Physical layer security (PLS) leverages physical characteristics of wireless channels to allow secure data transfer in wireless communications. While PLS has received considerable research, its practical implementation is still evolving. To address this gap, this work designs and implements a keyless PLS-based communication scheme using three USRP devices in an over-the-air environment in which a multi-antenna transmitter infuses an artificial Gaussian noise source to the nullspace of an intended receiver in order to obscure the received signal of an eavesdropper. The design is applicable to high-order quadrature amplitude modulation (QAM) constellations, which is suitable for high-spectral efficiency wireless communication systems. Our measurement results fully demonstrate the confidentiality achieved by the proposed PLS implementation.
Physical layer security (PLS) leverages physical characteristics of wireless channels to allow secure data transfer in wireless communications. While PLS has received considerable research, its practical implementation is still evolving. To address this gap, this work designs and implements a keyless PLS-based communication scheme using three USRP devices in an over-the-air environment in which a multi-antenna transmitter infuses an artificial Gaussian noise source to the nullspace of an intended receiver in order to obscure the received signal of an eavesdropper. The design is applicable to high-order quadrature amplitude modulation (QAM) constellations, which is suitable for high-spectral efficiency wireless communication systems. Our measurement results fully demonstrate the confidentiality achieved by the proposed PLS implementation.
Physical layer security (PLS) has emerged as a new concept and powerful alternative that can complement and may even replace encryption-based approaches, which entail many hurdles and practical problems for future wireless systems. The basic idea of PLS is to exploit the characteristics of the wireless channel and its impairments including noise, fading, interference, dispersion, diversity, etc. in order to ensure the ability of the intended user to successfully perform data decoding while preventing eavesdroppers from doing so. Thus, the main design goal of PLS is to increase the performance difference between the link of the legitimate receiver and that of the eavesdropper by using well-designed transmission schemes. In this survey, we propose a conceptual, generic, and expandable framework for classifying the existing PLS techniques against wireless passive eavesdropping. In this flexible framework, the security techniques that we comprehensively review in this treatise are divided into two primary approaches: signal-to-interference-plus-noise ratio-based approach and complexity-based approach. The first approach is classified into three major categories: first, secrecy channel codes-based schemes; second, security techniques based on channel adaptation; third, schemes based on injecting interfering artificial (noise/jamming) signals along with the transmitted information signals. The second approach (complexity-based), which is associated with the mechanisms of extracting secret sequences from the shared channel, is classified into two main categories based on which layer the secret sequence obtained by channel quantization is applied on. The techniques belonging to each one of these categories are divided and classified into three main signal domains: time, frequency and space. For each one of these domains, several examples are given and illustrated along with the review of the state-of-the-art security advances in each domain. Moreover, the advantages and disadvantages of each approach alongside the lessons learned from existing research works are stated and discussed. The recent applications of PLS techniques to different emerging communication systems such as visible light communication, body area network, power line communication, Internet of Things, smart grid, mm-Wave, cognitive radio, vehicular ad-hoc network, unmanned aerial vehicle, ultra-wideband, device-to-device, radio-frequency identification, index modulation, and 5G non-orthogonal multiple access based-systems, are also reviewed and discussed. The paper is concluded with recommendations and future research directions for designing robust, efficient and strong security methods for current and future wireless systems.
The open nature of radio propagation enables ubiquitous wireless communication. This allows for seamless data transmission. However, unauthorized users may pose a threat to the security of the data being transmitted to authorized users. This gives rise to network vulnerabilities such as hacking, eavesdropping, and jamming of the transmitted information. Physical layer security (PLS) has been identified as one of the promising security approaches to safeguard the transmission from eavesdroppers in a wireless network. It is an alternative to the computationally demanding and complex cryptographic algorithms and techniques. PLS has continually received exponential research interest owing to the possibility of exploiting the characteristics of the wireless channel. One of the main characteristics includes the random nature of the transmission channel. The aforesaid nature makes it possible for confidential and authentic signal transmission between the sender and the receiver in the physical layer. We start by introducing the basic theories of PLS, including the wiretap channel, information-theoretic security, and a brief discussion of the cryptography security technique. Furthermore, an overview of multiple-input multiple-output (MIMO) communication is provided. The main focus of our review is based on the existing key-less PLS optimization techniques, their limitations, and challenges. The paper also looks into the promising key research areas in addressing these shortfalls. Lastly, a comprehensive overview of some of the recent PLS research in 5G and 6G technologies of wireless communication networks is provided.
