Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Nature

Material system enhances superconducting qubits

Published Nov 12, 2025• 0 citations
Publisher

Abstract

In the development of large-scale quantum processors, material improvements yield rapid progress because they can be readily translated to many devices and platforms. This work shows that, if they are built from tantalum and silicon, superconducting qubits can have millisecond-scale lifetimes and coherence times and reduced fabrication-related contamination. Material improvements lead to a step towards practical quantum computing.

DOI
10.1038/d41586-025-03644-x

Related papers

New material platform for superconducting transmon qubits with coherence times exceeding 0.3 milliseconds

Alexander P. M. Place, Lila V. H. Rodgers, Pranav Mundada +18 more

The superconducting transmon qubit is a leading platform for quantum computing and quantum science. Building large, useful quantum systems based on transmon qubits will require significant improvements in qubit relaxation and coherence times, which are orders of magnitude shorter than limits imposed by bulk properties of the constituent materials. This indicates that relaxation likely originates from uncontrolled surfaces, interfaces, and contaminants. Previous efforts to improve qubit lifetimes have focused primarily on designs that minimize contributions from surfaces. However, significant improvements in the lifetime of two-dimensional transmon qubits have remained elusive for several years. Here, we fabricate two-dimensional transmon qubits that have both lifetimes and coherence times with dynamical decoupling exceeding 0.3 milliseconds by replacing niobium with tantalum in the device. We have observed increased lifetimes for seventeen devices, indicating that these material improvements are robust, paving the way for higher gate fidelities in multi-qubit processors.

arXiv:2003.00024•Nature Communications•Mar 19, 2021•562 citations

Superconducting Qubits

Stefano Poletto, Angela Q. Chen

Abstract Superconducting qubits are multilevel micro-fabricated artificial atoms based on superconducting materials. They are mainly operated in the low microwave frequency range (2–8 GHz) and require to be cooled below 20 mK to maintain quantum coherence. They enable precise engineering of transition frequencies and coupling strengths, facilitating advancements in quantum information processing and light-matter interactions. The field has evolved from early devices, characterized by short coherence times, to modern architectures with improved noise resilience, scalability, and fidelity. Better performances have been achieved through innovations in materials, fabrication, control electronics, and circuit design, enabling qubits with millisecond coherence times and gate fidelities exceeding 99.9%. However, challenges remain in mitigating two-level system defects, scaling devices, and addressing the cryogenic and infrastructure needs of larger quantum processing units. Current research focuses on modular and scalable architectures, error correction, and application. The field’s progress highlights the potential for superconducting qubits to drive advancements in quantum computation.

Springer eBooks•Dec 1, 2025•0 citations

Towards practical quantum computers: transmon qubit with a lifetime approaching 0.5 milliseconds

Chenlu Wang, Xuegang Li, Huikai Xu +25 more

Abstract Here we report a breakthrough in the fabrication of a long lifetime transmon qubit. We use tantalum films as the base superconductor. By using a dry etching process, we obtained transmon qubits with a best T1 lifetime of 503 μs. As a comparison, we also fabricated transmon qubits with other popular materials, including niobium and aluminum, under the same design and fabrication processes. After characterizing their coherence properties, we found that qubits prepared with tantalum films have the best performance. Since the dry etching process is stable and highly anisotropic, it is much more suitable for fabricating complex scalable quantum circuits, when compared to wet etching. As a result, the current breakthrough indicates that the dry etching process of tantalum film is a promising approach to fabricate medium- or large-scale superconducting quantum circuits with a much longer lifetime, meeting the requirements for building practical quantum computers.

npj Quantum Information•Jan 13, 2022•375 citations

219Chapter 9 Materials science for superconducting and photonic qubits

Shalini Devendrababu, Vaishnavi Chandilkar

Superconducting and photonic qubits are the two promising platforms for quantum computation. This review investigates different materials that are being used to advance these platforms, detailing the structural, electrical, and thermal properties that influence qubit performance. The discussion on superconducting qubits covers material properties critical for achieving low-loss circuits, the impact of two-level system defects, and the engineering of Josephson junctions. In contrast, photonic qubits, which leverage light for quantum information processing, are examined through the lens of material platforms such as silicon-based photonics and III–V semiconductors. The chapter also highlights fabrication challenges, qubit coherence improvements, and recent advances in single-photon sources for scalable quantum systems. By analyzing the intersection of materials science, quantum mechanics, and device engineering, this review provides insights into the optimization of quantum hardware for future large-scale quantum computing applications.

