Physical layer security methods based on joint relay and jammer selection (JRJS) have been widely investigated in the study of secure wireless communications. Different from current works on JRJS schemes, which assumed that the global channel state information (CSI) of the eavesdroppers (Eves) was known beforehand, then the optimal relaying and jamming relays were determined. More importantly, the time complexity of selecting optimal jamming relay is O(N2), where N is the maximum number of relays/Eves. In this paper, for the scenario where the source wants to exchange the message with the destination, via relaying scheme due to longer communication distance and limited transmission power, in the presence of multiple Eves, with the assumption of Eves' perfect CSI and average CSI, we propose two kinds of JRJS methods. In particular, the time complexity of finding the optimal jammer can be reduced to O(N). Furthermore, we present a novel JRJS scheme for no CSI of Eves by minimizing the difference between expected signal and interfering signal at the destination. Finally, simulations show that the designed methods are more effective than JRJS and other existing strategies in terms of security performance.
Physical layer security methods based on joint relay and jammer selection (JRJS) have been widely investigated in the study of secure wireless communications. Different from current works on JRJS schemes, which assumed that the global channel state information (CSI) of the eavesdroppers (Eves) was known beforehand, then the optimal relaying and jamming relays were determined. More importantly, the time complexity of selecting optimal jamming relay is O(N2), where N is the maximum number of relays/Eves. In this paper, for the scenario where the source wants to exchange the message with the destination, via relaying scheme due to longer communication distance and limited transmission power, in the presence of multiple Eves, with the assumption of Eves' perfect CSI and average CSI, we propose two kinds of JRJS methods. In particular, the time complexity of finding the optimal jammer can be reduced to O(N). Furthermore, we present a novel JRJS scheme for no CSI of Eves by minimizing the difference between expected signal and interfering signal at the destination. Finally, simulations show that the designed methods are more effective than JRJS and other existing strategies in terms of security performance.
In this paper, we examine the physical layer security for cooperative wireless networks with multiple intermediate nodes, where the decode-and-forward protocol is considered. We propose a new joint relay and jammer selection (JRJS) scheme for protecting wireless communications against eavesdropping, where an intermediate node is selected as the relay for the sake of forwarding the source signal to the destination and meanwhile, the remaining intermediate nodes are employed to act as friendly jammers, which broadcast the artificial noise for disturbing the eavesdropper. We further investigate the power allocation among the source, relay and friendly jammers for maximizing the secrecy rate of proposed JRJS scheme, and derive a closed-form sub-optimal solution. Specifically, all the intermediate nodes, which successfully decode the source signal, are considered as relay candidates. For each candidate, we derive the sub-optimal closed-form power allocation solution and obtain the secrecy rate result of the corresponding JRJS scheme. Then, the candidate, which is capable of achieving the highest secrecy rate, is selected as the relay. Two assumptions about the channel state information (CSI), namely the full CSI (FCSI) and partial CSI (PCSI), are considered. Simulation results show that the proposed JRJS scheme outperforms the conventional pure relay selection, pure jamming, and generalized singular-value-decomposition-based beamforming schemes in terms of secrecy rate. Additionally, the proposed FCSI-based power allocation and PCSI-based power allocation schemes both achieve higher secrecy rates than the equal power allocation scheme.
This paper proposes a new joint cooperative beamforming and jamming (JCBJ) scheme for improving the physical layer security of decode-and-forward wireless networks where a source node transmits to its destination with the aid of multiple intermediate nodes in the presence of an eavesdropper. In the proposed JCBJ scheme, we select the intermediate nodes succeeding in source decoding as the relays to forward the source transmission simultaneously by employing a beamforming weight vector, and meanwhile, use the remaining ones as the friendly jammers to disturb the eavesdropper by sending artificial noise. In order to achieve the secrecy rate maximum, we further study on the power allocation among the source, relays, and jammers under two assumptions of the wiretap link's channel state information. We derive the closed-form optimal solutions by first allocating the transmit power at the source within different ranges to consider all the possible relay selection schemes in which different numbers of relays are employed, and then transforming the multivariable power allocation problem to a set of single-variable optimization subproblems. Our numerical results show the superiority of the proposed JCBJ scheme and the proposed power allocation strategies.
