© 2026 Aqora Quantum S.A.S.

Terms Privacy Legal Notice

APL Photonics

Achieving GHz system detection rate of photons in highly uniform responding superconducting nanowires coupled with multimode fiber

Jingrou Tan, Haochen Li, Labao Zhang, Yutong Zhang, Qi Henry Chen, Hao Wang, Yi Dai, Zhihao Wang, Qingyuan Zhao, Xiaoqing Jia, Lin Kang, Peiheng Wu

Published Oct 1, 2025• 6 citations

Abstract

Single-photon detectors with high detection rates are the foundation for the high-speed remote laser communication. Although a total detection rate of gigahertz has been achieved with multiple superconducting nanowires, the coupled single-mode fibers are incompatible with most large-aperture optical telescopes, and the uneven response distribution between nanowires also limits the system performance in practice. Here, we report a multimode fiber coupled superconducting nanowire single-photon detector (SNSPD) with a gigahertz detection rate through 16 intertwined niobium nitride nanowires operated at 2.4 K. The SNSPD is coupled with a 62.5 μm multimode fiber through beam compression. Overcoming the interference of speckles in multimode fibers, all nanowires perform highly uniform with narrow distributions of detection efficiencies (5.48% ± 0.136%), achieving a total detection efficiency of 87.6% and a total system detection efficiency of 52.3%, a maximum detection rate of 1.3 Gcps when the efficiency drops by 3 dB, and a highest detection rate of 3.1 Gcps before latching occurs. The significance of the uniform performance of pixels in terms of system speed is verified by modeling the combined detection rate vs the detection efficiency distribution, which is crucial in high-speed laser communication.

DOI: 10.1063/5.0279182

Related papers

High-efficiency 8 × 8 superconducting nanowire single-photon detector array coupled with a 105-μm multimode fiber

Zhen Wan, Jia Huang, You Xiao +8 more

We present an 8 × 8 superconducting nanowire single-photon detector (SNSPD) array that addresses the trade-off between detection efficiency and count rates in large-area devices.The SNSPD array employs a distributed nanowire architecture and a polarization-insensitive optical cavity, when coupled with a 105-μm multimode fiber, achieves a system detection efficiency of 75% at 1064 nm with a count rate of 945 MHz at 3 dB compression and an average timing jitter of <100 ps.This design offers a scalable solution for high-speed photon counting with large-area detection and multimode compatibility.

Chinese Optics Letters•Jan 1, 2025•0 citations

Sixteen-Pixel NbN Nanowire Single Photon Detector Coupled With 300-μm Fiber

Qi Henry Chen, Biao Zhang, Labao Zhang +9 more

Niobium nitride (NbN) nanowires have a high repetition rate and efficiency, making them ideal for superconducting nanowire single photon detectors (SNSPDs). However, it is difficult to fabricate NbN arrays over large areas, which is critical for various applications. This paper describes a 4 × 4 NbN SNSPD array (16 pixels) and optical coupling with a 300-μm-diameter multimode fiber using beam compression technology. This is the first NbN SNSPD coupled with such large-diameter fibers. The designed pixels are positioned as closely as possible (pixel filling factor about 98.5%), almost without dead area between them. This results in a system efficiency of 46% and a quantum efficiency of 94.5% for photons (λ = 1064 nm) coupled from multimode fibers. An intrinsic time resolution of less than 69 ps can be obtained. The proposed high-performance single photon detector is suitable for satellite laser ranging. Furthermore, the proposed system is feasible for large SNSPD arrays with NbN, paving the way for the development of efficient photon cameras with NbN nanowires.

IEEE photonics journal•Nov 21, 2019•12 citations

Broadband waveguide-integrated superconducting single-photon detectors with high system detection efficiency

Martin A. Wolff, Fabian Beutel, Jonas Schütte +4 more

Fast and efficient detection of single photons with high timing accuracy is a crucial requirement in most quantum optics experiments and enables novel sensing and imaging solutions. Superconducting nanowire single-photon detectors (SNSPD) achieve technology-leading performance in terms of detection efficiency, dark count rate, timing jitter, and detector dead times. However, conventional SNSPDs with high system detection efficiency typically rely on resonant enhancement of the absorption efficiency, thus only achieving attractive detector benchmarks over narrow spectral windows. Waveguide-integrated SNSPDs allow for leveraging the wideband material absorption in superconducting nanowires by absorbing light in a traveling-wave geometry but have been limited to low system detection efficiencies due to interface losses when coupling to optical fibers. Here, we show how high system detection efficiencies of 22%–73% are realized over a broad wavelength range from 532 nm to 1640 nm in a single waveguide-integrated SNSPD device. We accomplish efficient coupling between optical fibers and waveguide-integrated nanowire detectors by employing a 3D interface, produced in direct laser writing, that relies on total internal reflection for achieving a broad transmission bandwidth. We further find low timing jitter of 25.7 ps and detector decay times of 9.8 ns, allowing for single-photon counting with high repetition rates up to 100 MHz. Our work paves the way for an efficient single-photon detector solution that combines the spectral requirements of an extremely wide range of quantum optics experiments in a single device. The coupling approach and SNSPD-integration with nanophotonic circuits are further well-suited for realizing large-scale detector arrays.

