Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics Express

Magnetically sensitive fiber probe with nitrogen-vacancy center nanodiamonds integrated in a suspended core

Adam Filipkowski, Mariusz Mrózek, Grzegorz Stępniewski, Maciej J. Głowacki, Dariusz Pysz, Wojciech Gawlik, Ryszard R. Buczynski, Mariusz Klimczak, Adam M. Wojciechowski

Published May 3, 2022• 20 citations
Publisher

Abstract

Efficient collection of photoluminescence arising from spin dynamics of nitrogen vacancy (NV) centers in diamond is important for practical applications involving precise magnetic field or temperature mapping. These goals may be realized by the integration of nanodiamond particles with optical fibers and volumetric doping of the particles alongside the fiber core. That approach combines the advantages of robust axial fixation of NV diamonds with a direct spatial overlap of their fluorescence with the guided mode of the fiber. We developed a suspended core silicate glass fiber with 750 nm-diameter nanodiamonds located centrally in the 1.5 µm-core cross-section along its axis. The developed fiber probe was tested for its magnetic sensing performance in optically detected magnetic resonance measurements using a 24 cm-long fiber sample, with the NV excitation and fluorescence collection from the far ends of the sample and yielding optical readout contrast of 7% resulting in 0.5 µT·Hz-1/2 magnetic field sensitivity, two orders of magnitude better than in earlier designs. Thanks to its improved fluorescence confinement, the developed probe could find application in magnetic sensing over extended fiber length, magnetic field mapping or gradiometry.

DOI
10.1364/oe.458162

Related papers

Volumetric incorporation of NV diamond emitters in nanostructured F2 glass magneto-optical fiber probes

Adam Filipkowski, Mariusz Mrózek, Grzegorz Stępniewski +10 more

Integration of optically active diamond particles with glass fibers is a powerful method of scaling diamond's magnetic sensing functionality. We propose a novel approach for the integration of diamond particles containing nitrogen-vacancy centers directly into the fiber core. The core is fabricated by stacking the preform from 790 soft glass canes, drawn from a single rod dip-coated with submicron diamond particles suspended in isopropyl alcohol. This enables manual control over the distribution of nanoscale features, here – the diamond particles across the optical fiber core. We verify this by mapping the diamond distribution in the core using confocal microscopy. The particles are separated longitudinally by 12–29 μm, while in the transverse plane a separation of approximately 1.5–2.2 μm is observed, corresponding to the individual cane diameter in the final fiber, and without significant agglomeration. The fiber's magnetic sensitivity is confirmed in optically detected magnetic resonance recorded with a coiled, 60-cm-long fiber sample with readout contrast of 1.3% limited by microwave antenna coverage. Moreover, magnetic-field dependence of the NV─ fluorescence intensity is demonstrated in the absence of microwaves, allowing magnetometric applications with a large (from 0 to 35 mT) B-field dynamic range.

arXiv:2108.13193•Carbon•Apr 11, 2022•27 citations

Fluorescent diamond microparticle doped glass fiber for magnetic field sensing

D. Bai, M. H. Huynh, David Simpson +6 more

Diamond containing the nitrogen-vacancy (NV) center is emerging as a significant sensing platform. However, most NV sensors require microscopes to collect the fluorescence signals and therefore are limited to laboratory settings. By embedding micron-scale diamond particles at an annular interface within the cross section of a silicate glass fiber, we demonstrate a robust fiber material capable of sensing magnetic fields. Luminescence spectroscopy and electron spin resonance characterization reveal that the optical properties of NV centers in the diamond microcrystals are well preserved throughout the fiber drawing process. The hybrid fiber presents a low propagation loss of ∼4.0 dB/m in the NV emission spectral window, permitting remote monitoring of the optically detected magnetic resonance signals. We demonstrate NV-spin magnetic resonance readout through 50 cm of fiber. This study paves a way for the scalable fabrication of fiber-based diamond sensors for field-deployable quantum metrology applications.

