Integrated quantum photonics (IQP) allows for on-chip generation, manipulation and detection of quantum states of light, fostering advancements in quantum communication, quantum computing, and quantum information technologies. Single-photon detector is a key device in IQP that allows for efficient readout of quantum information through the detection of single-photon statistics and measurement of photonic quantum states. The efficacy of quantum information retrieval hinges on the ability to simultaneously detect every single photon with high efficiency, a relationship that grows exponentially with the number of photons (n). Even a slight decrease in single photon detection efficiency can lead to a significant reduction in probability as n grows larger. Here, we introduce a superconductor-semiconductor heterogeneous integration technology that allows for the integration of transversal superconducting nanowires single-photon detectors that eliminate corner loss on various optical waveguides with exceptional efficiency and versatility. Two cascaded nanowires have been integrated on one silicon waveguide, which not only boosts the detection efficiency to 99.73% at a wavelength of 1550 nm but also provides an on-chip calibration setup, allowing such high efficiency to be measured despite the large loss from fiber-to-waveguide coupling and uncertainties from absolute power calibrations. These advancements represent a substantial improvement compared to previous records, approaching the theoretical limit achievable on silicon waveguide, and demonstrate the versatility of heterogeneous integration technology. This breakthrough in ultra-high detection efficiency establishes a new baseline for assessing quantum measurement capabilities on scalable IQP platforms.
Integrated quantum photonics (IQP) allows for on-chip generation, manipulation and detection of quantum states of light, fostering advancements in quantum communication, quantum computing, and quantum information technologies. Single-photon detector is a key device in IQP that allows for efficient readout of quantum information through the detection of single-photon statistics and measurement of photonic quantum states. The efficacy of quantum information retrieval hinges on the ability to simultaneously detect every single photon with high efficiency, a relationship that grows exponentially with the number of photons (n). Even a slight decrease in single photon detection efficiency can lead to a significant reduction in probability as n grows larger. Here, we introduce a superconductor-semiconductor heterogeneous integration technology that allows for the integration of transversal superconducting nanowires single-photon detectors that eliminate corner loss on various optical waveguides with exceptional efficiency and versatility. Two cascaded nanowires have been integrated on one silicon waveguide, which not only boosts the detection efficiency to 99.73% at a wavelength of 1550 nm but also provides an on-chip calibration setup, allowing such high efficiency to be measured despite the large loss from fiber-to-waveguide coupling and uncertainties from absolute power calibrations. These advancements represent a substantial improvement compared to previous records, approaching the theoretical limit achievable on silicon waveguide, and demonstrate the versatility of heterogeneous integration technology. This breakthrough in ultra-high detection efficiency establishes a new baseline for assessing quantum measurement capabilities on scalable IQP platforms.
Advancements in integrated photonics have enabled the miniaturization and scaling of complex photonic circuits, providing stability and reliability beyond the capabilities of conventional bulk setups. A central component of quantum photonic circuits is the single-photon detector, responsible for quantum state measurement. Due to the stringent performance requirements of quantum applications, superconducting nanowire single-photon detectors (SNSPDs) have emerged as the preferred detection technology, offering superior efficiency, low noise, and high timing resolution. While tabletop SNSPDs are now mature, commercially available and contributed to significant progress in quantum computing and communication, their integration into photonic circuits is still in its infancy. Integrated SNSPDs have shown the potential to not only match but surpass tabletop detectors in several performance metrics. Nevertheless, demonstrations have largely focused on individual integrated detectors, with limited investigation into more complex integrated circuits and advanced functionalities. In this thesis, we present a novel integration platform based on photonic