Methodological Approach to the Characterization of Single-Photon Sources Using a Hanbury Brown–Twiss Interferometer in a Laser-Excited Fluorescence Microscope
The development of quantum-enhanced technologies requires single-photon sources, as well as methods for their characterization and verification. Here, we describe a methodology for measuring the correlation function of a single-photon source using an experimental setup that comprises a laser-excited fluorescence microscope equipped with a Hanbury Brown–Twiss intensity interferometer as one of the detection systems. Measurements of the response function of the device and the reference samples are performed. The second-order autocorrelation function of the exciton state of GaAs quantum dots in AlGaAs nanowires is obtained and reveals a single-photon emission.
The development of quantum-enhanced technologies requires single-photon sources, as well as methods for their characterization and verification. Here, we describe a methodology for measuring the correlation function of a single-photon source using an experimental setup that comprises a laser-excited fluorescence microscope equipped with a Hanbury Brown–Twiss intensity interferometer as one of the detection systems. Measurements of the response function of the device and the reference samples are performed. The second-order autocorrelation function of the exciton state of GaAs quantum dots in AlGaAs nanowires is obtained and reveals a single-photon emission.
Single InAs quantum dot (QD) sample was grown by molecular-beam epitaxy (MBE). The Photoluminescences (PL) of the exciton and biexciton in a single QD were measured at 5 K. The PL intensity as a function of the laser excitation power, the fine structure splittings of the exciton and biexciton, and the corresponding linearly polarized emissions were analyzed. By means of Hanbury-Brown and Twiss (HBT) setup, the photon correlation between the PL of exciton and biexciton were measured, which is gave an evidence of the quantum cascade emissions between biexciton and exciton PL.
We report a 'plug and play' single-photon source based on single quantum dots with an integrated optical fibre output. We attach an optical fibre to the sample surface in order to measure single-dot photoluminescence, which avoids the light coupling between quantum dots and free space. The excitation light (a HeNe Laser) is coupled into the optical fibre to excite the quantum dots, and the emitted photoluminescence is collected with same optical fibre. To verify the emission of single photons, correlation measurements of the luminescence were performed using a Hanbury Brown and Twiss setup with a 50/50 beamsplitter and two single-photoncounting avalanche photodiodes. Clear antibunching with the second-order correlation function at zero time delay less than 0.1 indicates single-photon emission. The devices are stable, and reproducible for an arbitrarily long time, which is very promising for real implementations of quantum key distribution and linear optical quantum computation.
Single InAs quantum dot (QD) sample is grown by molecular-beam epitaxy (MBE), and the photoluminescence (PL) from a single QD at 5 K is measured. By means of Hanbury-Brown and Twiss (HBT) setup, we measure the photon correlation of the PL which indicates that the PL of QD is single-photon emission. This single-photon source is used to demonstrate experimentally the single-photon interference via Mach-Zehnder (MZ) interferometer. In addition, the measured interference and fringe visibility are analyzed by changing the different linear polarization of the photon between two arms of MZ interferometer.
New optical fiber based spectroscopic tools open the possibility to develop more robust and efficient characterization experiments. Spectral filtering and light reflection have been used to produce compact and versatile fiber based optical cavities and sensors. Moreover, these technologies would be also suitable to study N-photon correlations, where high collection efficiency and frequency tunability is desirable. We demonstrated single photon emission of a single quantum dot emitting at 1300 nm, using a Fiber Bragg Grating for wavelength filtering and InGaAs Avalanche Photodiodes operated in Geiger mode for single photon detection. As we do not observe any significant fine structure splitting for the neutral exciton transition within our spectral resolution (46 μeV), metamorphic QD single photon emission studied with our all-fiber Hanbury Brown &Twiss interferometer could lead to a more efficient analysis of entangled photon sources at telecom wavelength. This all-optical fiber scheme opens the door to new first and second order interferometers to study photon indistinguishability, entangled photon and photon cross correlation in the more interesting telecom wavelengths.
In the fields of quantum communications and quantum computing, the transmission of information using single photons guarantees the security of the communication and enables calculations that would be impossible with our "classical" computers. One of the key elements in implementing such protocols is the photon source. It must emit, on demand, one and only one photon with specific quantum properties.The aim of this project is to characterise a source of single and indistinguishable photons, designed and manufactured at CEA-Grenoble, and consisting of an indium arsenide (InAs) semiconductor quantum dot integrated into a gallium arsenide (GaAs) nanocavity. With its low quality factor, the nanocavity enables photons to be extracted efficiently over a wide range of wavelengths (30nm). In addition, thanks to its small mode volume, the spontaneous emission of quantum dots within it can be accelerated by Purcell effect (Purcell factor up to 6).In this manuscript, we first detail the implementation and the optimisation of the experimental setups used to characterise the photons emitted by our sample : microphotoluminescence, radiative lifetime measurement, Hanbury-Brown and Twiss (HBT) experiment and Hong-Ou-Mandel (HOM) experiment. Then, we present the experimental results obtained for photons emitted by two distinct quantum dots : One containing neutral exciton states, and the second, containing a charged exciton state. In order to photo-create these exciton states in the quantum dots, two pulsed optical excitation schemes were implemented: the two-photon resonant excitation of the neutral biexciton, and the phonon-assisted quasi-resonant excitation of the neutral and charged excitons. We present the measurement of the three figures of merit of a single photon source for these two quantum dots : the brightness, the single-photon purity and the indistinguishability of the emitted photons. In a second phase, we will focus on the charged exciton state and measure the profile of its emission line and its autocorrelation function under continuous resonant excitation. These results, achieved within the nano-photonics group of the University of Basel, constitute the first demonstration of continuous excitation on these nanostructures, which is a good surprise given their small size.Finally, we will look at the effects of the application of mechanical stress on the energy separation of the two neutral exciton states, known as the "fine structure splitting" (FSS). During the radiative cascade of the neutral biexciton state, the two photons emitted are entangled in polarisation, and the fidelity of the entanglement depends in particular on the FSS. Here, we will consider a second sample, where the InAs quantum dots are embedded in a GaAs photonic nanowire. By bending the nanowire, mechanical stresses are applied to the quantum dots, which will modify the energy of the exciton states. We will present an experimental study aimed at observing a possible effect on the fine structure splitting.In conclusion, we have developed and optimised various experimental setups for characterising photon sources for applications in the fields of quantum communications and quantum computing. For a first version of these photonic nanostructures, the brightness, the single-photon purity and the indistinguishability of the photons emitted by our quantum dots integrated into nanocavities are very encouraging for the future. The next objectives are to improve the nanocavities and to characterise the decoherence phenomena and the mechanical coupling between the quantum dots and these nanostructures.
The authors report a “plug and play” source of single photons, with full integration to a single-mode optical fiber. One end of the fiber is attached to the top of an InGaAs∕GaAs quantum dot wafer. The other end is connected via a wavelength-division multiplexing system to two separate fibers: one for carrying excitation light and the other for emitted light. A Hanbury-Brown and Twiss [Nature (London) 77, 27 (1956)] measurement was performed on the emission from single excitons recombining in the quantum dots. A second-order correlation function at zero time delay of approximately 0.01 indicates a nearly ideal source of single photons. The maximum variation of peak position over 24days is less than 0.1nm.