Physical layer security (PLS) has grown in popularity as it guarantees secure and reliable communication between wireless devices without restricting the ability of data analysts to eavesdrop. PLS benefits from the randomization property of the wireless channel, which improves immunity and protects against many dangers of information breaches from eavesdroppers. MIMO and Massive MIMO, which use numerous antennas at the transmitter and receiver ends, are fundamental technologies for improving efficiency in 5G and future network systems. The PLS still requires a significant amount of work before it can be employed in practical systems. The interception of eavesdroppers can be made difficult by adding artificial noise. This paper focuses on the physical layer security considering maximal ratio combining, and artificial noise with beamforming techniques to further enhance the secrecy rate. The proposed work demonstrates that the use of transmitter beamforming with artificial noise can significantly improve the degree of confidentiality of information being transmitted between a transmitter and an intended receiver while making it more difficult for eavesdroppers to intercept. The simulation results in terms of bit error rate show that the proposed method has a significant impact on the error rate performance of the eavesdropper.
This paper discusses the design of two Physical Layer Security (PLS) techniques in GNU Radio. PLS is a classification of security methods that take advantage of physical properties in the waveform or channel to secure communication. These schemes can be used to directly obfuscate the signal from eavesdroppers, or even generate secret keys for traditional encryption methods. Over the past decade, advancements in Multi Input Multi Output (MIMO) systems have expanded the potential capabilities of PLS while the development of technologies such as the Internet of Things (IoT) has provided new applications. As a result, this field has become heavily researched, but is still lacking implementation. The design work covered here attempts to alleviate this issue by providing a platform for Over-The-Air (OTA) experimentation.
5G network is expected to support massive user connections and exponentially increasing wireless services, which makes network security unprecedentedly important. Unlike traditional security-guaranteeing techniques which rely heavily on cryptographic approaches at upper layers of the protocol stack, physical-layer security (PLS) solutions fully take advantages of the characteristics of wireless channels to degrade the received signal qualities at the malicious users, and realize keyless secure transmission via signal design and signal processing techniques. PLS avoids the difficulties in the distribution and management of secret keys, and provides flexible security levels through adaptive transmission protocol design. Moreover, PLS techniques match the features of 5G networks well. Therefore, the application of PLS to 5G networks is a promising solution to address the security threats. This article presents a comprehensive review of the state-of-the-art PLS techniques, and discusses their applications in 5G networks. We first summarize the principle and advantages of PLS techniques, and point out the reasons why PLS is suitable for 5G networks. Then, we review the existing PLS methods in literature, and highlight several PLS solutions that are expected to be applied in 5G networks. Finally, we conclude this article and figure out some further research directions.
Massive Multiple-Input Multiple-Output (MIMO) has become a crucial enabling technology for 5G and beyond, providing previously unheard-of increases in energy and spectrum efficiency. It is still difficult to guarantee secure communication in these systems, particularly when it comes to passive eavesdroppers whose base station is unaware of their channel state information. By taking advantage of the inherent randomness of wireless channels, Physical Layer Security (PLS) offers a promising paradigm; however, its efficacy in massive MIMO is heavily reliant on resource allocation and transmission strategies. In this work, the performance of secure transmission schemes, such as Maximum Ratio Transmission (MRT), Zero-Forcing (ZF), and Artificial Noise (AN)-aided beamforming, is examined when passive eavesdroppers are present. This work will use extensive Monte Carlo simulations to assess important performance metrics such as energy efficiency, secrecy outage probability, and secrecy sum rate under different system parameters (e.g., number of antennas, Signal-to-Noise Ratio (SNR), power allocation). The results aim to provide comparative insight into the strengths and limitations of different PLS strategies and to highlight open research directions to design scalable, energy-efficient, and robust secure transmission techniques in future 6G networks.