Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics Express

Localization of macroscopic sources of magnetic field using optical fibers doped with nitrogen-vacancy rich sub-micron diamonds and zero-field resonance

Mariusz Mrózek, Adam Filipkowski, Wojciech Gawlik, Ryszard R. Buczynski, Adam M. Wojciechowski, Mariusz Klimczak

Published Aug 19, 2025• 0 citations
Publisher

Abstract

We employ an optical fiber doped with randomly oriented fluorescent sub-micron diamonds and what we believe to be the novel zero-field resonance protocol to collect information on the localization and orientation of a magnetic-field source and its distribution. Many previous demonstrations of diamond-based magnetic field sensing achieved ultrahigh sensitivities down to the fT range warranted by manipulating spin states of the diamond nitrogen vacancy (NV) centers with externally applied radio or microwaves. The application of such oscillating fields is problematic in distributed magnetic-field measurements and may be incompatible with specific targets. Instead of relying on these approaches, we leveraged cross-relaxations of particular spin-state populations of the NV center under a magnetic field, thus observing zero-field resonances and making external radio frequency fields redundant. Combined with an optical fiber sensitive to the magnetic field along its entire length, remote sensing was realized that returned information on the spatial field distribution without using any moving mechanical elements in the detection system. Variation of the spatial parameters of the investigated field was achieved simply by controlling the current in a pair of induction coils easily integrable with optical fibers without limiting the fiber-specific functionality of the optical readout taking place at a fixed location at the optical fiber output. Lifting of the requirements related to the mechanical scanning of the fiber, the application of external fields, and the orientation of the NV centers against the measured field mark a very practical step forward in optically driven magnetic field sensing, not easily achievable with earlier implementations.

DOI
10.1364/oe.567889

Related papers

Localization of macroscopic sources of magnetic field using optical fibers doped with NV-rich sub-micron diamonds and zero-field resonance

Mariusz Mrózek, Adam Filipkowski, Wojciech Gawlik +3 more

We employ an optical fiber doped with randomly oriented fluorescent sub-micron diamonds and the novel zero-field resonance protocol to collect information on the localization and orientation of a magnetic-field source and its distribution. Many previous demonstrations of diamond-based magnetic field sensing achieved ultrahigh sensitivities down to the fT range warranted by manipulating spin states of the diamond nitrogen vacancy (NV) centers with externally applied radio or microwaves. The application of such oscillating fields is problematic in distributed magnetic-field measurements and may be incompatible with specific targets. Instead of relying on these approaches, we leveraged cross-relaxations of particular spin-state populations of the NV center under a magnetic field, thus observing zero-field resonances and making external radio frequency fields redundant. Combined with an optical fiber sensitive to the magnetic field along its entire length, remote sensing was realized that returned information on the spatial field distribution without using any moving mechanical elements in the detection system. Variation of the spatial parameters of the investigated field was achieved simply by controlling the current in a pair of induction coils easily integrable with optical fibers without limiting the fiber-specific functionality of the optical readout taking place at a fixed location at the optical fiber output. Lifting of the requirements related to the mechanical scanning of the fiber, the application of external fields, and the orientation of the NV centers against the measured field mark a very practical step forward in optically driven magnetic field sensing, not easily achievable with earlier implementations.

arXiv:2409.05452•Sep 9, 2024•0 citations

Optical fibers doped with nitrogen-vacancy submicron diamonds as magnetic sensors

