Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

EPJ Web of Conferences

Pushing The Limits of Mid-Wave Infrared Detection with Superconducting Nanowire Single-Photon Detectors

Eitan Oksenberg, Ronan Gourgues, Steffen Meder, Jona Zöllner, Johannes W. N. Los, Jonathan James Finley, Mario Castaneda

Published Jan 1, 2025• 1 citation
Publisher

Abstract

Extending single-photon detection capabilities into the mid- infrared is expected to have far-reaching implications for long-wavelength quantum optics, quantum and free-space communication, astronomy, environmental monitoring, and fundamental molecular sciences. We showcase the development of short-wave infrared (2.2-2.3 µm) and mid- wave infrared (3.0 µm) superconducting nanowire single-photon detectors (SNSPDs). In both wavelength ranges, we venture beyond state-of-the-art and achieve the best-reported system detection efficiencies and specific detectivity. We discuss the challenges in cryogenics, optics, and SNSPD design and use our mid-infrared single-photon detection to characterize emerging materials platforms and quantum emitters in a previously unattainable manner.

DOI
10.1051/epjconf/202533511003

Related papers

Pushing The Limits of Mid-Wave Infrared Detection with Superconducting Nanowire Single-Photon Detectors

Eitan Oksenberg, Ronan Gourgues, Steffen Meder +4 more

Extending single-photon detection capabilities into the mid- infrared is expected to have far-reaching implications for long-wavelength quantum optics, quantum and free-space communication, astronomy, environmental monitoring, and fundamental molecular sciences. We showcase the development of short-wave infrared (2.2-2.3 µm) and mid- wave infrared (3.0 µm) superconducting nanowire single-photon detectors (SNSPDs). In both wavelength ranges, we venture beyond state-of-the-art and achieve the best-reported system detection efficiencies and specific detectivity. We discuss the challenges in cryogenics, optics, and SNSPD design and use our mid-infrared single-photon detection to characterize emerging materials platforms and quantum emitters in a previously unattainable manner.

•Sep 22, 2025•0 citations

Mid-infrared photon counting with superconducting nanowires

D. Morozov, Gregor G. Taylor, Kleanthis Erotokritou +3 more

Superconducting Nanowire Single photon Detectors (SNSPDs) offer unparalleled performance for IR photon counting, combining close to unity quantum efficiency, low intrinsic noise and ultrafast timing jitter. The ability of SNSPDs to count photons in mid-IR band up to 7 um wavelength opens up new possibilities in quantum optics, laser ranging, free space Quantum Key Distribution (QKD) and astronomy. Here we report on development of mid-IR SNSPDs including device design, fabrication, optimisation of superconducting materials and characterisation. We present a characterisation setup covering 1.5 - 4.2 um spectral region based on tuneable optical parametric oscillator with picosecond long pulses. We then demonstrate the viability of mid infrared SNSPDs for a variety of applications and report the results from single photon light detection and ranging (LIDAR) experiment with 2.3 um photons. This work paves the way for future app in free space QKD, deep space communication and astronomy.

Quantum Nanophotonic Materials, Devices, and Systems•Jul 30, 2021•1 citation

Mid-infrared superconducting nanowire single-photon detectors: Potential, progress, and challenges

Gregor G. Taylor, Robert H. Hadfield

The ability to detect single photons in the mid-infrared spectral range (beyond 2 μm wavelength, photon energy below 0.62 eV) is the key to unlocking a range of emerging scientific applications, from remote sensing LIDAR, molecular spectroscopy, and powerful new approaches to dark matter detection. Conventional detector types, such as semiconductor single-photon avalanche diodes, lose sensitivity at such low photon energy. Superconducting materials, with a much lower characteristic energy gap, hold particular promise. In this Perspective, we focus on recent advances in superconducting nanowire single-photon detectors, which have recently extended single-photon sensitivity up to 29 μm (0.043 eV). We discuss the potential for future advances and strategies to overcome challenges to technological development.

Applied Physics Letters•Jan 5, 2026•9 citations

Superconducting nanowire single photon detectors for optical communication and astronomy

Matthew D. Shaw

Superconducting Nanowire Single Photon Detectors (SNSPDs) are the most advanced detectors available for time-resolved single photon counting from the UV to the mid-infrared. We will discuss recent progress in SNSPD development for the ground terminal in NASA’s Deep Space Optical Communication (DSOC) project as well as recent performance advances in other metrics, including the development of kilopixel SNSPD arrays, single-photon sensitivity at mid-infrared wavelengths as long as 10 microns, and SNSPDs with sub-3ps timing jitter. I will discuss a range of new potential scientific applications for SNSPDs, including exoplanet transit spectroscopy, dark matter detection, fluorescence lifetime imaging microscopy, and quantum information science.

X-Ray, Optical, and Infrared Detectors for Astronomy•Dec 14, 2020•1 citation

Superconducting nanowire single photon detectors and detector arrays in the mid-infrared

Varun Boehm Verma, Boris A. Korzh, Emma E. Wollman +8 more

We will discuss recently-developed approaches to improve sensitivity of superconducting nanowire single photon detectors in the mid-infrared, showing saturated internal detection efficiency up to a wavelength of 10 microns. We will also show preliminary data from small 64-element SNSPD arrays with high internal detection efficiency in the midinfrared at 3.5 μm, and will discuss calibration techniques we are developing for measuring system detection efficiency in this region of the spectrum.

