Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Scientific Reports

Superconducting nanowire single-photon detectors integrated with tantalum pentoxide waveguides

Martin A. Wolff, Simon Vogel, Lukas Johannes Splitthoff, Carsten Schuck

Published Oct 13, 2020• 33 citations
Publisher

Abstract

Photonic integrated circuits hold great potential for realizing quantum technology. Efficient single-photon detectors are an essential constituent of any such quantum photonic implementation. In this regard waveguide-integrated superconducting nanowire single-photon detectors are an ideal match for achieving advanced photon counting capabilities in photonic integrated circuits. However, currently considered material systems do not readily satisfy the demands of next generation nanophotonic quantum technology platforms with integrated single-photon detectors, in terms of refractive-index contrast, band gap, optical nonlinearity, thermo-optic stability and fast single-photon counting with high signal-to-noise ratio. Here we show that such comprehensive functionality can be realized by integrating niobium titanium nitride superconducting nanowire single-photon detectors with tantalum pentoxide waveguides. We demonstrate state-of-the-art detector performance in this novel material system, including devices showing 75% on-chip detection efficiency at tens of dark counts per second, detector decay times below 1 ns and sub-30 ps timing accuracy for telecommunication wavelengths photons at 1550 nm. Notably, we realize saturation of the internal detection efficiency over a previously unattained bias current range for waveguide-integrated niobium titanium nitride superconducting nanowire single-photon detectors. Our work enables the full set of high-performance single-photon detection capabilities on the emerging tantalum pentoxide-on-insulator platform for future applications in integrated quantum photonics.

DOI
10.1038/s41598-020-74426-w

Related papers

Amorphous superconducting nanowire single-photon detectors integrated with nanophotonic waveguides

M. Häußler, M. Yu. Mikhaı̆lov, Martin A. Wolff +1 more

Future applications in integrated quantum photonics will require large numbers of efficient, fast, and low-noise single-photon counters. Superconducting nanowire single-photon detectors made from amorphous material systems are best suited to meet these demands, but the integration with nanophotonic circuits has remained a challenge. Here, we show how amorphous molybdenum silicide (MoSi) nanowires are integrated with nanophotonic silicon nitride waveguides in traveling wave geometry. We found a saturated on-chip detection efficiency of (73 ± 10) % for telecom wavelength photons and the sub-10 Hz dark count rate at a temperature of 2.1 K, which allows for operation in robust, compact, and economic cryogenic systems. Applications requiring fast counting will benefit from the sub-5 ns recovery times of our devices that we combine with 135 ps timing accuracy. Achieving this performance with waveguide-integrated amorphous superconductors is an important step toward enabling high yield fabrication of competitive single-photon detectors on a large variety of nanophotonic material systems.

APL Photonics•Jul 1, 2020•24 citations

Waveguide integrated superconducting single-photon detectors with high internal quantum efficiency at telecom wavelengths

Oliver Kahl, Simone Ferrari, Vadim V. Kovalyuk +3 more

Superconducting nanowire single-photon detectors (SNSPDs) provide high efficiency for detecting individual photons while keeping dark counts and timing jitter minimal. Besides superior detection performance over a broad optical bandwidth, compatibility with an integrated optical platform is a crucial requirement for applications in emerging quantum photonic technologies. Here we present SNSPDs embedded in nanophotonic integrated circuits which achieve internal quantum efficiencies close to unity at 1550 nm wavelength. This allows for the SNSPDs to be operated at bias currents far below the critical current where unwanted dark count events reach milli-Hz levels while on-chip detection efficiencies above 70% are maintained. The measured dark count rates correspond to noise-equivalent powers in the 10(-19) W/Hz(-1/2) range and the timing jitter is as low as 35 ps. Our detectors are fully scalable and interface directly with waveguide-based optical platforms.

