate the quantum gas. I present simulations and study an experimental solution allowing the cloud to be transported to the near-field. The method is based on the interference of a laser radiation in the near field of a rotating surface. It has been fully simulated, and the limitations have been numerically and experimentally assessed. I conclude this part by presenting the first model of chip that has been fabricated.In a second part, I report on the development of a sub-wavelength imaging method of cold Rubidium 87 atoms which is based on excited state dressing. I detail the concept of this nano-metric spatial resolution method and apply it to super-resolve a single longitudinal wave function trapped in a tight lattice that exhibits a width below 30 nm.
The entry into the new millennium was marked in the quantum community by the first experimental realizations of the Bose-Einstein condensation of atoms in a vapor, achieved in different research groups. Twenty-five years later, such systems are 'routinely' produced and are the core of many experiments. At the frontier between condensed matter their y, quantum optics, and atomic physics, ultra-cold atoms are subjects of high scientific interest.Ultra-cold gas can be trapped in optical lattices, giving a realistic way of experimentally realizing a new range of lattice Hamiltonians, that are used to simulate condensed matter systems. In these simulations, ultra-cold atoms are used to mimic the behavior of electrons in a solid-state material and could be used to simulate a wide range of complex condensed matter phenomena, such as the fractional quantum Hall effect, topological insulators, and high-temperature superconductivity.In order to study such systems, diffraction-limited quantum gas microscopes have emerged as a way to manipulate and detect atoms trapped in lattice potentials. Using far-field interference, experiments have mainly been restricted to a lattice spacing of 500 nm. This limits the speed of dynamics of all physical processes.Higher energy regimes could be accessed by reducing the lattice spacing. For this purpose, one of the long-term goals of the team is to trap atoms in the near-field of a surface and to make use of the Casimir-Polder forces to shape sub-wavelength potentials. Thanks to nano-fabrication capabilities, the spacing can be reduced to a few tens of nanometers. However, this requires to adapt the imaging techniques to observe cold-atoms with sub-wavelength spatial resolutions.In this PhD thesis, I report first on the advances toward implementing an atom chip in our experiment, which will serve as an integrated platform to manipulate the quantum gas. I present simulations and study an experimental solution allowing the cloud to be transported to the near-field. The method is based on the interference of a laser radiation in the near field of a rotating surface. It has been fully simulated, and the limitations have been numerically and experimentally assessed. I conclude this part by presenting the first model of chip that has been fabricated.In a second part, I report on the development of a sub-wavelength imaging method of cold Rubidium 87 atoms which is based on excited state dressing. I detail the concept of this nano-metric spatial resolution method and apply it to super-resolve a single longitudinal wave function trapped in a tight lattice that exhibits a width below 30 nm.
Recently, cold atoms in lattices blossomed as good candidates to mimic the prop- erties of electrons in solid state systems and to simulate other quantum systems. However, experimental techniques currently use optical lattices in the far-field. This limit the lattice spacing to λ/2, thus the relevant energy scale (tunneling and interaction), making it difficult to enter deeply into the proper quantum regimes to observe magnetic quantum correlations or strongly correlated phases. Our project aims at reducing the lattice period to bridge the gap between solid state ( ̊A) and far field lattice (500nm) by developing an hybrid quantum system of Bose and Fermi quantum gas in close proximity of a nano-structured surface generating sub-wavelength lattice potentials. To push toward this goal, we first developed a novel method to transport and then trap an ultracold atomic cloud in close vicinity of a surface. We will discuss about the early stage atom-chip produced, and report on some tests about the transport sequence. By measuring the power spectral density of the trap parameters, we can predict the noise- induce heating of the trapped cloud. In order to work with such system, one need to be able to address individually each sites with a resolution under the standard PSF limit. We implemented a tunable sub-wavelength imaging system with a theoretical resolution of 30nm that we used to resolve the wave-packet of a cloud in a single lattice site. This scheme involves two superimposed optical lattices, one at 1064nm and one at 1529nm, whose interfringe can be tuned. We present hereafter the experimental setup in detail and show interesting results we obtained.