De Gruyter eBooks•Apr 23, 2025•0 citations

Fabrication Technologies for Superconducting Quantum Circuits for Large-scale Quantum Computing

Hirotaka Terai, Wei Qiu, Taro Yamashita

The superconducting qubit technology based on Josephson junctions is a promising platform for realizing quantum computers. Since being first demonstrated, the coherence time of superconducting qubits has improved from 10 ns to 100 μs over the past 18 years. As a result, high-fidelity qubit operations in a scalable architecture are now becoming possible. In this article, we introduce recent progress in the fabrication process of superconducting qubits for large-scale quantum computation.

TEION KOGAKU (Journal of Cryogenics and Superconductivity Society of Japan)•Aug 20, 2018•0 citations

Key ingredients for manufacturing superconducting quantum processors at scale

Thorsten Last, Massimo Mongillo, Tsvetan Ivanov +6 more

Computational ecosystems in which classical supercomputers and general-purpose quantum computers provide a steady increase in value-creating computation capabilities have shown immense progress in recent years. Superconducting qubit technology, in particular, has emerged as a leading candidate for realizing a scalable quantum computing platform ready for paving the way to commercial quantum advantage. However, current academic approaches in fabrication and testing of quantum devices are not scalable and have already started to limit the rapid development of the field. Novel solutions are required to tackle the combined challenge of increasing the qubit count on a quantum processor and the need to further reduce the qubit’s error rates. This, in turn, will lead to a renewed acceleration in qubit manufacturing, test and diagnostics. Here we present aspects of how to move superconducting qubit manufacturing and testing from small-scale laboratory to large-scale fabrication facility environments. To enable this transfer, two key ingredients are demonstrated: (i) A foundry-compatible fabrication process of superconducting qubits that can benefit from the advanced process control in industry-scale CMOS fabrication facilities, and (ii) an acceleration of testing and cryogenic measurement throughput by using a milli-Kelvin cryo-CMOS signal multiplexer operating in near proximity to quantum devices and integrated qubit diagnostic and benchmarking tools with end-to-end data analytics. Although some of these elements have been explored independently, co-development is crucial to enable an efficient scalable development cycle for quantum computing technology. A full development cycle consisting of scalable manufacturing, testing, and benchmarking will enable the large-scale fabrication and control of quantum computing devices and thus pave the way to commercial quantum advantage.