arXiv:2004.03344•APL Materials•Aug 1, 2020•45 citations

Efficient Fluorescence Coupling Integrated Fiber Magnetometer Based on Nitrogen Vacancy Centers

Yuhao Li, Li Xia, Junchang Huang

A magnetic field sensor based on a fiber-optic integrated probe at the center of a nitrogen vacancy (NV) is proposed and demonstrated. Fiber optics are utilized to replace all conventional spatial optics while efficiently enabling laser excitation and fluorescence collection from diamond. Optical models were developed to study the fluorescence collection efficiency of diamond. The fiber-coupled probe was simulated and its efficiency was improved to 3.062% compared to the 0.607% fluorescence coupling efficiency of the fiber. The optical probe magnetic resonance (ODMR) phenomenon was successfully observed and significantly improved the magnetic field sensitivity to 5.3 nT/Hz1/2, which proved the feasibility and performance compared with the conventional confocal NV-centered magnetometer.

International Conference on Optical Communications and Networks (ICOCN)•Jul 26, 2024•0 citations

Optical fibers doped with nitrogen-vacancy submicron diamonds as magnetic sensors

Mariusz Mrózek, Adam Filipkowski, Grzegorz Stępniewski +4 more

Coupling NV-rich diamond with optical fibers opens the door to guiding quantum information via the NV center's spin state. While diamond-functionalized fiber sensors have shown excellent sensitivity to localized magnetic fields, their distributed sensing capabilities have been untapped. By embedding diamonds throughout the fiber's core, we create a sensor sensitive to magnetic fields along its entire length. This theoretically allows for distributed optical readout of small magnetic fields. However, challenges remain in pinpointing the source's location and understanding the performance of a sensor where the NV-center fluorescence is detected at a single endpoint, integrating signals from color centers in varying field and microwave conditions. We present a demonstration of distributed magnetic field sensing using a step-index fiber with NV-rich diamonds incorporated throughout the core. By collecting the NV fluorescence at the fiber's output and recording Optically Detected Magnetic Resonance (ODMR) spectra as the excitation source moves, we can map the magnetic field profile along the fiber, accurately locating the field source. This straightforward sensor design holds promise for applications such as magnetic field mapping of integrated circuits in photonics and spintronics.

Workshop on Specialty Optical Fibers and Their Applications (WSOF)•May 29, 2025•0 citations

Miniaturized magnetic-field sensor based on nitrogen-vacancy centers

Sigfrid Lindén Johansson, Dennis Lönard, Isabel Cardoso Barbosa +3 more

The nitrogen-vacancy (NV) center in diamond is a prime candidate for quantum sensing technologies. Here, we present a fully integrated and mechanically robust fiber-based endoscopic sensor with a tip diameter of 1.25 mm . On its tip, a direct laser-writing process is used to secure a diamond containing NV centers above the fiber’s core inside a polymer structure. Additionally, a metallic direct laser-written antenna structure next to the fiber facet allows efficient microwave manipulation of NV-center spins. The sensor achieves a shot-noise-limited magnetic-field sensitivity of 5.9 nT / Hz using a 15 − μ m -sized microdiamond at a microwave power of 50 mW and an optical power of 2.15 mW . Using lock-in techniques, we measure a sensitivity of 51.8 nT / Hz . Furthermore, we introduce a dual-fiber concept that enables, in combination with a direct laser-written structure, independent guiding of excitation and fluorescence light and thus reduces background autofluorescence. Moreover, controlled guiding of excitation light to the diamond while avoiding sample illumination may enable operation in light-sensitive environments such as biological tissue. While the demonstrated sensitivity is achieved using a single-fiber configuration, the dual-fiber approach provides a path toward integrating smaller diamonds, where autofluorescence would otherwise limit performance. We demonstrate the capability of vector magnetic-field measurements in the type of magnetic field used in state-of-the-art ultracold quantum gas experiments, opening a potential arena in which high resolution and high sensitivity are required.