Mariusz Mrózek, Adam Filipkowski, Grzegorz Stępniewski +4 more

Coupling NV-rich diamond with optical fibers opens the door to guiding quantum information via the NV center's spin state. While diamond-functionalized fiber sensors have shown excellent sensitivity to localized magnetic fields, their distributed sensing capabilities have been untapped. By embedding diamonds throughout the fiber's core, we create a sensor sensitive to magnetic fields along its entire length. This theoretically allows for distributed optical readout of small magnetic fields. However, challenges remain in pinpointing the source's location and understanding the performance of a sensor where the NV-center fluorescence is detected at a single endpoint, integrating signals from color centers in varying field and microwave conditions. We present a demonstration of distributed magnetic field sensing using a step-index fiber with NV-rich diamonds incorporated throughout the core. By collecting the NV fluorescence at the fiber's output and recording Optically Detected Magnetic Resonance (ODMR) spectra as the excitation source moves, we can map the magnetic field profile along the fiber, accurately locating the field source. This straightforward sensor design holds promise for applications such as magnetic field mapping of integrated circuits in photonics and spintronics.

Workshop on Specialty Optical Fibers and Their Applications (WSOF)•May 29, 2025•0 citations

Magnetically sensitive fiber probe with nitrogen-vacancy center nanodiamonds integrated in a suspended core

Adam Filipkowski, Mariusz Mrózek, Grzegorz Stępniewski +6 more

Efficient collection of photoluminescence arising from spin dynamics of nitrogen vacancy (NV) centers in diamond is important for practical applications involving precise magnetic field or temperature mapping. These goals may be realized by the integration of nanodiamond particles with optical fibers and volumetric doping of the particles alongside the fiber core. That approach combines the advantages of robust axial fixation of NV diamonds with a direct spatial overlap of their fluorescence with the guided mode of the fiber. We developed a suspended core silicate glass fiber with 750 nm-diameter nanodiamonds located centrally in the 1.5 µm-core cross-section along its axis. The developed fiber probe was tested for its magnetic sensing performance in optically detected magnetic resonance measurements using a 24 cm-long fiber sample, with the NV excitation and fluorescence collection from the far ends of the sample and yielding optical readout contrast of 7% resulting in 0.5 µT·Hz-1/2 magnetic field sensitivity, two orders of magnitude better than in earlier designs. Thanks to its improved fluorescence confinement, the developed probe could find application in magnetic sensing over extended fiber length, magnetic field mapping or gradiometry.

Optics Express•May 3, 2022•20 citations

Fluorescent diamond microparticle doped glass fiber for magnetic field sensing

D. Bai, M. H. Huynh, David Simpson +6 more

Diamond containing the nitrogen-vacancy (NV) center is emerging as a significant sensing platform. However, most NV sensors require microscopes to collect the fluorescence signals and therefore are limited to laboratory settings. By embedding micron-scale diamond particles at an annular interface within the cross section of a silicate glass fiber, we demonstrate a robust fiber material capable of sensing magnetic fields. Luminescence spectroscopy and electron spin resonance characterization reveal that the optical properties of NV centers in the diamond microcrystals are well preserved throughout the fiber drawing process. The hybrid fiber presents a low propagation loss of ∼4.0 dB/m in the NV emission spectral window, permitting remote monitoring of the optically detected magnetic resonance signals. We demonstrate NV-spin magnetic resonance readout through 50 cm of fiber. This study paves a way for the scalable fabrication of fiber-based diamond sensors for field-deployable quantum metrology applications.

arXiv:2004.03344•APL Materials•Aug 1, 2020•45 citations

Microwave-free magnetometry based on cross-relaxation resonances in diamond nitrogen-vacancy centers

Ахмеджанов Ринат Абдулхаевич, Л. А. Гущин, Н. А. Низов +4 more

We study cross-relaxation resonances between differently oriented groups of nitrogen-vacancy (NV) centers at small external magnetic fields. These resonances are observed using resonant optical pumping on the NV-center zero phonon line. We suggest a magnetometry protocol that is based on measuring the positions of cross-relaxation resonances on the fluorescence scan. This protocol does not require microwave radiation and can be used to find all components of the unknown magnetic field vector. A room-temperature variant of the protocol with off-resonant optical pumping is also briefly discussed.