In this paper, we propose a new joint relay and jammer selection (JRJS) scheme to enhance the physical layer security for cooperative wireless networks with multiple intermediate nodes, where the decode-and-forward (DF) protocol is considered. In the proposed JRJS scheme, an intermediate node is selected as the relay for data transmission, while the others are used to act as friendly jammers for disrupting the eavesdropper by broadcasting artificial noise. We focus on the power allocation between the relay and jammers to maximize the secrecy rate of proposed JRJS scheme under a total transmit power constraint, and derive a closed-form optimal power allocation solution. For the purpose of comparision, the conventional pure relay selection and pure jammer selection schemes are considered as benchmark schemes. Simulation results show the advantage of the proposed JRJS scheme over conventional pure relay selection and pure jammer selection methods in terms of secrecy rate. Additionally, the derived optimal power allocation solution leads to a significantly higher secrecy rate than the equal power allocation scheme.
The broadcast nature of wireless communications makes the propagation medium vulnerable to security attacks such as eavesdropping and jamming from adversarial or unauthorized users. Applying physical layer secrecy approaches will enable the exchange of confidential messages over a wireless medium in the presence of unauthorized eavesdroppers, without using any secret keys. However, physical layer security approaches are typically feasible only when the source-eavesdropper channel is weaker than the source-destination channel. Cooperative jamming can be used to overcome this challenge and increase the secrecy rate. In this paper, the security of two-phase relaying system with multiple intermediate nodes and in the presence of an eavesdropper is investigated. To enhance the system secrecy rate, a joint cooperative beamforming and jamming combined with relay and jammer selections is proposed. In phase I, the source node broadcasts a signal to relays while three intermediate nodes (which act as jammers) help the source node by transmitting random jamming signals to confuse the eavesdropper. Since the friendly (cooperative) jammers create interference for both the intended relays and the eavesdropper, optimal beamforming is applied such that no interference is caused at two preselected desired relays (that are going to receive the confidential massage in phase I). In phase II, two preselected relays transmit the source message with beamforming coefficients such that the received signal at the eavesdropper is completely nulled out. Our goal in this paper is to minimize the received SNR at the eavesdropper while increasing it at the destination as much as possible by applying different methods such as cooperative beamforming, cooperative jamming and relay selection. To avoid operational complexity, we consider the minimum number of intermediate nodes that are necessary without losing the performance. Numerical results demonstrate the advantage of our proposed scheme compared with the scheme with no cooperative jamming.
A wireless network with one source, one destination, one eavesdropper, and multiple decode-and-forward relays is considered. A two-slot cooperative relaying scheme is proposed that targets at maximizing the secrecy rate. In the first slot, the source transmits the information bearing signal, and at the same time, it cooperates with the destination in jamming the eavesdropper without creating interference at the relay. In the second slot, one optimally selected relay retransmits the decoded source signal, and at the same time, that particular relay cooperates with the source to jam the eavesdropper without creating interference at the destination. Optimal relay selection and also optimal power allocation among the first/second slot data signal and jamming noise are proposed. It is shown that the secrecy rate of the proposed scheme scales with the total system powerP0and the number of available relaysKaccording to 1/2log2(1 +P0/8logK) - 1.6 bits/channel use . Although the proposed power allocation and relay selection assume global CSI available, the performance under imperfect relay CSI is also investigated. Also, the performance under distributed relay selection with limited feedback is demonstrated.
In this paper, the security of two-phase relaying system with multiple intermediate nodes in the presence of a malicious eavesdropper is investigated. To enhance the secrecy, a joint cooperative beamforming and jamming combined with relay and jammer selection is proposed. First, the source broadcasts its signal to the relays that are located close to source in a cluster, i.e., the source node uses a small amount of power to broadcast its message locally to other nodes of the cluster, while destination and the eavesdropper are located outside this cluster. In the second phase, two relays transmit re-encoded signal with optimal beamforming such that the secrecy rate is maximized. Simultaneously, two other intermediate nodes (which act as friendly jammers) transmit random jamming signals to degrade the eavesdropper’s channel. Our goal in this paper is to maximize the secrecy rate by applying different methods such as cooperative beamforming, cooperative jamming and relay and jammer selection. To avoid operational complexity, we consider the minimum number of intermediate nodes needed for relaying and jamming without losing the performance, i.e., achieving a non-zero secrecy rate. Cooperative beamforming with multiple relays demands high amount of information exchange and therefore increases the operational complexity. Thus, we aim to reduce the number of relays which take part in cooperative beamforming. Limiting the number of relays may have a bad effect on the coding gain which we compensate it with a proposed selection gain scheme. Numerical results demonstrate the advantage of our proposed scheme compared to the scheme with no cooperative jamming. The main contribution of this work is combining cooperative beamforming and jamming with relay and jammer selection to enhance the physical layer security.