Nowadays, security in wireless communication is in high demand. The communication of messages or data should be secure, and various security technologies are used to achieve this. Although there are many advanced cryptographic approaches for securing confidential information, they have one disadvantage: high complexity and computational requirements. To address this drawback, physical layer security has been introduced into wireless networks. This paper provides a brief analysis of various approaches to security (physical security). Two main factors are identified: secrecy rate and security design through optimization. Security design depends on the selection of antennas and nodes, beamforming, and the distance between the source and destination. Based on these factors, optimization approaches for security design are discussed. Four main types of optimization problems are identified: Maximizing the secrecy rate, Minimizing secrecy outage probability, Reducing power consumption, Maximizing secure energy efficiency. The best method to maximize the secrecy rate is cooperative schemes. In the cooperative approach, a relay node is used to enhance security between the source and destination by introducing a noise signal.
Nowadays, security in wireless communication is in high demand. The communication of messages or data should be secure, and various security technologies are used to achieve this. Although there are many advanced cryptographic approaches for securing confidential information, they have one disadvantage: high complexity and computational requirements. To address this drawback, physical layer security has been introduced into wireless networks. This paper provides a brief analysis of various approaches to security (physical security). Two main factors are identified: secrecy rate and security design through optimization. Security design depends on the selection of antennas and nodes, beamforming, and the distance between the source and destination. Based on these factors, optimization approaches for security design are discussed. Four main types of optimization problems are identified: Maximizing the secrecy rate, Minimizing secrecy outage probability, Reducing power consumption, Maximizing secure energy efficiency. The best method to maximize the secrecy rate is cooperative schemes. In the cooperative approach, a relay node is used to enhance security between the source and destination by introducing a noise signal.
Due to the malicious attacks in wireless networks, physical layer security has attracted increasing concerns from both academia and industry. The research on physical layer security mainly focuses either on the secrecy capacity/achievable secrecy rate/capacity-equivocation region from the perspective of information theory, or on the security designs from the viewpoints of optimization and signal processing. Because of its importance in security designs, the latter research direction is surveyed in a comprehensive way in this paper. The survey begins with typical wiretap channel models to cover common scenarios and systems. The topics on physical-layer security designs are then summarized from resource allocation, beamforming/precoding, and antenna/node selection and cooperation. Based on the aforementioned schemes, the performance metrics and fundamental optimization problems are discussed, which are generally adopted in security designs. Thereafter, the state of the art of optimization approaches on each research topic of physical layer security is reviewed from four categories of optimization problems, such as secrecy rate maximization, secrecy outrage probability minimization, power consumption minimization, and secure energy efficiency maximization. Furthermore, the impacts of channel state information on optimization and design are discussed. Finally, the survey concludes with the observations on potential future directions and open challenges.
Physical (PHY) layer security approaches for wireless communications can prevent eavesdropping without upper layer data encryption. However, they are hampered by wireless channel conditions: absent feedback, they are typically feasible only when the source-destination channel is better than the source-eavesdropper channel. Node cooperation is a means to overcome this challenge and improve the performance of secure wireless communications. This paper addresses secure communications of one source-destination pair with the help of multiple cooperating relays in the presence of one or more eavesdroppers. Three cooperative schemes are considered: decode-and-forward (DF), amplify-and-forward (AF), and cooperative jamming (CJ). For these schemes, the relays transmit a weighted version of a reencoded noise-free message signal (for DF), a received noisy source signal (for AF), or a common jamming signal (for CJ). Novel system designs are proposed, consisting of the determination of relay weights and the allocation of transmit power, that maximize the achievable secrecy rate subject to a transmit power constraint, or, minimize the transmit power subject to a secrecy rate constraint. For DF in the presence of one eavesdropper, closed-form optimal solutions are derived for the relay weights. For other problems, since the optimal relay weights are difficult to obtain, several criteria are considered leading to suboptimal but simple solutions, i.e., the complete nulling of the message signals at all eavesdroppers (for DF and AF), or the complete nulling of jamming signal at the destination (for CJ). Based on the designed relay weights, for DF in the presence of multiple eavesdroppers, and for CJ in the presence of one eavesdropper, the optimal power allocation is obtained in closed-form; in all other cases the optimal power allocation is obtained via iterative algorithms. Numerical evaluation of the obtained secrecy rate and transmit power results show that the proposed design can significantly improve the performance of secure wireless communications.
