Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Improved long-term stability of pulsed CPT atomic clocks using a modified combined error signal method

Daba A. Radnatarov, Ivan Gromov, Sergey M Kobtsev, M. Yu. Basalaev, Valeriy I. Yudin

Published Oct 10, 2025• 0 citations
Publisher

Abstract

We present an improved technique for suppressing light shift in pulsed CPT atomic clocks by a method of refining the combined error signal (CES). While our earlier implementation successfully eliminated sensitivity to power fluctuations, it failed to improve long-term stability. Through detailed experimental analysis, we identified the key limiting factors and introduced modifications to the pulse sequence, including phase-constrained transitions, composite pulses, and spatial filtering. These advancements enabled us to significantly enhance long-term frequency stability, bringing it close to the theoretical limit. The results confirm the practical feasibility of robust light-shift suppression in miniaturised atomic clocks.

DOI
10.1117/12.3074320

Related papers

Reduction of light shifts in Ramsey spectroscopy with a combined error signal

M. Shuker, J. W. Pollock, Rodolphe Boudot +4 more

Light-induced frequency shifts can be a key limiting contribution to the mid- and long-term frequency instabilities in atomic clocks. In this letter, we demonstrate the experimental implementation of the combined error signal interrogation protocol to a cold-atom clock based on coherent population trapping (CPT) and Ramsey spectroscopy. The method uses a single error signal that results from the normalized combination of two error signals extracted from two Ramsey sequences of different dark periods. The single combined error signal is used to stabilize the atomic clock frequency. Compared to the standard Ramsey-CPT interrogation, this method reduces the clock frequency sensitivity to light-shift variations by more than one order of magnitude. This method can be applied in various kinds of Ramsey-based atomic clocks, sensors, and instruments.

arXiv:1903.00566•Applied Physics Letters•Apr 8, 2019•27 citations

Active Suppression of the Light Shift in an Atomic Clock Based on Coherent Population Trapping in 87Rb Vapor Using the Phase Jump Technique

Daba A. Radnatarov, Sergey M Kobtsev, Valeriy Andryushkov +4 more

The active suppression of light shift of the reference coherent population trapping (CPT) resonance in 87Rb vapor to improve the long-term stability of compact atomic clocks has been demonstrated experimentally. The approach is based on the phase jump technique used to synthesize an error signal, which is proportional to the light shift of the CPT resonance, from an optical transmission signal. The use of this error signal in an additional feedback loop allows one to stabilize the amplitude of a microwave signal for the phase modulation of laser radiation near a value at which the light shift of the CPT resonance is absent. This technique has made it possible to reduce the long-term instability of CPT atomic clocks in our experiments by a factor of 15 at an integration time of 10 000–20 000 s.

Письма в Журнал экспериментальной и теоретической физики•Apr 15, 2023•0 citations

Reduction of light shifts in a cold-atom CPT clock

Maojie Li, Zhu Ma, Jiatao Wu +5 more

Abstract Light shifts induced during atom–light interactions significantly affect the medium- and long-term frequency stability of atomic clocks. Here, we employ composite laser pulse sequences to mitigate interrogation-induced light shifts in a cold-atom coherent-population-trapping clock. We obtain the anti-symmetry error signal via modulating the local oscillator phase in the free-evolution time of Ramsey interferometry. Utilizing this signal, we employ two feedback loops to simultaneously eliminate light shifts and stabilize the clock frequency using the auto-balanced Ramsey (ABR) spectroscopy scheme. Our experimental results demonstrate that this approach can reduce the clock frequency’s sensitivity to variations in light shifts by implementing four Ramsey sub-sequences. Furthermore, we show that the ABR spectroscopy scheme enhances the long-term frequency stability of the atomic clock when the averaging time τ > 5000 s.