Quantum gas microscopes have become a major element for quantum simulations using ultra-cold atoms in optical lattices. They are for example used to observe long-range order such as anti-ferromagnetic correlations in far field optical lattices using density and spin resolved microscopy. Decreasing the period of such lattice offer interesting perspective to increase atom-atom interaction energies and engineer atom-light coupling that our group tackles via the hybridization of cold atoms and nano-structured surfaces.In this poster, we will present how such type of sub-wavelength lattice potentials can be generated by trapping atoms in proximity (tens to hundreds of nanometers) of a nano-structured surface. At such atom to surface distance, the attractive Casimir-Polder force can be compensated by a doubly dressed state trapping method that I will discuss. Such method additionally offers solutions to overcome the diffraction limit of conventional imaging that become critical for sub-wavelength lattices. In this work, I will present the experimental characterization of a sub-wavelength resolution absorption imaging applicable to quantum gas detection. This method requires a quantitative determination of the atom number of dense clouds which has been characterized in this work and demonstrate that the scattering cross section reduces linearly with the optical density. Modelling the propagation of light in dense cloud we show that this reduction can be attributed to re-scattering of the incoherent part of the resonant fluorescence spectrum.The poster will additionally present an update on our recent work on the spectroscopy of Acetylene in sealed hollow core fibers.
Ultracold atomic gases can be utilised as extremely sensitive probes of their surrounding environment. In particular, samples of ultracold atoms confined using chip-based microtraps are an ideal tool for mapping electric and magnetic field landscapes. Over the course of this thesis, a new experiment capable of performing surface microscopy using magnetically trapped clouds of cold rubidium-87 atoms has been built. The focus of the work is on the design and construction of the experimental system, which must incorporate many different aspects for manipulating thermal atomic gases, with a view to positioning them at sub-micron distances from special surfaces. This reduced atom-surface separation is necessary for implementing a high resolution, high sensitivity magnetic field sensor with cold atoms. Although current microfabrication techniques easily enable trapping at distances on the order of micrometres, several distance-dependent surface effects - such as the Casimir-Polder force, Johnson-Nyquist noise, and stray potentials - eventually impede magnetic trapping at the sub-micron level. These surface effects can greatly modify the confining potentials, which reduces the trap depth and consequently leads to an additional loss rate of atoms from the trap. We have explored the possibility of using special surfaces such as nano-membranes of silicon nitride and graphene, which have reduced atom- surface interactions, to enable trapping distances at the sub-micron level. A multilayer printed circuit board chip has been designed to form an initial magnetic trap and then transport the cloud of atoms to a desired location over the samples. This chip, along with various samples, is mounted on a custom-made electrical feedthrough designed to make connections to all conductor that are inside the vacuum chamber. The initial cloud of cold atoms can then be prepared in the central region of the chip and delivered to the location of the samples on either side. The experimental system is able to routinely capture over 10^8 rubidium-87 atoms at a temperature of 80 micro-Kelvin in a magneto-optical trap using a novel scheme of five laser beams. A method is demonstrated for enhancing the atom number in the magneto-optical traps by a factor of two by using laser beams with two slightly different frequencies. Atoms from the magneto-optical trap are then transferred to a purely magnetic trap formed by the wires on the printed circuit board chip. Time-dependent currents in the chip wires then create a dynamic potential, which is shown to successfully transport the atomic sample over a distance of 12 millimetre with minimal atom loss. This thesis describes the development of the apparatus in detail, along with careful characterisation of the cold cloud at various stages of the experimental sequence. Initial results on the long distance atom transport are presented. Finally, the experimental results of the two frequency magneto-optical trap for atom number improvement are discussed.
Cold atoms are a quantum system well-isolated from the environment. Since the 80s, they have been used to make high-sensitivity atomic sensors and to deepen the understanding of quantum physics phenomena. At low temperatures, degenerate atomic gas regimes can be reached. They are characterized by a macroscopic quantum state that can be manipulated and controlled by lasers. Placing such atomic wave function in optical lattices provide a way to study the dynamics of complex many-body systems. In this context, diffraction-limited quantum gas microscopes have emerged as standard tools to probe such complex systems and to measure atomic density correlations between lattice sites. By further reducing the optical lattices dimensions, the energy scales are strongly enhanced and favor novel quantum phases. Such reduction of optical lattice dimensions requires novel trapping and imaging techniques to manipulate cold-atoms with subwavelength spatial resolutions.In this PhD thesis, we experimentally perform subwavelength imaging of ultra-cold atoms of Rubidium 87 using a dressed excited state method, initially proposed for generating subwavelength trapping potentials. The measurement are performed using in situ absorption imaging. A quantitative comparison of data and theory lead us to reinterprete and modify a method for atom number calibrations that is commonly used in the community. This reinterpretation requires a fine understanding of the interaction of a single quantum multi-level system and a coherent saturating field. The measurement of the in situ transmission of a coherent probe shows a linear reduction of the single-atom scattering cross-section with the optical density for which we propose a physical interpretation and a model. Once calibrated, we use our subwavelength imaging method that reaches down to 20 nm resolution in a few microseconds to super-resolve a tiny quantum object : the longitudinal wave function of a BEC in a very tight lattice.
