Quantum squaring circuits have been used as helpful arithmetic modules in various quantum algorithms for calculating series expansions or distances of vectors, etc. Quantum multipliers can replace quantum squaring circuits, but squaring with quantum multipliers is inefficient because it involves using quantum gates for unnecessary bitwise multiplication. In this paper, we propose a depth-optimized quantum circuit dedicated to squaring by eliminating these unnecessary quantum gates and implementing quantum gates in parallel. We also discuss the optimal distribution of the partial products to reduce further the gate cost of the quantum adder used for the sum of the partial products. The proposed partial product distribution method lowers the quantum adder’s number of gates and depth by half. Our quantum squaring circuit is the most efficient, with an average improvement of 68% and 79.7% in T-count and T-depth, respectively, compared to existing quantum squaring circuits. Despite the increased qubit counts caused by the depth optimization, we demonstrate that the proposed circuit has the smallest $$\hbox {KQ}_\textrm{T}$$ .
Quantum squaring circuits have been used as helpful arithmetic modules in various quantum algorithms for calculating series expansions or distances of vectors, etc. Quantum multipliers can replace quantum squaring circuits, but squaring with quantum multipliers is inefficient because it involves using quantum gates for unnecessary bitwise multiplication. In this paper, we propose a depth-optimized quantum circuit dedicated to squaring by eliminating these unnecessary quantum gates and implementing quantum gates in parallel. We also discuss the optimal distribution of the partial products to reduce further the gate cost of the quantum adder used for the sum of the partial products. The proposed partial product distribution method lowers the quantum adder’s number of gates and depth by half. Our quantum squaring circuit is the most efficient, with an average improvement of 68% and 79.7% in T-count and T-depth, respectively, compared to existing quantum squaring circuits. Despite the increased qubit counts caused by the depth optimization, we demonstrate that the proposed circuit has the smallest KQT .
In this study, we propose an efficient quantum multiplication approach based on a QFT-assisted parallelized addition scheme. The multiplication stage is implemented using a structure composed entirely of Toffoli gates, which generate partial products. In the second stage, these partial results are accumulated using a QFT-based adder. Unlike conventional QFT-based arithmetic circuits, the proposed design eliminates the repeated application of QFT and inverse QFT (IQFT) operations during intermediate summation processes. This leads to a significant reduction in the total gate count and circuit complexity, enabling a more resource-efficient implementation. To demonstrate the feasibility of the proposed approach, a quantum circuit that performs the multiplication of two 3-bit numbers is designed. The circuit is tested and validated using IBM quantum simulators. The results indicate that the proposed method provides a more efficient alternative to traditional quantum multiplication techniques in terms of gate cost and circuit depth.
We present a quantum algorithm for multiplying two n-bit integers with overall circuit depth and T-depth both bounded by O(logn), while using O(n2) gates and ancillary qubits. Our construction generates partial products via indicator-controlled copying and adds them using a tree of reversible 3-to-2 adders followed by one quantum carry-lookahead adder. Building on the carry-save adders of Kim et al., we combine full input fanout, workspace reuse, and phase-corrected gate implementations to reduce T-depth. We provide explicit circuit constructions, proofs of correctness, and concrete closed-form resource bounds.
Abstract Quantum circuits for multiplication and division are necessary for scientific computing on quantum computers. Clifford + T circuits are widely used in fault-tolerant realizations. T gates are more expensive than other gates in Clifford + T circuits. But neglecting the cost of CNOT gates may lead to a significant underestimation. Moreover, the small number of qubits available in existing quantum devices is another constraint on quantum circuits. As a result, reducing T-count, T-depth, CNOT-count, CNOT-depth, and circuit width has become the important optimization goal. We use 3-bit Hermitian gates to design basic arithmetic operations. Then, we present a special multiplier and a divider using basic arithmetic operations, where 'special' means that one of the two operands of multiplication is non-zero. Next, we use new rules to optimize the Clifford + T circuits of the special multiplier and divider in terms of T-count, T-depth, CNOT-count, CNOT-depth, and circuit width. Comparative analysis shows that the proposed multiplier and divider have lower T-count, T-depth, CNOT-count, and CNOT-depth than the current works. For instance, the proposed 32-bit divider achieves improvement ratios of 40.41 percent, 31.64 percent, 45.27 percent, and 65.93 percent in terms of T-count, T-depth, CNOT-count, and CNOT-depth compared to the best current work. Further, the circuit widths of the proposed n-bit multiplier and divider are 3n. I.e., our multiplier and divider reach the minimum width of multipliers and dividers, keeping an operand unchanged.