Journal of Physics B Atomic Molecular and Optical Physics•Apr 23, 2024•3 citations

Active Suppression of the Light Shift in an Atomic Clock Based on Coherent Population Trapping in 87Rb Vapor Using the Phase Jump Technique

Daba A. Radnatarov, Sergey M Kobtsev, Valeriy Andryushkov +4 more

The active suppression of light shift of the reference coherent population trapping (CPT) resonance in87Rb vapor to improve the long-term stability of compact atomic clocks has been demonstrated experimentally. The approach is based on the phase jump technique used to synthesize an error signal, which is proportional to the light shift of the CPT resonance, from an optical transmission signal. The use of this error signal in an additional feedback loop allows one to stabilize the amplitude of a microwave signal for the phase modulation of laser radiation near a value at which the light shift of the CPT resonance is absent. This technique has made it possible to reduce the long-term instability of CPT atomic clocks in our experiments by a factor of 15 at an integration time of 10 000–20 000 s.

Journal of Experimental and Theoretical Physics Letters•Apr 1, 2023•9 citations

Protocol for Light-Shift Compensation in a Continuous-Wave Microcell Atomic Clock

Moustafa Abdel Hafiz, Rémy Vicarini, Nicolas Passilly +7 more

Light shifts are known to be an important limitation to the mid- and long-term fractional frequency stability of different types of atomic clocks. In this article, we demonstrate the experimental implementation of an anti-light-shift interrogation protocol onto a continuous-wave (cw) microcell atomic clock based on coherent population trapping (CPT). The method, inspired by the autobalanced Ramsey spectroscopy technique demonstrated in pulsed atomic clocks, consists in the extraction of atomic based information from two successive light-shifted clock frequencies obtained at two different laser-power values. Two error signals, computed from the linear combination of signals acquired along a symmetric sequence, are managed in a dual-loop configuration to generate a clock frequency free from light shift. Using this method, the sensitivity of the clock frequency to both laser-power and microwave-power variations can be reduced by more than an order of magnitude compared to normal operation. In the present experiment, the consideration of the nonlinear light-shift dependence allows enhancement of the light-shift mitigation. The implemented technique allows an improvement of the clock Allan deviation for time scales higher than 1000 s. This method can be applied in various kinds of atomic clocks such as CPT-based atomic clocks, double-resonance $\mathrm{Rb}$ clocks, or cell-stabilized lasers.

arXiv:2005.05096•Physical Review Applied•Sep 8, 2020•38 citations

Combined error signal in Ramsey spectroscopy of clock transitions

V I Yudin, A V Taichenachev, M. Yu. Basalaev +7 more

We have developed a universal method to form the reference signal for the stabilization of arbitrary atomic clocks based on Ramsey spectroscopy. Our approach uses an interrogation scheme of the atomic system with two different Ramsey periods and a specially constructed combined error signal (CES) computed by subtracting two error signals with the appropriate calibration factor. CES spectroscopy allows for perfect elimination of probe-induced light shifts and does not suffer from the effects of relaxation, time-dependent pulse fluctuations and phase-jump modulation errors and other imperfections of the interrogation procedure. The method is simpler than recently developed auto-balanced Ramsey spectroscopy techniques (Sanner et al 2018 Phys. Rev. Lett. 120 053602; Yudin et al 2018 Phys. Rev. Appl. 9 054034), because it uses a single error signal that feeds back on the clock frequency. The use of CES is a general technique that can be applied to many applications of precision spectroscopy.