Advanced Photon Counting Techniques•May 27, 2022•3 citations

Tungsten Germanide Superconducting Nanowire Single-Photon Detectors with Saturated Internal Detection Efficiency at Wavelengths up to 29 μm

Benedikt Hampel, Daniel Kuznesof, Andrew S. Mueller +13 more

Superconducting nanowire single-photon detectors (SNSPDs) are among the most sensitive single-photon detectors available and have the potential to transform fields ranging from infrared astrophysics to molecular spectroscopy. However, extending their performance into the mid-infrared spectral region - crucial for applications such as exoplanet transit spectroscopy and vibrational fingerprinting of molecules - has remained a major challenge, primarily due to material limitations and scalability constraints. Here, we report on the development of SNSPDs based on tungsten germanide, a novel material system that combines high mid-infrared sensitivity with compatibility for large-scale fabrication. Our detectors exhibit saturated internal detection efficiency at wavelengths up to 29 μm, while using 2.7x thicker films (8 nm vs 3 nm) and up to 4.5x wider nanowires (360 nm vs 80 nm) compared to mid-infrared-optimized SNSPDs fabricated from tungsten silicide. This advance will enable scalable, high-performance single-photon detection in a spectral region that was previously inaccessible, opening new frontiers in remote sensing, thermal imaging, environmental monitoring, molecular physics, and astronomy.

physics.ins-detCross-listedarXiv:2511.20868•Nov 27, 2025
Extending single-photon detection capabilities into the mid- infrared is expected to have far-reaching implications for long-wavelength quantum optics, quantum and free-space communication, astronomy, environmental monitoring, and fundamental molecular sciences. We showcase the development of short-wave infrared (2.2-2.3 µm) and mid- wave infrared (3.0 µm) superconducting nanowire single-photon detectors (SNSPDs). In both wavelength ranges, we venture beyond state-of-the-art and achieve the best-reported system detection efficiencies and specific detectivity. We discuss the challenges in cryogenics, optics, and SNSPD design and use our mid-infrared single-photon detection to characterize emerging materials platforms and quantum emitters in a previously unattainable manner.
Extending single-photon detection capabilities into the mid- infrared is expected to have far-reaching implications for long-wavelength quantum optics, quantum and free-space communication, astronomy, environmental monitoring, and fundamental molecular sciences. We showcase the development of short-wave infrared (2.2-2.3 µm) and mid- wave infrared (3.0 µm) superconducting nanowire single-photon detectors (SNSPDs). In both wavelength ranges, we venture beyond state-of-the-art and achieve the best-reported system detection efficiencies and specific detectivity. We discuss the challenges in cryogenics, optics, and SNSPD design and use our mid-infrared single-photon detection to characterize emerging materials platforms and quantum emitters in a previously unattainable manner.
Superconducting Nanowire Single photon Detectors (SNSPDs) offer unparalleled performance for IR photon counting, combining close to unity quantum efficiency, low intrinsic noise and ultrafast timing jitter. The ability of SNSPDs to count photons in mid-IR band up to 7 um wavelength opens up new possibilities in quantum optics, laser ranging, free space Quantum Key Distribution (QKD) and astronomy. Here we report on development of mid-IR SNSPDs including device design, fabrication, optimisation of superconducting materials and characterisation. We present a characterisation setup covering 1.5 - 4.2 um spectral region based on tuneable optical parametric oscillator with picosecond long pulses. We then demonstrate the viability of mid infrared SNSPDs for a variety of applications and report the results from single photon light detection and ranging (LIDAR) experiment with 2.3 um photons. This work paves the way for future app in free space QKD, deep space communication and astronomy.
The ability to detect single photons in the mid-infrared spectral range (beyond 2 μm wavelength, photon energy below 0.62 eV) is the key to unlocking a range of emerging scientific applications, from remote sensing LIDAR, molecular spectroscopy, and powerful new approaches to dark matter detection. Conventional detector types, such as semiconductor single-photon avalanche diodes, lose sensitivity at such low photon energy. Superconducting materials, with a much lower characteristic energy gap, hold particular promise. In this Perspective, we focus on recent advances in superconducting nanowire single-photon detectors, which have recently extended single-photon sensitivity up to 29 μm (0.043 eV). We discuss the potential for future advances and strategies to overcome challenges to technological development.
Superconducting Nanowire Single Photon Detectors (SNSPDs) are the most advanced detectors available for time-resolved single photon counting from the UV to the mid-infrared. We will discuss recent progress in SNSPD development for the ground terminal in NASA’s Deep Space Optical Communication (DSOC) project as well as recent performance advances in other metrics, including the development of kilopixel SNSPD arrays, single-photon sensitivity at mid-infrared wavelengths as long as 10 microns, and SNSPDs with sub-3ps timing jitter. I will discuss a range of new potential scientific applications for SNSPDs, including exoplanet transit spectroscopy, dark matter detection, fluorescence lifetime imaging microscopy, and quantum information science.
Superconducting nanowire single-photon detectors (SNSPDs) are among the most sensitive single-photon detectors available and have the potential to transform fields ranging from infrared astrophysics to molecular spectroscopy. However, extending their performance into the mid-infrared spectral region - crucial for applications such as exoplanet transit spectroscopy and vibrational fingerprinting of molecules - has remained a major challenge, primarily due to material limitations and scalability constraints. Here, we report on the development of SNSPDs based on tungsten germanide, a novel material system that combines high mid-infrared sensitivity with compatibility for large-scale fabrication. Our detectors exhibit saturated internal detection efficiency at wavelengths up to 29 μm, while using 2.7x thicker films (8 nm vs 3 nm) and up to 4.5x wider nanowires (360 nm vs 80 nm) compared to mid-infrared-optimized SNSPDs fabricated from tungsten silicide. This advance will enable scalable, high-performance single-photon detection in a spectral region that was previously inaccessible, opening new frontiers in remote sensing, thermal imaging, environmental monitoring, molecular physics, and astronomy.