Scientific Reports•Jun 10, 2015•111 citations

Broadband waveguide-integrated superconducting single-photon detectors with high system detection efficiency

Martin A. Wolff, Fabian Beutel, Jonas Schütte +4 more

Fast and efficient detection of single photons with high timing accuracy is a crucial requirement in most quantum optics experiments and enables novel sensing and imaging solutions. Superconducting nanowire single-photon detectors (SNSPD) achieve technology-leading performance in terms of detection efficiency, dark count rate, timing jitter, and detector dead times. However, conventional SNSPDs with high system detection efficiency typically rely on resonant enhancement of the absorption efficiency, thus only achieving attractive detector benchmarks over narrow spectral windows. Waveguide-integrated SNSPDs allow for leveraging the wideband material absorption in superconducting nanowires by absorbing light in a traveling-wave geometry but have been limited to low system detection efficiencies due to interface losses when coupling to optical fibers. Here, we show how high system detection efficiencies of 22%–73% are realized over a broad wavelength range from 532 nm to 1640 nm in a single waveguide-integrated SNSPD device. We accomplish efficient coupling between optical fibers and waveguide-integrated nanowire detectors by employing a 3D interface, produced in direct laser writing, that relies on total internal reflection for achieving a broad transmission bandwidth. We further find low timing jitter of 25.7 ps and detector decay times of 9.8 ns, allowing for single-photon counting with high repetition rates up to 100 MHz. Our work paves the way for an efficient single-photon detector solution that combines the spectral requirements of an extremely wide range of quantum optics experiments in a single device. The coupling approach and SNSPD-integration with nanophotonic circuits are further well-suited for realizing large-scale detector arrays.

Applied Physics Letters•Apr 12, 2021•43 citations

NbTiN superconducting nanowire detectors for visible and telecom wavelengths single photon counting on Si3N4 photonic circuits

Carsten Schuck, Wolfram H. P. Pernice, Hong X. Tang

We demonstrate niobium titanium nitride superconducting nanowires patterned on stoichiometric silicon nitride waveguides for detecting visible and infrared photons. The use of silicon nitride on insulator on silicon substrates allows us to simultaneously realize photonic circuits for visible and infrared light and integrate them with nanowire detectors directly on-chip. By implementing a traveling wave detector geometry in this material platform, we achieve efficient single photon detection for both wavelength regimes. Our detectors are an ideal match for integrated quantum optics as they provide crucial functionality on a wideband transparent waveguide material.

arXiv:1302.0786•Applied Physics Letters•Feb 4, 2013•89 citations

Scaling waveguide-integrated superconducting nanowire single-photon detector solutions to large numbers of independent optical channels

Matthias Häußler, Robin Terhaar, Martin A. Wolff +11 more

Superconducting nanowire single-photon detectors are an enabling technology for modern quantum information science and are gaining attractiveness for the most demanding photon counting tasks in other fields. Embedding such detectors in photonic integrated circuits enables additional counting capabilities through nanophotonic functionalization. Here, we show how a scalable number of waveguide-integrated superconducting nanowire single-photon detectors can be interfaced with independent fiber optic channels on the same chip. Our plug-and-play detector package is hosted inside a compact and portable closed-cycle cryostat providing cryogenic signal amplification for up to 64 channels. We demonstrate state-of-the-art multi-channel photon counting performance with average system detection efficiency of (40.5 ± 9.4)% and dark count rate of (123 ± 34) Hz for 32 individually addressable detectors at minimal noise-equivalent power of (5.1 ± 1.2) · 10−18 W/Hz. Our detectors achieve timing jitter as low as 26 ps, which increases to (114 ± 17) ps for high-speed multi-channel operation using dedicated time-correlated single photon counting electronics. Our multi-channel single photon receiver offers exciting measurement capabilities for future quantum communication, remote sensing, and imaging applications.

