Crosstalk remains a major obstacle to building scalable and fault-tolerant quantum computers. Conventional diagnostic techniques-often based on numerical simulation or statistical modeling-struggle to scale with hardware complexity and offer limited interpretability. In this work, we present a visual analytics framework for diagnosing qubit crosstalk using lightweight, circuit-based models integrated with an interactive user interface. Our approach quantifies correlations between active and idle qubits under parameterized single- and twoqubit operations, enabling detection of both spatial and gateinduced crosstalk. The system incorporates qubit topology and gate performance data to support sector-based exploration and correlation mapping. This tool assists users in identifying correlated error sources, informing qubit placement strategies, and guiding noise-aware circuit design.
Crosstalk remains a major obstacle to building scalable and fault-tolerant quantum computers. Conventional diagnostic techniques-often based on numerical simulation or statistical modeling-struggle to scale with hardware complexity and offer limited interpretability. In this work, we present a visual analytics framework for diagnosing qubit crosstalk using lightweight, circuit-based models integrated with an interactive user interface. Our approach quantifies correlations between active and idle qubits under parameterized single- and twoqubit operations, enabling detection of both spatial and gateinduced crosstalk. The system incorporates qubit topology and gate performance data to support sector-based exploration and correlation mapping. This tool assists users in identifying correlated error sources, informing qubit placement strategies, and guiding noise-aware circuit design.
Crosstalk remains a major source of correlated error in quantum systems, yet lacks a precise, community-wide definition - hindering systematic analysis and mitigation. This paper introduces a model-driven approach to crosstalk characterisation through three architecture-inspired noise models: (1) simultaneous two-qubit gate execution, (2) shared qubit interference, and (3) proximity-induced noise from shared control or readout hardware. These models act as both diagnostic tools and building blocks for crosstalk-aware quantum programming. We assess their impact across a broad benchmark suite - quantum simulation, Grover's algorithm, and fault-tolerant primitives like surface, Shor, and Steane codes - and evaluate two mitigation techniques: dynamical decoupling and Pauli twirling. While both are discussed in literature, only dynamical decoupling consistently enhances fidelity across noise types. Our work links low-level noise effects to high-level software engineering, underscoring the role of hardware-software co-design in scalable quantum computing. Model-based, hardware-aware design flows and composable noise abstractions improve error mitigation and program portability. Integrating such strategies into the toolchain is essential for building resilient quantum programs under realistic noise conditions.
Quantum computing has entered a stage of increasing practicality. Many quantum hardware vendors such as IBM, Rigetti, Honeywell, and IonQ now enable experiments on real devices in the Noisy Intermediate-Scale Quantum (NISQ) era. These platforms show computational advantages in domains such as optimization, machine learning, and materials science. However, they remain limited by hardware noise and the absence of human-interpretable information. Existing visual metaphors, such as the Bloch Sphere for single-qubit states or circuit schematics for algorithm design, struggle to convey multi-qubit entanglement or measurement probabilities in ways accessible to human reasoning. Likewise, the rise of variational quantum circuits and quantum neural networks (QNNs) introduces new layers of opacity: how data are encoded into quantum states and how parameters evolve through training remain largely under-explored. These challenges motivate a need for visual explanation frameworks that unveil the invisible processes of quantum computing visible, interpretable, and reasonable.To address these challenges, this dissertation presents a coherent sequence of visual analytics systems that progressively enhance explainability across the hardware, state, circuit, and model layers of quantum computing. First, VACSEN supports noise-aware execution by visually correlating hardware fidelity metrics with compiled quantum circuits, allowing users to identify unstable qubits, track temporal noise evolution, and select optimal execution strategies. Second, VENUS introduces a geometric representation for quantum state visualization, combining right triangles and semicircles to jointly encode amplitude and probability information, thereby enabling intuitive exploration of superposition and entanglement beyond the traditional Bloch Sphere. Third, QuantumEyes extends interpretability to quantum circuit behavior, integrating coordinated views to reveal how quantum gates transform amplitudes and probabilities during algorithm execution (e.g., Grover’s search or the Quantum Fourier Transform). Finally, VIOLET applies visual explainability to quantum neural networks, bridging concepts from explainable AI and quantum computing. It visualizes the encoding of classical data into quantum states, tracks parameter dynamics during variational training, and exposes learned features and measurement distributions, establishing the first end-to-end system for understanding QNNs.Each system was designed through iterative co-design with quantum computing experts and evaluated through case studies, task analyses, and in-depth interviews involving researchers and practitioners from academia and industry. Across evaluations, participants reported that visualization significantly enhanced their ability to reason about noise effects, understand quantum-state evolution, and interpret the learning behavior of QNNs. These findings demonstrate that visualization not only accelerates analysis and debugging but also strengthens conceptual understanding and user trust in quantum computing. To sum up, this dissertation establishes visualization
Driven by potential exponential speedups in business, security, and scientific scenarios, interest in quantum computing is surging. This interest feeds the development of quantum computing hardware, but several challenges arise in optimizing application performance for hardware metrics (e.g., qubit coherence and gate fidelity). In this work, we describe a visual analytics approach for analyzing the performance properties of quantum devices and quantum circuit optimization. Our approach allows users to explore spatial and temporal patterns in quantum device performance data and it computes similarities and variances in key performance metrics. Detailed analysis of the error properties characterizing individual qubits is also supported. We also describe a method for visualizing the optimization of quantum circuits. The resulting visualization tool allows researchers to design more efficient quantum algorithms and applications by increasing the interpretability of quantum computations.