Applied Physics Letters•Apr 12, 2021•43 citations

Multimode fiber-coupled superconducting nanowire single-photon detector with 70% system efficiency at visible wavelength

Dengkuan Liu, Shigehito Miki, Taro Yamashita +3 more

We report the development of the multimode fiber-coupled superconducting nanowire single-photon detector with high system detection efficiency at visible wavelength. The detector consists of a 10.5-nm-thick and 150-nm-wide NbN nanowire meander fabricated on a Si substrate with a multilayer dielectric mirror and a quarter wavelength cavity for obtaining high optical absorptance. The meander area was 35 µm in diameter and coupled with the GRIN-lensed multimode optical fiber with a core diameter of 50 µm. The system reached detection efficiency of 70% with dark count rate of 100 Hz at the wavelength of 635 nm, 3 dB roll-off response counting rate of 8.5 Mcps, and timing jitter of 76 ps.

Optics Express•Aug 25, 2014•37 citations

High-speed and high-efficiency superconducting nanowire single photon detector array

Danna Rosenberg, Andrew J. Kerman, R. J. Molnar +1 more

Superconducting nanowire single photon detectors (SNSPDs) have separately demonstrated high efficiency, low noise, and extremely high speed when detecting single photons. However, achieving all of these simultaneously has been limited by detector subtleties and tradeoffs. Here, we report an SNSPD system with <80 ps timing resolution, kHz noise count rates, and 76% fiber-coupled system detection efficiency in the low-flux limit at 1550 nm. We present a model for determining the detection efficiency penalty due to the detection recovery time, and we validate our method using experimental data obtained at high count rates. We demonstrate improved performance tradeoffs, such as 68% system detection efficiency, including losses due to detector recovery time, when coupled to a Poisson source emitting 100 million photons per second. Our system can provide limited photon number resolution, continuous cryogen-free operation, and scalability to future imaging and GHz-count-rate applications.

Optics Express•Jan 14, 2013•191 citations

Multimode-fiber-coupled superconducting nanowire single-photon detector for free-space quantum applications

Hongxin Xu, Jiamin Xiong, Chaomeng Ding +8 more

Multimode fiber (MMF)-coupled superconducting nanowire single-photon detectors (SNSPDs) are critical for free-space quantum communication and sensing, yet their performance is severely limited by polarization-dependent detection efficiency and high dark count rate (DCR) arising from thermal photons. Here, we present a transformative solution that addresses both challenges simultaneously. We demonstrate a polarization-insensitive SNSPD based on a dielectric-compensated bilayer nanowire structure, achieving a system detection efficiency (SDE) of 88% at 1.5 μm with a DCR of ∼4.8×10 4 cps for MMF-coupled signals. To mitigate the elevated thermal noise inherent to multimode coupling, we integrate a compact, dual-stage on-fiber filter with a suppression ratio exceeding 60 dB. The packaged device delivers an SDE of 81% with a DCR of only 4 cps, corresponding to an over 11,000-fold SNR enhancement relative to the unfiltered MMF-coupled configuration.

Photonics Research•May 22, 2026•1 citation

Single-photon detectors with high detection rates are the foundation for the high-speed remote laser communication. Although a total detection rate of gigahertz has been achieved with multiple superconducting nanowires, the coupled single-mode fibers are incompatible with most large-aperture optical telescopes, and the uneven response distribution between nanowires also limits the system performance in practice. Here, we report a multimode fiber coupled superconducting nanowire single-photon detector (SNSPD) with a gigahertz detection rate through 16 intertwined niobium nitride nanowires operated at 2.4 K. The SNSPD is coupled with a 62.5 μm multimode fiber through beam compression. Overcoming the interference of speckles in multimode fibers, all nanowires perform highly uniform with narrow distributions of detection efficiencies (5.48% ± 0.136%), achieving a total detection efficiency of 87.6% and a total system detection efficiency of 52.3%, a maximum detection rate of 1.3 Gcps when the efficiency drops by 3 dB, and a highest detection rate of 3.1 Gcps before latching occurs. The significance of the uniform performance of pixels in terms of system speed is verified by modeling the combined detection rate vs the detection efficiency distribution, which is crucial in high-speed laser communication.

We present an 8 × 8 superconducting nanowire single-photon detector (SNSPD) array that addresses the trade-off between detection efficiency and count rates in large-area devices.The SNSPD array employs a distributed nanowire architecture and a polarization-insensitive optical cavity, when coupled with a 105-μm multimode fiber, achieves a system detection efficiency of 75% at 1064 nm with a count rate of 945 MHz at 3 dB compression and an average timing jitter of <100 ps.This design offers a scalable solution for high-speed photon counting with large-area detection and multimode compatibility.