arXiv:2207.12060•Review of Scientific Instruments•Jan 1, 2023•23 citations

Cavity-Enhanced Superconducting Single Photon Detectors

Julian Münzberg, Andreas Vetter, Wladislaw Hartmann +5 more

Single photon technology is enabling for quantum communication and processing. Combining single photon sources, routing circuitry and highly efficient detectors in a high yield, low-loss and scalable fashion represent today a major challenge. Nanophotonic devices allow for the realization of on-chip small footprint architectures for generating, manipulating and detecting single photons. Waveguide-integrated superconducting nanowire single photon detectors are today state-of-the art devices capable of detecting single photons propagating in an integrated photonic circuit with high efficiency, speed and low timing uncertainty. Their excellent metrics in the near-infrared allows to directly interface on-chip devices with existing C-Band communication technology systems. To move towards high communication speed, efficient detectors able to sustain Gcps count rate are desirable. Here we present the design process and the experimental characterization of a new generation of fast detectors, consisting of µm-long NbN superconducting nanowires embedded in a SOI two-dimensional photonic crystal cavity. Almost 70% efficiency at telecommunication wavelengths has been achieved with negligible dark counts and sub-ns recovery time, which could enable Gcps count rates.

International Conference on Transparent Optical Networks•Jul 1, 2018•0 citations
Photonic integrated circuits hold great potential for realizing quantum technology. Efficient single-photon detectors are an essential constituent of any such quantum photonic implementation. In this regard waveguide-integrated superconducting nanowire single-photon detectors are an ideal match for achieving advanced photon counting capabilities in photonic integrated circuits. However, currently considered material systems do not readily satisfy the demands of next generation nanophotonic quantum technology platforms with integrated single-photon detectors, in terms of refractive-index contrast, band gap, optical nonlinearity, thermo-optic stability and fast single-photon counting with high signal-to-noise ratio. Here we show that such comprehensive functionality can be realized by integrating niobium titanium nitride superconducting nanowire single-photon detectors with tantalum pentoxide waveguides. We demonstrate state-of-the-art detector performance in this novel material system, including devices showing 75% on-chip detection efficiency at tens of dark counts per second, detector decay times below 1 ns and sub-30 ps timing accuracy for telecommunication wavelengths photons at 1550 nm. Notably, we realize saturation of the internal detection efficiency over a previously unattained bias current range for waveguide-integrated niobium titanium nitride superconducting nanowire single-photon detectors. Our work enables the full set of high-performance single-photon detection capabilities on the emerging tantalum pentoxide-on-insulator platform for future applications in integrated quantum photonics.
Future applications in integrated quantum photonics will require large numbers of efficient, fast, and low-noise single-photon counters. Superconducting nanowire single-photon detectors made from amorphous material systems are best suited to meet these demands, but the integration with nanophotonic circuits has remained a challenge. Here, we show how amorphous molybdenum silicide (MoSi) nanowires are integrated with nanophotonic silicon nitride waveguides in traveling wave geometry. We found a saturated on-chip detection efficiency of (73 ± 10) % for telecom wavelength photons and the sub-10 Hz dark count rate at a temperature of 2.1 K, which allows for operation in robust, compact, and economic cryogenic systems. Applications requiring fast counting will benefit from the sub-5 ns recovery times of our devices that we combine with 135 ps timing accuracy. Achieving this performance with waveguide-integrated amorphous superconductors is an important step toward enabling high yield fabrication of competitive single-photon detectors on a large variety of nanophotonic material systems.
Superconducting nanowire single-photon detectors (SNSPDs) provide high efficiency for detecting individual photons while keeping dark counts and timing jitter minimal. Besides superior detection performance over a broad optical bandwidth, compatibility with an integrated optical platform is a crucial requirement for applications in emerging quantum photonic technologies. Here we present SNSPDs embedded in nanophotonic integrated circuits which achieve internal quantum efficiencies close to unity at 1550 nm wavelength. This allows for the SNSPDs to be operated at bias currents far below the critical current where unwanted dark count events reach milli-Hz levels while on-chip detection efficiencies above 70% are maintained. The measured dark count rates correspond to noise-equivalent powers in the 10(-19) W/Hz(-1/2) range and the timing jitter is as low as 35 ps. Our detectors are fully scalable and interface directly with waveguide-based optical platforms.