arXiv:1807.10158•New Journal of Physics•Nov 28, 2018•25 citations
We present an improved technique for suppressing light shift in pulsed CPT atomic clocks by a method of refining the combined error signal (CES). While our earlier implementation successfully eliminated sensitivity to power fluctuations, it failed to improve long-term stability. Through detailed experimental analysis, we identified the key limiting factors and introduced modifications to the pulse sequence, including phase-constrained transitions, composite pulses, and spatial filtering. These advancements enabled us to significantly enhance long-term frequency stability, bringing it close to the theoretical limit. The results confirm the practical feasibility of robust light-shift suppression in miniaturised atomic clocks.
Light-induced frequency shifts can be a key limiting contribution to the mid- and long-term frequency instabilities in atomic clocks. In this letter, we demonstrate the experimental implementation of the combined error signal interrogation protocol to a cold-atom clock based on coherent population trapping (CPT) and Ramsey spectroscopy. The method uses a single error signal that results from the normalized combination of two error signals extracted from two Ramsey sequences of different dark periods. The single combined error signal is used to stabilize the atomic clock frequency. Compared to the standard Ramsey-CPT interrogation, this method reduces the clock frequency sensitivity to light-shift variations by more than one order of magnitude. This method can be applied in various kinds of Ramsey-based atomic clocks, sensors, and instruments.
The active suppression of light shift of the reference coherent population trapping (CPT) resonance in 87Rb vapor to improve the long-term stability of compact atomic clocks has been demonstrated experimentally. The approach is based on the phase jump technique used to synthesize an error signal, which is proportional to the light shift of the CPT resonance, from an optical transmission signal. The use of this error signal in an additional feedback loop allows one to stabilize the amplitude of a microwave signal for the phase modulation of laser radiation near a value at which the light shift of the CPT resonance is absent. This technique has made it possible to reduce the long-term instability of CPT atomic clocks in our experiments by a factor of 15 at an integration time of 10 000–20 000 s.
Abstract Light shifts induced during atom–light interactions significantly affect the medium- and long-term frequency stability of atomic clocks. Here, we employ composite laser pulse sequences to mitigate interrogation-induced light shifts in a cold-atom coherent-population-trapping clock. We obtain the anti-symmetry error signal via modulating the local oscillator phase in the free-evolution time of Ramsey interferometry. Utilizing this signal, we employ two feedback loops to simultaneously eliminate light shifts and stabilize the clock frequency using the auto-balanced Ramsey (ABR) spectroscopy scheme. Our experimental results demonstrate that this approach can reduce the clock frequency’s sensitivity to variations in light shifts by implementing four Ramsey sub-sequences. Furthermore, we show that the ABR spectroscopy scheme enhances the long-term frequency stability of the atomic clock when the averaging time τ > 5000 s.
The active suppression of light shift of the reference coherent population trapping (CPT) resonance in87Rb vapor to improve the long-term stability of compact atomic clocks has been demonstrated experimentally. The approach is based on the phase jump technique used to synthesize an error signal, which is proportional to the light shift of the CPT resonance, from an optical transmission signal. The use of this error signal in an additional feedback loop allows one to stabilize the amplitude of a microwave signal for the phase modulation of laser radiation near a value at which the light shift of the CPT resonance is absent. This technique has made it possible to reduce the long-term instability of CPT atomic clocks in our experiments by a factor of 15 at an integration time of 10 000–20 000 s.
Light shifts are known to be an important limitation to the mid- and long-term fractional frequency stability of different types of atomic clocks. In this article, we demonstrate the experimental implementation of an anti-light-shift interrogation protocol onto a continuous-wave (cw) microcell atomic clock based on coherent population trapping (CPT). The method, inspired by the autobalanced Ramsey spectroscopy technique demonstrated in pulsed atomic clocks, consists in the extraction of atomic based information from two successive light-shifted clock frequencies obtained at two different laser-power values. Two error signals, computed from the linear combination of signals acquired along a symmetric sequence, are managed in a dual-loop configuration to generate a clock frequency free from light shift. Using this method, the sensitivity of the clock frequency to both laser-power and microwave-power variations can be reduced by more than an order of magnitude compared to normal operation. In the present experiment, the consideration of the nonlinear light-shift dependence allows enhancement of the light-shift mitigation. The implemented technique allows an improvement of the clock Allan deviation for time scales higher than 1000 s. This method can be applied in various kinds of atomic clocks such as CPT-based atomic clocks, double-resonance Rb\mathrm{Rb}Rb clocks, or cell-stabilized lasers.
We have developed a universal method to form the reference signal for the stabilization of arbitrary atomic clocks based on Ramsey spectroscopy. Our approach uses an interrogation scheme of the atomic system with two different Ramsey periods and a specially constructed combined error signal (CES) computed by subtracting two error signals with the appropriate calibration factor. CES spectroscopy allows for perfect elimination of probe-induced light shifts and does not suffer from the effects of relaxation, time-dependent pulse fluctuations and phase-jump modulation errors and other imperfections of the interrogation procedure. The method is simpler than recently developed auto-balanced Ramsey spectroscopy techniques (Sanner et al 2018 Phys. Rev. Lett. 120 053602; Yudin et al 2018 Phys. Rev. Appl. 9 054034), because it uses a single error signal that feeds back on the clock frequency. The use of CES is a general technique that can be applied to many applications of precision spectroscopy.