Imagine a new generation of computers that dramatically surpasses the most powerful supercomputers, being able to tackle the most challenging of computational problems. These problems arise, for example, in quantum physics where the computational power required to model a many-particle system increases exponentially with the number of its constituents, and as a consequence the calculations become prohibitively time-consuming. Nobel laureate Richard Feynman proposed this new type of computer in the early 1980s: ‘Let the computer itself be built of quantum mechanical elements which obey quantum mechanical laws.’ Such a quantum simulator would allow researchers to tackle challenging problems in condensed-matter physics. In particular many-body fermionic quantum systems are very difficult to compute due to the antisymmetric nature of the wave function, and the resulting sign problem for quantum Monte Carlo methods. This is why a quantum simulator will be an excellent test bed to investigate phenomena and properties of strongly correlated fermionic quantum systems. A powerful experimental platform to realize a quantum simulator is laser-cooled atoms [1] held in an artificial crystal of light, generated by superimposing laser beams. The atoms are kept in this optical lattice similar to marbles in the hollows of an egg carton, and they can mimic the behaviour of electrons in a real crystal. These systems interface atomic physics with condensed matter physics in a new way, as the tools of atomic physics allow for exquisite control of many experimental parameters, which are often inaccessible in solid state experiments. In-situ imaging techniques [2] using ‘quantum-gas microscopes’ constitute a new approach to the study of many-body quantum systems in an optical lattice with unprecedented resolution at the single-particle and single-site level [3,4]. This new method is complementary to earlier optical lattice experiments measuring distributions in momentum space after a time-of-flight expansion. A quantum-gas microscope uses an optical imaging system (Fig. 1a) for collecting the fluorescence light of ultracold atoms in an optical lattice with high spatial resolution comparable to the lattice spacing of ≈ 500 nm. (a) Atoms in optical lattice atoms are imaged with a high-resolution microscope objective [4]. (b) Single-site addressing is achieved by focussing a laser beam through the microscope onto selected atoms, bringing them into resonance with microwave radiation which produces spin flips [12]. (c) and (d) Single-atom-resolved fluorescence images of bosonic Mottinsulators [4,9]. (e) Deterministically prepared atom distribution using single-site addressing [12]. (f) Direct observation of single-atom quantum walks [15]. Fluorescence imaging of atoms in a quantum-gas microscope has made it possible to directly observe bosonic Mott insulators with single-atom resolution [4–6], giving access to in-situ measurements of temperature and entropy distributions. Subsequently, ground-breaking experiments in many-body quantum dynamics have been performed, such as the first direct observation of correlation spreading after quenches of the system to lower lattice depths [7]. Other experiments include the quantum simulation of an antiferromagnetic spin-1/2 chain [8], the realization of algorithmic cooling [9], the direct measurement of correlations across the superfluid-to-Mott-insulator transition [10], or the observation of the ‘Higgs’ amplitude mode [11]. The high-resolution imaging system is also capable of optically addressing individual atoms with sub-diffraction-limited resolution. For this purpose, a laser beam is focussed though the microscope objective onto selected lattice sites, bringing the atoms into resonance with microwave radiation which produces spin flips [12,13]. The preparation of arbitrary atom distributions in the lattice not only opens perspectives for neutral-atom quantum information processing, but also allows the deterministic creation of specific out-of-equilibrium situations, and their ensuing system dynamics can be studied with single-atom resolution. Examples include the creation of spin impurities and the study of their dynamics in a many-body system [14], the observation of quantum walks [15] and magnon-bound states [16], and the measurement of entanglement entropy [17]. The technique used for single-site-resolved detection of individual atoms in the optical lattice is fluorescence imaging. It requires laser cooling of the atoms to sub-Doppler temperatures while detecting the fluorescence photons emitted during this process. A challenge is to achieve a low particle loss rate and to prevent the atoms from hopping between lattice sites. In the case of the first quantum-gas microscopes, this has been implemented with bosonic rubidium-87 atoms, and also recently for ytterbium-174. However, it has proven more challenging for fermionic