Physical Review A•Jul 6, 2017•34 citations

Electron spin manipulation and readout through an optical fiber

И. В. Федотов, Lyubov V. Amitonova, Alexander A. Voronin +6 more

The electron spin of nitrogen--vacancy (NV) centers in diamond offers a solid-state quantum bit and enables high-precision magnetic-field sensing on the nanoscale. Implementation of these approaches in a fiber format would offer unique opportunities for a broad range of technologies ranging from quantum information to neuroscience and bioimaging. Here, we demonstrate an ultracompact fiber-optic probe where a diamond microcrystal with a well-defined orientation of spin quantization NV axes is attached to the fiber tip, allowing the electron spins of NV centers to be manipulated, polarized, and read out through a fiber-optic waveguide integrated with a two-wire microwave transmission line. The microwave field transmitted through this line is used to manipulate the orientation of electron spins in NV centers through the electron-spin resonance tuned by an external magnetic field. The electron spin is then optically initialized and read out, with the initializing laser radiation and the photoluminescence spin-readout return from NV centers delivered by the same optical fiber.

Scientific Reports•Jul 16, 2014•65 citations
We employ an optical fiber doped with randomly oriented fluorescent sub-micron diamonds and what we believe to be the novel zero-field resonance protocol to collect information on the localization and orientation of a magnetic-field source and its distribution. Many previous demonstrations of diamond-based magnetic field sensing achieved ultrahigh sensitivities down to the fT range warranted by manipulating spin states of the diamond nitrogen vacancy (NV) centers with externally applied radio or microwaves. The application of such oscillating fields is problematic in distributed magnetic-field measurements and may be incompatible with specific targets. Instead of relying on these approaches, we leveraged cross-relaxations of particular spin-state populations of the NV center under a magnetic field, thus observing zero-field resonances and making external radio frequency fields redundant. Combined with an optical fiber sensitive to the magnetic field along its entire length, remote sensing was realized that returned information on the spatial field distribution without using any moving mechanical elements in the detection system. Variation of the spatial parameters of the investigated field was achieved simply by controlling the current in a pair of induction coils easily integrable with optical fibers without limiting the fiber-specific functionality of the optical readout taking place at a fixed location at the optical fiber output. Lifting of the requirements related to the mechanical scanning of the fiber, the application of external fields, and the orientation of the NV centers against the measured field mark a very practical step forward in optically driven magnetic field sensing, not easily achievable with earlier implementations.
We employ an optical fiber doped with randomly oriented fluorescent sub-micron diamonds and the novel zero-field resonance protocol to collect information on the localization and orientation of a magnetic-field source and its distribution. Many previous demonstrations of diamond-based magnetic field sensing achieved ultrahigh sensitivities down to the fT range warranted by manipulating spin states of the diamond nitrogen vacancy (NV) centers with externally applied radio or microwaves. The application of such oscillating fields is problematic in distributed magnetic-field measurements and may be incompatible with specific targets. Instead of relying on these approaches, we leveraged cross-relaxations of particular spin-state populations of the NV center under a magnetic field, thus observing zero-field resonances and making external radio frequency fields redundant. Combined with an optical fiber sensitive to the magnetic field along its entire length, remote sensing was realized that returned information on the spatial field distribution without using any moving mechanical elements in the detection system. Variation of the spatial parameters of the investigated field was achieved simply by controlling the current in a pair of induction coils easily integrable with optical fibers without limiting the fiber-specific functionality of the optical readout taking place at a fixed location at the optical fiber output. Lifting of the requirements related to the mechanical scanning of the fiber, the application of external fields, and the orientation of the NV centers against the measured field mark a very practical step forward in optically driven magnetic field sensing, not easily achievable with earlier implementations.