bound states in the continuum (BICs) to address a critical limitation of conventional SNSPD designs, where nanowires placed directly atop the waveguide core are constrained by the core geometry. The etchless nature of our BIC waveguides provides a flat surface that decouples the design of the electronic readout circuitry below from the optical circuit layer above, enabling innovative integrated-nanowire geometries and facilitating large-scale integration of SNSPDs with CMOS-compatible circuits. We established a complete fabrication and characterization workflow for integrating NbTiN-based superconducting nanowires with BIC waveguides. Our integrated detectors achieved state-of-the-art performance, including detection efficiencies exceeding 70%, intrinsic jitter below 70 ps, and ultrafast recovery times (~1.7 ns). These results pave the way toward GHz-rate quantum state measurements, essential for scalable quantum photonic processors. Leveraging the design flexibility of BIC waveguides, we introduce the concept of inline detection with SNSPDs which exploits their unique ability to precisely engineer absorption through nanowire length control. By cascading multiple partially absorbing SNSPDs, it is possible to significantly reduce the number of required optical components and miniaturize complex quantum measurement setups within an extremely compact footprint. Traditional integration geometries prevent such implementations due to significant scattering losses at nanowire terminations, which limit the feasibility of cascaded designs. On the other hand, the design flexibility provided by our BIC platform makes it ideal for development of inline detection schemes. As a proof-of-concept, we use inline detection to miniaturize two fundamental quantum optics tools: an integrated Hanbury Brown and Twiss (HBT) interferometer and a photon-number-resolving (PNR) detector. We replicated the functionalities of these setups using only two nanowires integrated along a single waveguide. These devices show extremely compact footprint, highlighting the scalability potential of our approach. We validated these devices through characterization of a single-photon source and the discrimination of collinear photon pairs. The experimental results aligned well with previous literature and theoretical predictions, confirming the reliability of our integration method. Overall, this work presents a novel approach to quantum measurements within integrated quantum photonic circuits. Inline detection represents a step forward in quantum integrated photonics, moving from individual device demonstrations toward functional quantum circuits. By introducing our BIC-based integration platform, we simplify detector design and fabrication, lowering barriers to the development of inline detection circuits and opening new opportunities in multiphoton quantum state measurements, single-photon spectroscopy, and multiphoton subtraction.
Fast and efficient detection of single photons with high timing accuracy is a crucial requirement in most quantum optics experiments and enables novel sensing and imaging solutions. Superconducting nanowire single-photon detectors (SNSPD) achieve technology-leading performance in terms of detection efficiency, dark count rate, timing jitter, and detector dead times. However, conventional SNSPDs with high system detection efficiency typically rely on resonant enhancement of the absorption efficiency, thus only achieving attractive detector benchmarks over narrow spectral windows. Waveguide-integrated SNSPDs allow for leveraging the wideband material absorption in superconducting nanowires by absorbing light in a traveling-wave geometry but have been limited to low system detection efficiencies due to interface losses when coupling to optical fibers. Here, we show how high system detection efficiencies of 22%–73% are realized over a broad wavelength range from 532 nm to 1640 nm in a single waveguide-integrated SNSPD device. We accomplish efficient coupling between optical fibers and waveguide-integrated nanowire detectors by employing a 3D interface, produced in direct laser writing, that relies on total internal reflection for achieving a broad transmission bandwidth. We further find low timing jitter of 25.7 ps and detector decay times of 9.8 ns, allowing for single-photon counting with high repetition rates up to 100 MHz. Our work paves the way for an efficient single-photon detector solution that combines the spectral requirements of an extremely wide range of quantum optics experiments in a single device. The coupling approach and SNSPD-integration with nanophotonic circuits are further well-suited for realizing large-scale detector arrays.