alkaline species such as potassium-40 and lithium-6, as their low mass and small excited state hyperfine splitting-prevented standard sub-Doppler cooling from working. As a result, it took several years to extend the quantum-gas microscope technique to fermionic species, and in 2015 several groups have demonstrated single-atom-resolved imaging of fermions [18]. In these setups, the direct observation of band insulators [19], fermionic Mott insulators [20,21] and even antiferromagnetic correlations [22] has been reported most recently. These developments provide fascinating opportunities to study many-body fermionic quantum systems with single-particle access. The fermionic nature of the electron is vital to understanding a range of phenomena within solid-state physics, such as electron pairing in superconductivity, and quantum magnetism. In this context, the quantum simulator will allow, e.g. for direct measurement of ordered quantum phases and out-of-equilibrium dynamics, with access to quantities such as spin--spin correlation functions and the growth of many-body entanglement. The high-resolution imaging systems could also be used to project tailored time-varying light fields onto the atoms, allowing the removal of high-entropy regions by locally modifying the confining potential to attain very low-entropy states. Attaining these low-entropy many-particle states is one of the key challenges in our field. In summary, quantum-gas microscopes offer unprecedented access to many-body quantum systems, and they will allow us to gain an even deeper insight into the intriguing world of quantum physics that governs the properties of strongly correlated materials. Using a well-controlled quantum system to simulate other quantum systems could help resolve some of the most challenging problems scientists face in condensed matter physics and materials science, but it will also provide new insights in quantum chemistry, high-energy physics and biology. SK acknowledges funding from the EU (ERC FERMILATT, SIQS, QuProCs) and SUPA.
Atom chips are an excellent tool for studying ultracold degenerate quantum gases, due to the high degree of controllability afforded by the precise potentials generated from the current-carrying microfabricated wires on the chip surface. The geometries of the trapping potentials are inherently capable of realising extreme aspect ratios, and therefore creating model systems with effectively reduced dimensionality, particularly the theoretically-tractable one-dimensional Bose gas. In addition, the temporal tunability makes it possible to impart non-adiabatic changes on the trapping potentials, allowing experimental investigation of samples which have been brought out of equilibrium - a situation which is not fully theoretically understood. This thesis describes the implementation, development and characterisation of an experimental system for producing the first Bose-Einstein condensates of atomic rubidium 87 gas trapped on the surface of an atom chip in Nottingham. Such an apparatus is very complex and requires careful characterisation in order to run in a stable and reliable way. Details of the experimental setup are thoroughly outlined, including the vacuum system, lasers, electronics, computer control and timing, and the optical imaging system. A newly installed compact two-dimensional magneto-optical trap provides an loading rate of 5e7 atoms per second for loading a three-dimensional mirror-magneto-optical trap with 1.5e8 atoms, at a temperature of 300uK within 10s. The cloud is then sub-Doppler cooled to 50uK, and spin-polarised with 96% purity into the |F=2,mF=+2> ground state within 5ms, in preparation for loading a purely magnetic trap. A millimeter sized copper Z-shaped conductor located beneath the atom chip surface creates a Ioffe-Pritchard magnetic trap, into which the laser cooled cloud is loaded with 70% efficiency, and can be held with a vacuum-limited lifetime of 40s. Evaporative cooling then pre-cools the sample to below 20uK within 10s, to allow the subsequent loading into potentials created by the atom chip with 100% efficiency. A final evaporation stage then cools the cloud below the phase transition temperature of 800nK, resulting finally in pure BECs with 105 atoms confined using the atom chip. Key measurements of various properties of the trapped condensates are presented, which are important in order to characterise the system fully, and to compare with theoretical expectations. In particular, included are the variation of condensate fraction with temperature, the BEC expansion dynamics, and the condensate lifetime in the trap, for example. Finally, it is demonstrated how BECs can be produced on the atom chip without the use of external macroscopic coils, achieved by using novel, integrated sheet structures located beneath the chip surface - unique to this experimental system - to create the necessary bias fields.