arXiv:2402.19372•Physical Review Applied•Oct 24, 2025•9 citations

Multi-Core Fiber Tip Optical Excitation/Collection of NV-diamond Quantum Magnetic Resonance Sensor

Ksenia Shukhin, David Halfon, Nir Bar‐Gill +1 more

We developed an optical on-axis excitation / off-axis fluorescence collection system utilizing direct 3D-printing of refractive elements on the end-face of a multi-core fiber. The fiber-tip optical element is designed to operate as a highly sensitive magnetic sensor based on the quantum state transitions of nitrogen-vacancy (NV) centers in diamond. The reported optical refractive element is fabricated by direct laser writing and two-photon polymerization. Such a fiber tip mounted magnetic sensor opens a novel paradigm of localized MRI in miniaturized form factor, potentially applicable for biological/medical scenarios.

International Conference on Optical MEMS and Nanophotonics•Jul 28, 2024•0 citations
Efficient collection of photoluminescence arising from spin dynamics of nitrogen vacancy (NV) centers in diamond is important for practical applications involving precise magnetic field or temperature mapping. These goals may be realized by the integration of nanodiamond particles with optical fibers and volumetric doping of the particles alongside the fiber core. That approach combines the advantages of robust axial fixation of NV diamonds with a direct spatial overlap of their fluorescence with the guided mode of the fiber. We developed a suspended core silicate glass fiber with 750 nm-diameter nanodiamonds located centrally in the 1.5 µm-core cross-section along its axis. The developed fiber probe was tested for its magnetic sensing performance in optically detected magnetic resonance measurements using a 24 cm-long fiber sample, with the NV excitation and fluorescence collection from the far ends of the sample and yielding optical readout contrast of 7% resulting in 0.5 µT·Hz-1/2 magnetic field sensitivity, two orders of magnitude better than in earlier designs. Thanks to its improved fluorescence confinement, the developed probe could find application in magnetic sensing over extended fiber length, magnetic field mapping or gradiometry.
Integration of optically active diamond particles with glass fibers is a powerful method of scaling diamond's magnetic sensing functionality. We propose a novel approach for the integration of diamond particles containing nitrogen-vacancy centers directly into the fiber core. The core is fabricated by stacking the preform from 790 soft glass canes, drawn from a single rod dip-coated with submicron diamond particles suspended in isopropyl alcohol. This enables manual control over the distribution of nanoscale features, here – the diamond particles across the optical fiber core. We verify this by mapping the diamond distribution in the core using confocal microscopy. The particles are separated longitudinally by 12–29 μm, while in the transverse plane a separation of approximately 1.5–2.2 μm is observed, corresponding to the individual cane diameter in the final fiber, and without significant agglomeration. The fiber's magnetic sensitivity is confirmed in optically detected magnetic resonance recorded with a coiled, 60-cm-long fiber sample with readout contrast of 1.3% limited by microwave antenna coverage. Moreover, magnetic-field dependence of the NV─ fluorescence intensity is demonstrated in the absence of microwaves, allowing magnetometric applications with a large (from 0 to 35 mT) B-field dynamic range.
Diamond containing the nitrogen-vacancy (NV) center is emerging as a significant sensing platform. However, most NV sensors require microscopes to collect the fluorescence signals and therefore are limited to laboratory settings. By embedding micron-scale diamond particles at an annular interface within the cross section of a silicate glass fiber, we demonstrate a robust fiber material capable of sensing magnetic fields. Luminescence spectroscopy and electron spin resonance characterization reveal that the optical properties of NV centers in the diamond microcrystals are well preserved throughout the fiber drawing process. The hybrid fiber presents a low propagation loss of ∼4.0 dB/m in the NV emission spectral window, permitting remote monitoring of the optically detected magnetic resonance signals. We demonstrate NV-spin magnetic resonance readout through 50 cm of fiber. This study paves a way for the scalable fabrication of fiber-based diamond sensors for field-deployable quantum metrology applications.
