Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Superconducting quantum devices for use at liquid hydrogen temperatures. Final report

Janocko, C. K. Jones

Published Jul 31, 1972• 0 citations
OpenAlex

Abstract

Superconducting quantum detectors operable at temperatures above 12 K would be highly desirable for use with closed-cycle cryogenic refrigerators. The Dayem bridge form of device has inherent advantages of stability and reproducibility. Dayem bridges were made from thin films of NbN and Mo-Re alloy. The Mo-Re junctions exhibit Josephson phenomena up to 12.6 K. A cryo-refrigerator usable with junctions of this type was evaluated. (Author) (GRA)

Related papers

Superconducting Quantum Devices for Use at Liquid Hydrogen Temperatures.

M. A. Janocko, C. K. Jones

Superconducting quantum detectors operable at temperatures above 12 K would be highly desirable for use with closed-cycle cryogenic refrigerators. The Dayem bridge form of device has inherent advantages of stability and reproducibility. Dayem bridges were made from thin films of NbN and Mo-Re alloy. The Mo-Re junctions exhibit Josephson phenomena up to 12.6 K. A cryo-refrigerator usable with junctions of this type was evaluated. (Author)

•Jul 31, 1972•0 citations

Development of NbN Josephson Junction technology

Masoud Radparvar

A novel process suitable for fabrication superconducting circuitry based on the all refactory material NbN is described. In this process, and in-situ trilayer film composed of NbN/MgO/NbN is used to fabricate Josephson tunnel junctions. Reactive ion etching processes are used to delineate devices and pattern insulators and metallizations. Fabricated junctions have yielded good tunneling characteristics with reasonable current density uniformity and reproducibility. Devices with gap voltages close to 3mV have been achieved for high quality junctions (Vm 20 mV). In addition to the trilayer, there are two wiring layers, two resistor depositions, and two insulation layers, constituting a full NbN based fabrication technology. Using this process, we fabricated and successfully tested thin film DC SQUID and time domain reflectometer (TDR) circuits. Preliminary measurements suggest that the critical temperature of these circuits is well within the operating temperature of commercial two-stage closed cycle refrigerators. (Author)

Final Report•Jul 24, 1986•0 citations

Nb-based overdamped junctions with improved performance for measurement applications

V. Lacquaniti, Domenico Andreone, Cristina Cassiago +5 more

Optimization of the performance of Nb-based overdamped Josephson junctions for applications to superconducting electronics is a major issue today. The use of cryocoolers, thus avoiding liquid helium refrigeration, with junctions working at temperatures higher than 4.2 K, could greatly increase the use of these devices in applications such as fundamental metrology and measurement sensors. The question we address here is how to maximize the characteristic voltage and minimize the temperature influence on the current-voltage curves of overdamped junctions enabling their use at T > 4.2K. To optimize the properties of a single Josephson heterostructure, we propose a type of overdamped junction that consists of a relatively thin insulating layer and a thick (tens of nm) normal-metal film between two superconducting electrodes. Measurements of the dependence of the critical current and characteristic voltage as function of temperature for dierent electrodes configurations show how it is possible to improve the design of these junctions.

Journal of Physics Conference Series•Feb 1, 2008•1 citation

Fabrication and performance of all NbN Josephson junction circuits

Masoud Radparvar, M. Berry, R.E. Drake +3 more

A novel process suitable for fabricating superconducting circuitry based on the all refractory material NbN is described. In this process, an in-situ trilayer film composed of NbN/MgO/NbN is used to fabricate Josephson tunnel junctions. Reactive ion etching processes are used to delineate devices and pattern insulators and metallizations. Fabricated junctions have yielded good tunneling characteristics with reasonable current density uniformity and reproducibility. Devices with gap voltages close to 5mV have been achieved for high quality junctions. In addition to the trilayer, there are two wiring layers, two resistor depositions, and two insulation layers, constituting a full NbN based fabrication technology. Using this process, we fabricated and successfully tested thin film DC SQUID and time domain reflectometer (TDR) circuits. Preliminary measurements suggest that the critical temperature of these circuits is well within the operating temperature of commercial two-stage closed cycle refrigerators.

IEEE Transactions on Magnetics•Mar 1, 1987•32 citations

Demonstration of high-impedance superconducting NbRe Dayem bridges

S. Battisti, J. Koch, Alessandro Paghi +10 more

Here, we demonstrate superconducting Dayem-bridge weak-links made of different stoichiometric compositions of NbRe. Our devices possess a relatively high critical temperature, normal-state resistance, and kinetic inductance. In particular, the high kinetic inductance makes this material a good alternative to more conventional niobium-based superconductors (e.g., NbN or NbTiN) for the realization of superinductors and high-quality factor resonators, whereas the high normal-state resistance yields a large output voltage in superconducting switches and logic elements realized upon this compound. Moreover, out-of-plane critical magnetic fields exceeding 2 T ensure that possible applications requiring high magnetic fields can also be envisaged. Altogether, these features make this material appealing for a number of applications in the framework of quantum technologies.

