Physical layer security (PLS) has grown in popularity as it guarantees secure and reliable communication between wireless devices without restricting the ability of data analysts to eavesdrop. PLS benefits from the randomization property of the wireless channel, which improves immunity and protects against many dangers of information breaches from eavesdroppers. MIMO and Massive MIMO, which use numerous antennas at the transmitter and receiver ends, are fundamental technologies for improving efficiency in 5G and future network systems. The PLS still requires a significant amount of work before it can be employed in practical systems. The interception of eavesdroppers can be made difficult by adding artificial noise. This paper focuses on the physical layer security considering maximal ratio combining, and artificial noise with beamforming techniques to further enhance the secrecy rate. The proposed work demonstrates that the use of transmitter beamforming with artificial noise can significantly improve the degree of confidentiality of information being transmitted between a transmitter and an intended receiver while making it more difficult for eavesdroppers to intercept. The simulation results in terms of bit error rate show that the proposed method has a significant impact on the error rate performance of the eavesdropper.
Physical layer security (PLS) has grown in popularity as it guarantees secure and reliable communication between wireless devices without restricting the ability of data analysts to eavesdrop. PLS benefits from the randomization property of the wireless channel, which improves immunity and protects against many dangers of information breaches from eavesdroppers. MIMO and Massive MIMO, which use numerous antennas at the transmitter and receiver ends, are fundamental technologies for improving efficiency in 5G and future network systems. The PLS still requires a significant amount of work before it can be employed in practical systems. The interception of eavesdroppers can be made difficult by adding artificial noise. This paper focuses on the physical layer security considering maximal ratio combining, and artificial noise with beamforming techniques to further enhance the secrecy rate. The proposed work demonstrates that the use of transmitter beamforming with artificial noise can significantly improve the degree of confidentiality of information being transmitted between a transmitter and an intended receiver while making it more difficult for eavesdroppers to intercept. The simulation results in terms of bit error rate show that the proposed method has a significant impact on the error rate performance of the eavesdropper.
Massive Multiple-Input Multiple-Output (MIMO) has become a crucial enabling technology for 5G and beyond, providing previously unheard-of increases in energy and spectrum efficiency. It is still difficult to guarantee secure communication in these systems, particularly when it comes to passive eavesdroppers whose base station is unaware of their channel state information. By taking advantage of the inherent randomness of wireless channels, Physical Layer Security (PLS) offers a promising paradigm; however, its efficacy in massive MIMO is heavily reliant on resource allocation and transmission strategies. In this work, the performance of secure transmission schemes, such as Maximum Ratio Transmission (MRT), Zero-Forcing (ZF), and Artificial Noise (AN)-aided beamforming, is examined when passive eavesdroppers are present. This work will use extensive Monte Carlo simulations to assess important performance metrics such as energy efficiency, secrecy outage probability, and secrecy sum rate under different system parameters (e.g., number of antennas, Signal-to-Noise Ratio (SNR), power allocation). The results aim to provide comparative insight into the strengths and limitations of different PLS strategies and to highlight open research directions to design scalable, energy-efficient, and robust secure transmission techniques in future 6G networks.
In the sixth-generation (6G) communications, how to deploy and manage massively connected Internet-of-Things (IoT) nodes will be one of the key technical challenges, because 6G is expected to provide 10 times higher connection, compared to 5G. At the same time, due to the sharp growth in connected devices and newly adopted technologies, learning-based attacks and big data breaches are expected to occur more frequently. With the advances of quantum computing in the future, conventional cryptography-based security protocols may be obsolete in the future wireless networks, which makes physical layer security (PLS) an attractive alternative or complement for secure communications. In this context, cooperative beamforming (CB)-based PLS schemes are known to be effective solutions to guarantee high secrecy rate with IoT devices, which have limited power and hardware complexity. However, the existing CB-based PLS algorithms suffer from extremely low secrecy rate, in case that eavesdroppers are close to the intended receiver. To overcome such critical issue, in this paper, we propose a CB-based PLS with artificial noise (AN) injection, which can be realized in a fully distributed manner to minimize the overhead in the IoT networks with a large number of devices. We analyze the array factor using the virtual antenna array (VAA) created by the proposed PLS algorithm. Then, the secrecy rate is derived in a closed-form expression, which can be used to optimize the performance for given system parameters in both the absence and presence of channel state information (CSI) error. The proposed scheme provides considerably higher secrecy rate compared to the conventional CB-based PLS schemes, when an eavesdropper exists near to the intended receiver. Furthermore, through simulation and numerical results, we show that the secrecy rate of the proposed scheme can be maximized by adjusting the ratio between the data beamformer and AN injection beamformer components. As a result, the proposed method shows a performance improvement of up to two times compared to the conventional CB-based PLS schemes, in terms of the secrecy rate. Such performance gain increases as the angular location of Eve becomes closer to that of Bob, which corresponds to the most vulnerable situation of the conventional CB-based PLS algorithms.