SPIE Novel Patterning Technologies•May 1, 2023•5 citations
In the development of large-scale quantum processors, material improvements yield rapid progress because they can be readily translated to many devices and platforms. This work shows that, if they are built from tantalum and silicon, superconducting qubits can have millisecond-scale lifetimes and coherence times and reduced fabrication-related contamination. Material improvements lead to a step towards practical quantum computing.
The superconducting transmon qubit is a leading platform for quantum computing and quantum science. Building large, useful quantum systems based on transmon qubits will require significant improvements in qubit relaxation and coherence times, which are orders of magnitude shorter than limits imposed by bulk properties of the constituent materials. This indicates that relaxation likely originates from uncontrolled surfaces, interfaces, and contaminants. Previous efforts to improve qubit lifetimes have focused primarily on designs that minimize contributions from surfaces. However, significant improvements in the lifetime of two-dimensional transmon qubits have remained elusive for several years. Here, we fabricate two-dimensional transmon qubits that have both lifetimes and coherence times with dynamical decoupling exceeding 0.3 milliseconds by replacing niobium with tantalum in the device. We have observed increased lifetimes for seventeen devices, indicating that these material improvements are robust, paving the way for higher gate fidelities in multi-qubit processors.
Abstract Superconducting qubits are multilevel micro-fabricated artificial atoms based on superconducting materials. They are mainly operated in the low microwave frequency range (2–8 GHz) and require to be cooled below 20 mK to maintain quantum coherence. They enable precise engineering of transition frequencies and coupling strengths, facilitating advancements in quantum information processing and light-matter interactions. The field has evolved from early devices, characterized by short coherence times, to modern architectures with improved noise resilience, scalability, and fidelity. Better performances have been achieved through innovations in materials, fabrication, control electronics, and circuit design, enabling qubits with millisecond coherence times and gate fidelities exceeding 99.9%. However, challenges remain in mitigating two-level system defects, scaling devices, and addressing the cryogenic and infrastructure needs of larger quantum processing units. Current research focuses on modular and scalable architectures, error correction, and application. The field’s progress highlights the potential for superconducting qubits to drive advancements in quantum computation.
Abstract Here we report a breakthrough in the fabrication of a long lifetime transmon qubit. We use tantalum films as the base superconductor. By using a dry etching process, we obtained transmon qubits with a best T1 lifetime of 503 μs. As a comparison, we also fabricated transmon qubits with other popular materials, including niobium and aluminum, under the same design and fabrication processes. After characterizing their coherence properties, we found that qubits prepared with tantalum films have the best performance. Since the dry etching process is stable and highly anisotropic, it is much more suitable for fabricating complex scalable quantum circuits, when compared to wet etching. As a result, the current breakthrough indicates that the dry etching process of tantalum film is a promising approach to fabricate medium- or large-scale superconducting quantum circuits with a much longer lifetime, meeting the requirements for building practical quantum computers.
Superconducting and photonic qubits are the two promising platforms for quantum computation. This review investigates different materials that are being used to advance these platforms, detailing the structural, electrical, and thermal properties that influence qubit performance. The discussion on superconducting qubits covers material properties critical for achieving low-loss circuits, the impact of two-level system defects, and the engineering of Josephson junctions. In contrast, photonic qubits, which leverage light for quantum information processing, are examined through the lens of material platforms such as silicon-based photonics and III–V semiconductors. The chapter also highlights fabrication challenges, qubit coherence improvements, and recent advances in single-photon sources for scalable quantum systems. By analyzing the intersection of materials science, quantum mechanics, and device engineering, this review provides insights into the optimization of quantum hardware for future large-scale quantum computing applications.
Computational ecosystems in which classical supercomputers and general-purpose quantum computers provide a steady increase in value-creating computation capabilities have shown immense progress in recent years. Superconducting qubit technology, in particular, has emerged as a leading candidate for realizing a scalable quantum computing platform ready for paving the way to commercial quantum advantage. However, current academic approaches in fabrication and testing of quantum devices are not scalable and have already started to limit the rapid development of the field. Novel solutions are required to tackle the combined challenge of increasing the qubit count on a quantum processor and the need to further reduce the qubit’s error rates. This, in turn, will lead to a renewed acceleration in qubit manufacturing, test and diagnostics. Here we present aspects of how to move superconducting qubit manufacturing and testing from small-scale laboratory to large-scale fabrication facility environments. To enable this transfer, two key ingredients are demonstrated: (i) A foundry-compatible fabrication process of superconducting qubits that can benefit from the advanced process control in industry-scale CMOS fabrication facilities, and (ii) an acceleration of testing and cryogenic measurement throughput by using a milli-Kelvin cryo-CMOS signal multiplexer operating in near proximity to quantum devices and integrated qubit diagnostic and benchmarking tools with end-to-end data analytics. Although some of these elements have been explored independently, co-development is crucial to enable an efficient scalable development cycle for quantum computing technology. A full development cycle consisting of scalable manufacturing, testing, and benchmarking will enable the large-scale fabrication and control of quantum computing devices and thus pave the way to commercial quantum advantage.