Quantum computing (Q-computing) is a revolutionary technology that applies quantum mechanics (QM) to implement calculations significantly quicker than traditional computers. Q-computing employs Q-bits (qubits) rather than classical bits, which can take on a superposition state, making it possible to represent both 0 and 1 at once. This distinctive property allows qubits to perform multiple calculations simultaneously, making Q computers exponentially more powerful as more qubits are added, compared to the linear scaling of classical computers. However, challenges such as qubit instability and error rates remain significant obstacles to fully realizing this potential. A vital aspect of this technology is the development of Q arithmetic circuits, which act as the foundational blocks for efficiently executing Q algorithms. Q half-adder and full-adder circuits are integral to performing fundamental arithmetic operations within Q computers. In contrast to classical adders, Q adders rely on Q gates such as Controlled NOT (CNOT) and Toffoli gates. These gates exploit Q phenomena like entanglement and superposition, allowing for more efficient computations. The Q half-adder consists of two qubits and adds two single bits, producing a carry and sum output. It utilizes the CNOT gate to compute the sum and the Toffoli gate (controlled-controlled-NOT [CCNOT]) to compute the carry. The Q full-adder builds on this, adding three qubits to produce a sum and a carry output, further increasing computational capacity. Through the entanglement of qubits, these circuits allow for more parallelism and speed compared to classical adders. Q carry-look-ahead adders (QCLAs) and Q ripple-carry adders (QRCAs) are used to perform more complex arithmetic operations based on these half-adder and full-adder structures. Q arithmetic circuits have broad applications, boosting secure key generation in cryptography, speeding up matrix operations for faster model training in machine learning, and enabling more precise, efficient image transformations in Q image processing, benefiting fields like medical imaging and computer vision.
Quantum circuits performing arithmetic operations are critical in quantum computing because of the need for such operations in proven quantum algorithms. Although quantum computers are becoming increasingly resourceful, the number of qubits currently available is still limited. Furthermore, these qubits are heavily affected by internal and external noise. It has been proven that quantum circuits built using Clifford +T gates can be made fault tolerant. However, the use of the T gates comes at a very high cost. If the number of T gates used in a circuit is not optimized, the cost of the circuit will be increased excessively. As a consequence, it is essential to optimize the circuits so that they are as resource efficient as possible and also noise tolerant. This paper presents the design of a circuit to perform the multiplication of two integers. The circuit is built using only Clifford +T gates for compatibility with error detection and correction codes. It outperforms the circuits in the state of the art in terms of T count and T depth.
We present quantum circuits for comparison and increment operations that achieve an asymptotically optimal gate count of Θ(n) and depth of Θ(logn) over the Clifford+Toffoli gate set, while using a provably minimal number of qubits. We extend these results to classical-quantum comparators, yielding an improved classical-quantum adder with an optimal qubit count. Given the ubiquity of these operations as algorithmic building blocks, our constructions translate directly into reduced circuit complexity for many quantum algorithms. As a notable example, they can be used to improve a space-efficient circuit for Shor's factoring algorithm, reducing circuit depth from O(n3) to O(n2log2n) without increasing either the qubit count or the asymptotic gate complexity. Underpinning these results is a general theorem demonstrating how to trade ancilla qubits for control qubits with low overhead in both depth and gate count, providing a broadly applicable tool for quantum circuit design.