arXiv:2312.04331•Applied Physics Letters•Apr 22, 2024•2 citations

NbCN Josephson junctions with AlN barriers

S.L. Thomasson, James M. Murduck, Huang-Tian Chan

Niobium carbonitride (NbCN) Josephson circuits can operate over a wider temperature range than either niobium or niobium nitride circuits. Higher operating temperature places NbCN technology more comfortably within the range of closed-cycle refrigerators, a key factor in aerospace applications. Tunnel junctions have been fabricated from NbCN films with transition temperatures up to 18 K. High-quality NbCN tunnel junction fabrication generally requires low stress films with roughness less than the barrier thickness ( approximately=20 AA). Scanning tunneling microscopy was developed as a tool for measuring and optimizing film smoothness. Junctions formed in situ with AlN tunneling barriers show reproducible I-V characteristics. Unlike NbN, NbCN oxidizes readily, enabling junction definition by a modified SNAP process. This SNAP lithography technique successfully produced NbCn/AlN/NbCN junctions with V/sub m/ values (at 3 mV) up to 27 mV.

IEEE Transactions on Magnetics•Mar 1, 1991•11 citations
Superconducting quantum detectors operable at temperatures above 12 K would be highly desirable for use with closed-cycle cryogenic refrigerators. The Dayem bridge form of device has inherent advantages of stability and reproducibility. Dayem bridges were made from thin films of NbN and Mo-Re alloy. The Mo-Re junctions exhibit Josephson phenomena up to 12.6 K. A cryo-refrigerator usable with junctions of this type was evaluated. (Author) (GRA)
A novel process suitable for fabrication superconducting circuitry based on the all refactory material NbN is described. In this process, and in-situ trilayer film composed of NbN/MgO/NbN is used to fabricate Josephson tunnel junctions. Reactive ion etching processes are used to delineate devices and pattern insulators and metallizations. Fabricated junctions have yielded good tunneling characteristics with reasonable current density uniformity and reproducibility. Devices with gap voltages close to 3mV have been achieved for high quality junctions (Vm 20 mV). In addition to the trilayer, there are two wiring layers, two resistor depositions, and two insulation layers, constituting a full NbN based fabrication technology. Using this process, we fabricated and successfully tested thin film DC SQUID and time domain reflectometer (TDR) circuits. Preliminary measurements suggest that the critical temperature of these circuits is well within the operating temperature of commercial two-stage closed cycle refrigerators. (Author)
Optimization of the performance of Nb-based overdamped Josephson junctions for applications to superconducting electronics is a major issue today. The use of cryocoolers, thus avoiding liquid helium refrigeration, with junctions working at temperatures higher than 4.2 K, could greatly increase the use of these devices in applications such as fundamental metrology and measurement sensors. The question we address here is how to maximize the characteristic voltage and minimize the temperature influence on the current-voltage curves of overdamped junctions enabling their use at T > 4.2K. To optimize the properties of a single Josephson heterostructure, we propose a type of overdamped junction that consists of a relatively thin insulating layer and a thick (tens of nm) normal-metal film between two superconducting electrodes. Measurements of the dependence of the critical current and characteristic voltage as function of temperature for dierent electrodes configurations show how it is possible to improve the design of these junctions.
A novel process suitable for fabricating superconducting circuitry based on the all refractory material NbN is described. In this process, an in-situ trilayer film composed of NbN/MgO/NbN is used to fabricate Josephson tunnel junctions. Reactive ion etching processes are used to delineate devices and pattern insulators and metallizations. Fabricated junctions have yielded good tunneling characteristics with reasonable current density uniformity and reproducibility. Devices with gap voltages close to 5mV have been achieved for high quality junctions. In addition to the trilayer, there are two wiring layers, two resistor depositions, and two insulation layers, constituting a full NbN based fabrication technology. Using this process, we fabricated and successfully tested thin film DC SQUID and time domain reflectometer (TDR) circuits. Preliminary measurements suggest that the critical temperature of these circuits is well within the operating temperature of commercial two-stage closed cycle refrigerators.
Here, we demonstrate superconducting Dayem-bridge weak-links made of different stoichiometric compositions of NbRe. Our devices possess a relatively high critical temperature, normal-state resistance, and kinetic inductance. In particular, the high kinetic inductance makes this material a good alternative to more conventional niobium-based superconductors (e.g., NbN or NbTiN) for the realization of superinductors and high-quality factor resonators, whereas the high normal-state resistance yields a large output voltage in superconducting switches and logic elements realized upon this compound. Moreover, out-of-plane critical magnetic fields exceeding 2 T ensure that possible applications requiring high magnetic fields can also be envisaged. Altogether, these features make this material appealing for a number of applications in the framework of quantum technologies.
Niobium carbonitride (NbCN) Josephson circuits can operate over a wider temperature range than either niobium or niobium nitride circuits. Higher operating temperature places NbCN technology more comfortably within the range of closed-cycle refrigerators, a key factor in aerospace applications. Tunnel junctions have been fabricated from NbCN films with transition temperatures up to 18 K. High-quality NbCN tunnel junction fabrication generally requires low stress films with roughness less than the barrier thickness ( approximately=20 AA). Scanning tunneling microscopy was developed as a tool for measuring and optimizing film smoothness. Junctions formed in situ with AlN tunneling barriers show reproducible I-V characteristics. Unlike NbN, NbCN oxidizes readily, enabling junction definition by a modified SNAP process. This SNAP lithography technique successfully produced NbCn/AlN/NbCN junctions with V/sub m/ values (at 3 mV) up to 27 mV.