Coupling NV-rich diamond with optical fibers opens the door to guiding quantum information via the NV center's spin state. While diamond-functionalized fiber sensors have shown excellent sensitivity to localized magnetic fields, their distributed sensing capabilities have been untapped. By embedding diamonds throughout the fiber's core, we create a sensor sensitive to magnetic fields along its entire length. This theoretically allows for distributed optical readout of small magnetic fields. However, challenges remain in pinpointing the source's location and understanding the performance of a sensor where the NV-center fluorescence is detected at a single endpoint, integrating signals from color centers in varying field and microwave conditions. We present a demonstration of distributed magnetic field sensing using a step-index fiber with NV-rich diamonds incorporated throughout the core. By collecting the NV fluorescence at the fiber's output and recording Optically Detected Magnetic Resonance (ODMR) spectra as the excitation source moves, we can map the magnetic field profile along the fiber, accurately locating the field source. This straightforward sensor design holds promise for applications such as magnetic field mapping of integrated circuits in photonics and spintronics.
Efficient collection of photoluminescence arising from spin dynamics of nitrogen vacancy (NV) centers in diamond is important for practical applications involving precise magnetic field or temperature mapping. These goals may be realized by the integration of nanodiamond particles with optical fibers and volumetric doping of the particles alongside the fiber core. That approach combines the advantages of robust axial fixation of NV diamonds with a direct spatial overlap of their fluorescence with the guided mode of the fiber. We developed a suspended core silicate glass fiber with 750 nm-diameter nanodiamonds located centrally in the 1.5 µm-core cross-section along its axis. The developed fiber probe was tested for its magnetic sensing performance in optically detected magnetic resonance measurements using a 24 cm-long fiber sample, with the NV excitation and fluorescence collection from the far ends of the sample and yielding optical readout contrast of 7% resulting in 0.5 µT·Hz-1/2 magnetic field sensitivity, two orders of magnitude better than in earlier designs. Thanks to its improved fluorescence confinement, the developed probe could find application in magnetic sensing over extended fiber length, magnetic field mapping or gradiometry.
Diamond containing the nitrogen-vacancy (NV) center is emerging as a significant sensing platform. However, most NV sensors require microscopes to collect the fluorescence signals and therefore are limited to laboratory settings. By embedding micron-scale diamond particles at an annular interface within the cross section of a silicate glass fiber, we demonstrate a robust fiber material capable of sensing magnetic fields. Luminescence spectroscopy and electron spin resonance characterization reveal that the optical properties of NV centers in the diamond microcrystals are well preserved throughout the fiber drawing process. The hybrid fiber presents a low propagation loss of ∼4.0 dB/m in the NV emission spectral window, permitting remote monitoring of the optically detected magnetic resonance signals. We demonstrate NV-spin magnetic resonance readout through 50 cm of fiber. This study paves a way for the scalable fabrication of fiber-based diamond sensors for field-deployable quantum metrology applications.
We study cross-relaxation resonances between differently oriented groups of nitrogen-vacancy (NV) centers at small external magnetic fields. These resonances are observed using resonant optical pumping on the NV-center zero phonon line. We suggest a magnetometry protocol that is based on measuring the positions of cross-relaxation resonances on the fluorescence scan. This protocol does not require microwave radiation and can be used to find all components of the unknown magnetic field vector. A room-temperature variant of the protocol with off-resonant optical pumping is also briefly discussed.
The electron spin of nitrogen--vacancy (NV) centers in diamond offers a solid-state quantum bit and enables high-precision magnetic-field sensing on the nanoscale. Implementation of these approaches in a fiber format would offer unique opportunities for a broad range of technologies ranging from quantum information to neuroscience and bioimaging. Here, we demonstrate an ultracompact fiber-optic probe where a diamond microcrystal with a well-defined orientation of spin quantization NV axes is attached to the fiber tip, allowing the electron spins of NV centers to be manipulated, polarized, and read out through a fiber-optic waveguide integrated with a two-wire microwave transmission line. The microwave field transmitted through this line is used to manipulate the orientation of electron spins in NV centers through the electron-spin resonance tuned by an external magnetic field. The electron spin is then optically initialized and read out, with the initializing laser radiation and the photoluminescence spin-readout return from NV centers delivered by the same optical fiber.