Cooperative jamming is an approach that has been recently proposed for improving physical layer based security for wireless networks in the presence of an eavesdropper. While the source transmits its message to its destination, a relay node transmits a jamming signal to create interference at the eavesdropper. In this paper, a scenario in which the relay is equipped with multiple antennas is considered. A novel system design is proposed for determining the antenna weights and transmit power of source and relay, so that the system secrecy rate is maximized subject to a total transmit power constraint, or, the transmit power is minimized subject to a secrecy rate constraint. Since the optimal solutions to these problems are difficult to obtain, suboptimal closed-form solutions are proposed that introduce an additional constraint, i.e., the complete nulling of jamming signal at the destination.
Motivated by recent developments in wireless communication, this thesis aims to characterize the secrecy performance in several types of typical wireless networks. Advanced techniques are designed and evaluated to enhance physical layer security in these networks with realistic assumptions, such as signal propagation loss, random node distribution and non-instantaneous channel state information (CSI). The first part of the thesis investigates secret communication through relay-assisted cognitive interference channel. The primary and secondary base stations (PBS and SBS) communicate with the primary and secondary receivers (PR and SR) respectively in the presence of multiple eavesdroppers. The SBS is allowed to transmit simultaneously with the PBS over the same spectrum instead of waiting for an idle channel. To improve security, cognitive relays transmit cooperative jamming (CJ) signals to create additional interferences in the direction of the eavesdroppers. Two CJ schemes are proposed to improve the secrecy rate of cognitive interference channels depending on the structure of cooperative relays. In the scheme where the multiple-antenna relay transmits weighted jamming signals, the combined approach of CJ and beamforming is investigated. In the scheme with multiple relays transmitting weighted jamming signals, the combined approach of CJ and relay selection is analyzed. Numerical results show that both these two schemes are effective in improving physical layer security of cognitive interference channel. In the second part, the focus is shifted to physical layer security in a random wireless network where both legitimate and eavesdropping nodes are randomly distributed. Three scenarios are analyzed to investigate the impact of various factors on security. In scenario one, the basic scheme is studied without a protected zone and interference. The probability distribution function (PDF) of channel gain with both fading and path loss has been derived and further applied to derive secrecy connectivity and ergodic secrecy capacity. In the second scenario, we studied using a protected zone surrounding the source node to enhance security where interference is absent. Both the cases that eavesdroppers are aware and unaware of the protected zone boundary are investigated. Based on the above scenarios, further deployment of the protected zones at legitimate receivers is designed to convert detrimental interference into a beneficial factor. Numerical results are investigated to check the reliability of the PDF for reciprocal of channel gain and to analyze the impact of protected zones on secrecy performance. In the third part, physical layer security in the downlink transmission of cellular network is studied. To model the repulsive property of the cellular network planning, we assume that the base stations (BSs) follow the Mat´ern hard-core point process (HCPP), while the eavesdroppers are deployed as an independent Poisson point process (PPP). The distribution function of the distances from a typical point to the nodes of the HCPP is derived. The noise-limited and interference-limited cellular networks are investigated by applying the fractional frequency reuse (FFR) in the system. For the noise-limited network, we derive the secrecy outage probability with two different strategies, i.e. the best BS serve and the nearest BS serve, by analyzing the statistics of channel gains. For the interference-limited network with the nearest BS serve, two transmission schemes are analyzed, i.e., transmission with and without the FFR. Numerical results reveal that both the schemes of transmitting with the best BS and the application of the FFR are beneficial for physical layer security in the downlink cellular networks, while the improvement due
Privacy and security have an increasingly important role in wireless networks. A secure communication enables a legitimate destination to successfully retrieve information sent by a source, while it disables the eavesdropper (illegitimate destination) to interpret the intercepted information. Physical (PHY) layer security approaches for wireless communications can prevent eavesdropping without encryption. It exploits the physical characteristics of the wireless channel in order to transmit messages securely. They are typically feasible when the source-destination channel is better than the source-eavesdropper channel. Cooperative schemes are a means to improve the performance of secure wireless communications. We propose an improved relay selection scheme, based on source-eavesdropper channel SNR restriction, that will guarantee the best secrecy rate at the destination under QoS condition. Performance has been studied in terms of secrecy rate, outage probability and average error probability. Simulations shows that the proposed scheme outperforms in terms of the secrecy rate at the destination when compared to techniques in the literature.