Achieving high-fidelity execution on noisy intermediate-scale quantum (NISQ) hardware requires careful selection of physical qubit layouts, as gate errors, readout errors, and coherence times vary across the device and drift over time. Currently, qubit mapping is performed either through manual inspection of device calibration data or through automated layout pipelines, neither of which provides integrated, interactive layout visualization combined with calibration analytics. In this work, we present the Interactive Quantum Mapper (I-QMapper), a Jupyter-based, open-source tool for noise-aware layout selection, visualization, and analysis on superconducting quantum hardware. I-QMapper offers two operating modes: a general-purpose mode for arbitrary circuits, and a dedicated mode for quantum-chemistry applications, specifically tailored to the Local Unitary Cluster Jastrow (LUCJ) ansatz. Within each mode, a Design panel supports interactive layout construction, while an Error panel provides calibration analytics through four temporal viewing modes (Live, Snapshot, Intraday, and Multi-day range) together with threshold filtering and delta-mode comparison for drift identification. Each layout receives a Layout-Quality Score (LQS) that aggregates the readout and two-qubit gate errors of the layout into a single quality value. Starting from the automatic LUCJ circuit-generation provided by IBM Quantum, we extend it to a multi-programming setting in which multiple circuits are mapped onto a single quantum processing unit (QPU). I-QMapper further supports side-by-side visualization of two quantum backends and layout comparison, and session export for experimental reproducibility. By combining interactive exploration with calibration analytics, I-QMapper aims to support both rapid layout prototyping and informed noise-aware experimental design on NISQ devices.
The design and performance analysis of quantum error correction (QEC) codes are often based on incoherent and independent noise models since it is easy to simulate. However, these models fail to capture realistic hardware noise sources, such as correlated errors (crosstalk), which can significantly impact QEC code performance, especially when they occur between data and ancillary qubits. In this paper, we systematically study various types of crosstalk noise and quantify their effects on surface codes through memory and stability experiments. Based on our findings, we introduce crosstalk-robust implementations of QEC via flag qubit designs and redundant stabilizer checks. We perform both numerical and analytical studies to demonstrate the efficacy of these strategies. In addition, we analyze logical crosstalk in an[[n,k>1,d]]code block and establish analytical conditions under which physical crosstalk does not lead to logical crosstalk. Together, our analytical and numerical results shed light on designing QEC codes that are robust against hardware realistic crosstalk noise, paving the way for reliable experimental realization of fault-tolerant quantum computing.
Quantum computers offer promising approaches to various fields. To use current noisy quantum computers, developers need to examine the compilation of a logical circuit, the status of available hardware, and noises in results. As those tasks are less common in classical computing, quantum developers may not be familiar with performing them. Therefore, easier and more intuitive interfaces are necessary to make quantum computers more approachable. While existing notebook-based toolkits like Qiskit offer application programming interfaces and visualization techniques, it is still difficult to navigate the vast space of quantum program design and hardware status. Inspired by human-computer interaction (HCI) work in data science and visualization, our work introduces four user interaction techniques that can augment existing notebook-based toolkits for gate-based quantum computing: (1) a circuit writer that lets users provide high-level information about a circuit and generates a code snippet to build it; (2) a machine explorer that provides detailed properties and configurations of a hardware with a code to load selected information; (3) a circuit viewer that allows for comparing logical circuit, compiled circuit, and hardware configurations; and (4) a visualization for adjusting measurement outcomes with hardware error rates.