A magnetic field sensor based on a fiber-optic integrated probe at the center of a nitrogen vacancy (NV) is proposed and demonstrated. Fiber optics are utilized to replace all conventional spatial optics while efficiently enabling laser excitation and fluorescence collection from diamond. Optical models were developed to study the fluorescence collection efficiency of diamond. The fiber-coupled probe was simulated and its efficiency was improved to 3.062% compared to the 0.607% fluorescence coupling efficiency of the fiber. The optical probe magnetic resonance (ODMR) phenomenon was successfully observed and significantly improved the magnetic field sensitivity to 5.3 nT/Hz1/2, which proved the feasibility and performance compared with the conventional confocal NV-centered magnetometer.
Coupling NV-rich diamond with optical fibers opens the door to guiding quantum information via the NV center's spin state. While diamond-functionalized fiber sensors have shown excellent sensitivity to localized magnetic fields, their distributed sensing capabilities have been untapped. By embedding diamonds throughout the fiber's core, we create a sensor sensitive to magnetic fields along its entire length. This theoretically allows for distributed optical readout of small magnetic fields. However, challenges remain in pinpointing the source's location and understanding the performance of a sensor where the NV-center fluorescence is detected at a single endpoint, integrating signals from color centers in varying field and microwave conditions. We present a demonstration of distributed magnetic field sensing using a step-index fiber with NV-rich diamonds incorporated throughout the core. By collecting the NV fluorescence at the fiber's output and recording Optically Detected Magnetic Resonance (ODMR) spectra as the excitation source moves, we can map the magnetic field profile along the fiber, accurately locating the field source. This straightforward sensor design holds promise for applications such as magnetic field mapping of integrated circuits in photonics and spintronics.
The nitrogen-vacancy (NV) center in diamond is a prime candidate for quantum sensing technologies. Here, we present a fully integrated and mechanically robust fiber-based endoscopic sensor with a tip diameter of 1.25 mm . On its tip, a direct laser-writing process is used to secure a diamond containing NV centers above the fiber’s core inside a polymer structure. Additionally, a metallic direct laser-written antenna structure next to the fiber facet allows efficient microwave manipulation of NV-center spins. The sensor achieves a shot-noise-limited magnetic-field sensitivity of 5.9 nT / Hz using a 15 − μ m -sized microdiamond at a microwave power of 50 mW and an optical power of 2.15 mW . Using lock-in techniques, we measure a sensitivity of 51.8 nT / Hz . Furthermore, we introduce a dual-fiber concept that enables, in combination with a direct laser-written structure, independent guiding of excitation and fluorescence light and thus reduces background autofluorescence. Moreover, controlled guiding of excitation light to the diamond while avoiding sample illumination may enable operation in light-sensitive environments such as biological tissue. While the demonstrated sensitivity is achieved using a single-fiber configuration, the dual-fiber approach provides a path toward integrating smaller diamonds, where autofluorescence would otherwise limit performance. We demonstrate the capability of vector magnetic-field measurements in the type of magnetic field used in state-of-the-art ultracold quantum gas experiments, opening a potential arena in which high resolution and high sensitivity are required.
We developed an optical on-axis excitation / off-axis fluorescence collection system utilizing direct 3D-printing of refractive elements on the end-face of a multi-core fiber. The fiber-tip optical element is designed to operate as a highly sensitive magnetic sensor based on the quantum state transitions of nitrogen-vacancy (NV) centers in diamond. The reported optical refractive element is fabricated by direct laser writing and two-photon polymerization. Such a fiber tip mounted magnetic sensor opens a novel paradigm of localized MRI in miniaturized form factor, potentially applicable for biological/medical scenarios.