This paper investigates the physical layer security in wireless communication networks, focusing on the scenario where a base station sends confidential messages to a legitimate node while facing potential eavesdropping. The study assumes that the channel state information for both authorized and unauthorized nodes is not available. To assess both security and reliability, the paper introduces the use of bit error rate (BER) as a quantifiable security metric. The objective of the research is to evaluate the security performance improvement of the system through BER. Specifically, the impact of artificial noise (AN) power allocation ratio, and the number of transceiver antennas on BER performance is characterized. The numerical results demonstrate that artificial noise is effective against unknown passive eavesdropping attacks and leads to significant performance gains. For instance, by transmitting artificial noise power at approximately 50% of the total power to deliberately impair the eavesdropper’s reception, the BER gap between intended and unauthorized users can reach 0.4.
Traditional cryptographic encryption techniques at higher layers require a certain form of information sharing between the transmitter and the legitimate user to achieve security. Besides, it also assumes that the eavesdropper has an insufficient computational capability to decrypt the ciphertext without the shared information. However, traditional cryptographic encryption techniques may be insufficient or even not suit- able in wireless communication systems. Physical layer security (PLS) can enhance the security of wireless communications by leveraging the physical nature of wireless transmission. Thus, in this thesis, we study the PLS performance in emerging wireless transmission systems. The thesis consists of two main parts. We first consider the PLS design and analysis for ground-based networks em- ploying random unitary beamforming (RUB) scheme at the transmitter. With RUB technique, the transmitter serves multiple users with pre-designed beamforming vectors, selected using limited channel state information (CSI). We study multiple-input single-output single-eavesdropper (MISOSE) transmission system, multi-user multiple-input multiple-output single-eavesdropper (MU-MIMOSE) transmission system, and massive multiple-input multiple-output multiple-eavesdropper (massive MI- MOME) transmission system. The closed-form expressions of ergodic secrecy rate and the secrecy outage probability (SOP) for these transmission scenarios are derived. Besides, the effect of artificial noise (AN) on secrecy performance of RUB-based transmission is also investigated. Numerical results are presented to illustrate the trade-off between performance and complexity of the resulting PLS design. We then investigate the PLS design and analysis for unmanned aerial vehicle (UAV)-based networks. We first study the secrecy performance of UAV-assisted relaying transmission systems in the presence of a single ground eavesdropper. We derive the closed-form expressions of ergodic secrecy rate and intercept probability. When multiple aerial and ground eavesdroppers are located in the UAV-assisted relaying transmission system, directional beamforming technique is applied to enhance the secrecy performance. Assuming the most general κ-μ shadowed fading channel, the SOP performance is obtained in the closed-form expression. Exploiting the derived expressions, we investigate the impact of different parameters on secrecy performance. Besides, we utilize a deep learning approach in UAV-based network analysis. Numerical results show that our proposed deep learning approach can predict secrecy performance with high accuracy and short running time.
The use of physical layer methods for improving the security of wireless links has recently become the focus of a considerable research effort. Such methods can be used in combination with cryptography to enhance the exchange of confidential messages over a wireless medium in the presence of unauthorized eavesdroppers, or they can be used to enable secrecy in the absence of shared secret keys through the use of coding strategies, jamming or beamforming. Indeed, one of the driving forces behind the recent emergence of physical layer techniques for security is the push toward adding extra degrees of freedom in the form of multiple antennas at the transmitter and receiver of the link. Multiple-input multiple-output (MIMO) wireless systems have been extensively studied during the past two decades, and their potential gains in throughput, diversity, and range have been well quantified. MIMO approaches are now an integral part of the WiFi and 4G standards in use today. It is not surprising that MIMO architectures are useful in improving wireless security as well, since they can provide focused transmit selectivity of both information and noise toward desired and undesired receivers. In this chapter, we discuss a number of different ways that physical layer security can be achieved in wireless networks with MIMO links. We will focus primarily on signal processing related issues (e.g., beamforming, power control, resource allocation) that enable reliable reception at intended recipients and minimize data leakage to eavesdroppers, and we will consider a variety of different MIMO settings including point-to-point, broadcast, interference, and multi-hop networks. We cannot offer an exhaustive survey of such methods in just a single chapter; instead, we present a few representative approaches that illustrate ✐ ✐ — — ✐ ✐ ✐ ✐ ✐ ✐ Physical Layer Security in Wireless the gains that multiple antennas provide. Additional and more complete treatments of the physical layer security problem can be found in [1-4] as well as other chapters in this book.
This paper describes a new approach to the problem of interception of wireless communication channels between the legitimate users. Physical PHY Layer Security (PLS) is new topic enhancing the secrecy performance of a Multi-User Multiple-Input-Multiple-Output (MU-MIMO) system for wireless communication from a single base-station to many users. Beamforming techniques such as "Pre-Maximum Ratio Combining (P-MRC) and Pre-Equal Gain Combining (P-EGC)" with assumption of perfect Channel State Information CSI is considered in order to achieve the perfect secure transmission between legitimate users. Along with beamforming, Artificial Noise (AN) is a technology that is being studied. The plotted achievable worst-case of secrecy rate down to the best secrecy rate value (threshold of secrecy rate) versus the power allocation fractions (The power splitting factor). The achieved threshold of secrecy rates for the implemented MU-MIMO were used by Matched Filter (MF) beamforming schemes (P-MRC) and (P-EGC) and suggested that the (P-MRC) is considered as an optimal beamforming technique in order to achieve a best secrecy rate or best threshold of secrecy rate for a nearest Information User (IU) to the Eavesdropper Eve.