Quantum technologies and optical sensors with ultimate sensitivity require efficient counting of single photons. Superconducting nanowire single-photon detectors have set leading performance benchmarks in this regard but evolving from stand-alone fiber-coupled detectors to highly integrated receivers with large numbers of photonic channels and configurable optical functionalities has remained a challenge. Here we show how large numbers of superconducting nanowire single-photon detectors with high detection efficiency and low timing jitter can be integrated with nanophotonic circuits. The latter allow for combining photon counting capabilities of superconducting nanowires with active and passive optical control functionalities, such as switching, phase shifting and photon number resolution, which we demonstrate for leading photonic integrated circuit platforms. Broadband optical interconnects produced in 3D direct laser writing enable competitive system detection efficiency, which we can reproduce in a receiver unit that integrates 64 individually addressable superconducting nanowire single-photon detectors. We show that the system is well-suited for massively parallelized quantum key distribution, achieving secret key generation rates beyond 10 Mbit/sec in a field test. Integrating large numbers of superconducting nanowire single photon detectors with optical waveguides on configurable nanophotonic chips offers a wide range of applications in quantum communication, information processing and sensing.
Photonic integrated circuits hold great potential for realizing quantum technology. Efficient single-photon detectors are an essential constituent of any such quantum photonic implementation. In this regard waveguide-integrated superconducting nanowire single-photon detectors are an ideal match for achieving advanced photon counting capabilities in photonic integrated circuits. However, currently considered material systems do not readily satisfy the demands of next generation nanophotonic quantum technology platforms with integrated single-photon detectors, in terms of refractive-index contrast, band gap, optical nonlinearity, thermo-optic stability and fast single-photon counting with high signal-to-noise ratio. Here we show that such comprehensive functionality can be realized by integrating niobium titanium nitride superconducting nanowire single-photon detectors with tantalum pentoxide waveguides. We demonstrate state-of-the-art detector performance in this novel material system, including devices showing 75% on-chip detection efficiency at tens of dark counts per second, detector decay times below 1 ns and sub-30 ps timing accuracy for telecommunication wavelengths photons at 1550 nm. Notably, we realize saturation of the internal detection efficiency over a previously unattained bias current range for waveguide-integrated niobium titanium nitride superconducting nanowire single-photon detectors. Our work enables the full set of high-performance single-photon detection capabilities on the emerging tantalum pentoxide-on-insulator platform for future applications in integrated quantum photonics.
Ultrafast, high-efficiency single-photon detectors are among the most sought-after elements in modern quantum optics and quantum communication. However, imperfect modal matching and finite photon absorption rates have usually limited their maximum attainable detection efficiency. Here we demonstrate superconducting nanowire detectors atop nanophotonic waveguides, which enable a drastic increase of the absorption length for incoming photons. This allows us to achieve high on-chip single-photon detection efficiency up to 91% at telecom wavelengths, repeatable across several fabricated chips. We also observe remarkably low dark count rates without significant compromise of the on-chip detection efficiency. The detectors are fully embedded in scalable silicon photonic circuits and provide ultrashort timing jitter of 18 ps. Exploiting this high temporal resolution, we demonstrate ballistic photon transport in silicon ring resonators. Our direct implementation of a high-performance single-photon detector on chip overcomes a major barrier in integrated quantum photonics. High-efficiency and high-speed single-photon detectors are vital for quantum optical technologies. Using superconducting nanowire detectors on nanophotonic waveguides, Pernice et al.demonstrate on-chip single-photon detection efficiencies up to 91% at telecommunications wavelengths.
Photonic-integrated circuits have emerged as a scalable platform for complex quantum systems. A central goal is to integrate single-photon detectors to reduce optical losses, latency and wiring complexity associated with off-chip detectors. Superconducting nanowire single-photon detectors (SNSPDs) are particularly attractive because of high detection efficiency, sub-50-ps jitter and nanosecond-scale reset time. However, while single detectors have been incorporated into individual waveguides, the system detection efficiency of multiple SNSPDs in one photonic circuit-required for scalable quantum photonic circuits-has been limited to <0.2%. Here we introduce a micrometer-scale flip-chip process that enables scalable integration of SNSPDs on a range of photonic circuits. Ten low-jitter detectors are integrated on one circuit with 100% device yield. With an average system detection efficiency beyond 10%, and estimated on-chip detection efficiency of 14-52% for four detectors operated simultaneously, we demonstrate, to the best of our knowledge, the first on-chip photon correlation measurements of non-classical light.