Fast and efficient detection of single photons with high timing accuracy is a crucial requirement in most quantum optics experiments and enables novel sensing and imaging solutions. Superconducting nanowire single-photon detectors (SNSPD) achieve technology-leading performance in terms of detection efficiency, dark count rate, timing jitter, and detector dead times. However, conventional SNSPDs with high system detection efficiency typically rely on resonant enhancement of the absorption efficiency, thus only achieving attractive detector benchmarks over narrow spectral windows. Waveguide-integrated SNSPDs allow for leveraging the wideband material absorption in superconducting nanowires by absorbing light in a traveling-wave geometry but have been limited to low system detection efficiencies due to interface losses when coupling to optical fibers. Here, we show how high system detection efficiencies of 22%–73% are realized over a broad wavelength range from 532 nm to 1640 nm in a single waveguide-integrated SNSPD device. We accomplish efficient coupling between optical fibers and waveguide-integrated nanowire detectors by employing a 3D interface, produced in direct laser writing, that relies on total internal reflection for achieving a broad transmission bandwidth. We further find low timing jitter of 25.7 ps and detector decay times of 9.8 ns, allowing for single-photon counting with high repetition rates up to 100 MHz. Our work paves the way for an efficient single-photon detector solution that combines the spectral requirements of an extremely wide range of quantum optics experiments in a single device. The coupling approach and SNSPD-integration with nanophotonic circuits are further well-suited for realizing large-scale detector arrays.
We demonstrate niobium titanium nitride superconducting nanowires patterned on stoichiometric silicon nitride waveguides for detecting visible and infrared photons. The use of silicon nitride on insulator on silicon substrates allows us to simultaneously realize photonic circuits for visible and infrared light and integrate them with nanowire detectors directly on-chip. By implementing a traveling wave detector geometry in this material platform, we achieve efficient single photon detection for both wavelength regimes. Our detectors are an ideal match for integrated quantum optics as they provide crucial functionality on a wideband transparent waveguide material.
Superconducting nanowire single-photon detectors are an enabling technology for modern quantum information science and are gaining attractiveness for the most demanding photon counting tasks in other fields. Embedding such detectors in photonic integrated circuits enables additional counting capabilities through nanophotonic functionalization. Here, we show how a scalable number of waveguide-integrated superconducting nanowire single-photon detectors can be interfaced with independent fiber optic channels on the same chip. Our plug-and-play detector package is hosted inside a compact and portable closed-cycle cryostat providing cryogenic signal amplification for up to 64 channels. We demonstrate state-of-the-art multi-channel photon counting performance with average system detection efficiency of (40.5 ± 9.4)% and dark count rate of (123 ± 34) Hz for 32 individually addressable detectors at minimal noise-equivalent power of (5.1 ± 1.2) · 10−18 W/Hz. Our detectors achieve timing jitter as low as 26 ps, which increases to (114 ± 17) ps for high-speed multi-channel operation using dedicated time-correlated single photon counting electronics. Our multi-channel single photon receiver offers exciting measurement capabilities for future quantum communication, remote sensing, and imaging applications.
Single photon technology is enabling for quantum communication and processing. Combining single photon sources, routing circuitry and highly efficient detectors in a high yield, low-loss and scalable fashion represent today a major challenge. Nanophotonic devices allow for the realization of on-chip small footprint architectures for generating, manipulating and detecting single photons. Waveguide-integrated superconducting nanowire single photon detectors are today state-of-the art devices capable of detecting single photons propagating in an integrated photonic circuit with high efficiency, speed and low timing uncertainty. Their excellent metrics in the near-infrared allows to directly interface on-chip devices with existing C-Band communication technology systems. To move towards high communication speed, efficient detectors able to sustain Gcps count rate are desirable. Here we present the design process and the experimental characterization of a new generation of fast detectors, consisting of µm-long NbN superconducting nanowires embedded in a SOI two-dimensional photonic crystal cavity. Almost 70% efficiency at telecommunication wavelengths has been achieved with negligible dark counts and sub-ns recovery time, which could enable Gcps count rates.