Niobium nitride (NbN) nanowires have a high repetition rate and efficiency, making them ideal for superconducting nanowire single photon detectors (SNSPDs). However, it is difficult to fabricate NbN arrays over large areas, which is critical for various applications. This paper describes a 4 × 4 NbN SNSPD array (16 pixels) and optical coupling with a 300-μm-diameter multimode fiber using beam compression technology. This is the first NbN SNSPD coupled with such large-diameter fibers. The designed pixels are positioned as closely as possible (pixel filling factor about 98.5%), almost without dead area between them. This results in a system efficiency of 46% and a quantum efficiency of 94.5% for photons (λ = 1064 nm) coupled from multimode fibers. An intrinsic time resolution of less than 69 ps can be obtained. The proposed high-performance single photon detector is suitable for satellite laser ranging. Furthermore, the proposed system is feasible for large SNSPD arrays with NbN, paving the way for the development of efficient photon cameras with NbN nanowires.

Fast and efficient detection of single photons with high timing accuracy is a crucial requirement in most quantum optics experiments and enables novel sensing and imaging solutions. Superconducting nanowire single-photon detectors (SNSPD) achieve technology-leading performance in terms of detection efficiency, dark count rate, timing jitter, and detector dead times. However, conventional SNSPDs with high system detection efficiency typically rely on resonant enhancement of the absorption efficiency, thus only achieving attractive detector benchmarks over narrow spectral windows. Waveguide-integrated SNSPDs allow for leveraging the wideband material absorption in superconducting nanowires by absorbing light in a traveling-wave geometry but have been limited to low system detection efficiencies due to interface losses when coupling to optical fibers. Here, we show how high system detection efficiencies of 22%–73% are realized over a broad wavelength range from 532 nm to 1640 nm in a single waveguide-integrated SNSPD device. We accomplish efficient coupling between optical fibers and waveguide-integrated nanowire detectors by employing a 3D interface, produced in direct laser writing, that relies on total internal reflection for achieving a broad transmission bandwidth. We further find low timing jitter of 25.7 ps and detector decay times of 9.8 ns, allowing for single-photon counting with high repetition rates up to 100 MHz. Our work paves the way for an efficient single-photon detector solution that combines the spectral requirements of an extremely wide range of quantum optics experiments in a single device. The coupling approach and SNSPD-integration with nanophotonic circuits are further well-suited for realizing large-scale detector arrays.

We report the development of the multimode fiber-coupled superconducting nanowire single-photon detector with high system detection efficiency at visible wavelength. The detector consists of a 10.5-nm-thick and 150-nm-wide NbN nanowire meander fabricated on a Si substrate with a multilayer dielectric mirror and a quarter wavelength cavity for obtaining high optical absorptance. The meander area was 35 µm in diameter and coupled with the GRIN-lensed multimode optical fiber with a core diameter of 50 µm. The system reached detection efficiency of 70% with dark count rate of 100 Hz at the wavelength of 635 nm, 3 dB roll-off response counting rate of 8.5 Mcps, and timing jitter of 76 ps.

Superconducting nanowire single photon detectors (SNSPDs) have separately demonstrated high efficiency, low noise, and extremely high speed when detecting single photons. However, achieving all of these simultaneously has been limited by detector subtleties and tradeoffs. Here, we report an SNSPD system with <80 ps timing resolution, kHz noise count rates, and 76% fiber-coupled system detection efficiency in the low-flux limit at 1550 nm. We present a model for determining the detection efficiency penalty due to the detection recovery time, and we validate our method using experimental data obtained at high count rates. We demonstrate improved performance tradeoffs, such as 68% system detection efficiency, including losses due to detector recovery time, when coupled to a Poisson source emitting 100 million photons per second. Our system can provide limited photon number resolution, continuous cryogen-free operation, and scalability to future imaging and GHz-count-rate applications.

Multimode fiber (MMF)-coupled superconducting nanowire single-photon detectors (SNSPDs) are critical for free-space quantum communication and sensing, yet their performance is severely limited by polarization-dependent detection efficiency and high dark count rate (DCR) arising from thermal photons. Here, we present a transformative solution that addresses both challenges simultaneously. We demonstrate a polarization-insensitive SNSPD based on a dielectric-compensated bilayer nanowire structure, achieving a system detection efficiency (SDE) of 88% at 1.5 μm with a DCR of ∼4.8×10 4 cps for MMF-coupled signals. To mitigate the elevated thermal noise inherent to multimode coupling, we integrate a compact, dual-stage on-fiber filter with a suppression ratio exceeding 60 dB. The packaged device delivers an SDE of 81% with a DCR of only 4 cps, corresponding to an over 11,000-fold SNR enhancement relative to the unfiltered MMF-coupled configuration.