Security has become an increasingly significant and urgent issue in wireless networks. The growing computational capability of the eavesdropper (Eve) and more and more complicated secure key management in large scale and heterogeneous networks, pose more and more stringent requirement to the cryptographic protocols. As a new design paradigm, physical layer security has been recognised as a promising solution to enhance the security of wireless links relying on the channel properties and advanced signal processing, and can act as either an alternative or a complementary solution to the conventional cryptographic methods. Without complicated secure key generation and management, physical layer security is quite suitable for the large scale distributed networks. In this thesis, we aim to improve the secrecy performance in emerging wireless communication systems relying on different physical layer security techniques. Firstly, the security of an amplify-and-forward successive relaying network with multiple untrusted relay nodes is investigated, where the conventional detrimental inter-relay interference is exploited to jam the untrusted nodes without assistance of external helpers. Considering different complexity requirements, several relay selection schemes are proposed, and the closed-form expressions of the lower bound of the secrecy outage probability and the maximum secrecy diversity order are derived accordingly. It is shown that the maximum secrecy diversity order of N-1 can be achieved for an N relay nodes network. Secondly, the artificial noise (AN) aided secure transmission strategy for a multiple-input single-output multiple-Eve (MISOME) system with a secure user (Bob) and a normal user (NU) is investigated. The power allocations among Bob, NU and AN, as well as the wiretap code rates, are jointly optimized to maximize the effective secrecy throughput (EST), under the average throughput constraint of NU. An alternative optimization algorithm with guaranteed convergence is proposed to obtain the optimal parameters. It is shown that the EST increases with the transmitting power and the number of transmit antennas, and decreases with the throughput constraint of NU, and the EST can be improved through injecting AN and concurrent transmission of Bob and NU. Thirdly, physical layer security in a multi-antenna small-cell network is investigated, where the multi-antenna base stations (BSs), cellular users, and Eves are all randomly distributed according to independent Poisson point processes. Stochastic geometry is applied to analyze the connection and secrecy outage probabilities and the average achievable secrecy rate. The impact of different parameters, including power allocation, BS and Eve density, and the adaptive eavesdropping or jamming on the secrecy performance is analyzed. It is shown that the average secrecy rate is a quasi-concave function of the power allocation factor and monotonically decreases with the ratio of the Eve-BS density. Finally, we study the physical layer security in a large-scale heterogeneous network consisting of both sub-6 GHz massive multi-input multi-output (MIMO) macro cells and millimeter wave (mmWave) small cells. By considering pilot spoofing attacks from the Eves, the coverage and secrecy probabilities are derived using stochastic geometry and the conditions under which the millimeter wave tier outperforms the sub-6 GHz counterpart are discussed in terms of both coverage and secrecy.It is shown that the mmWave small cell can provide better coverage performance in the high transmission code-rate region, and the secrecy performance of the mmWave system outperforms the sub-6 GHz counterpart in the low redundant rate region, which reveals the advantage of using mmWave for secure communication.