Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Ultrasonics, Ferroelectrics, and Frequency Control Joint Symposium (UFFC-JS)

A Compact Rubidium Optical Clock Based on Modulation Transfer Spectrum

Zhendong Chen, Ruoao Yang, Yang Qiaohui, Tianyu Liu, Ya Wang, Jie Miao, Duo Pan, Jianjun Wu, Zhigang Zhang, Jingbiao Chen

Published Sep 22, 2024• 0 citations
Publisher

Abstract

A compact rubidium optical clock is presented, incorporating an optical frequency standard, a fiber frequency comb, and associated control electronics. Modulation transfer spectroscopy, devoid of Doppler background and characterized by a high signal-to-noise ratio and sensitivity, is employed to lock the laser frequency to the hyperfine transitions of rubidium atomic lines. The clock exhibits a short-term stability of 4.10 × 10-13at a 1-second gate time, and the stability remains below 7.27 × 10-13up to 1000 seconds. These results offer a promising alternative approach for the development of portable optical clocks.

DOI
10.1109/uffc-js60046.2024.10793971

Related papers

Compact 780-nm Rb optical clock

Zhendong Chen, Tianyu Liu, Ruoao Yang +9 more

We demonstrated a compact 780 nm rubidium optical clock, which includes an optical frequency standard and an optical frequency comb, with an optical volume of 11.6 liters. Unlike the 778 nm rubidium atomic clocks based on two-photon transition, here, the laser frequency is stabilized to the Rb D2 transition, using modulation transfer spectroscopy. This approach effectively eliminates Doppler background and provides a high signal to noise ratio and high sensitivity. A nearly 300 MHz microwave signal, whose phase exactly tracks that of the optical frequency standard, is generated via the optical frequency comb, yielding a frequency instability of 1.91 E-13 @1 s and 5.29 E-14 @1000 s in the electronic domain. To the best of our knowledge, this is the most precise frequency stabilization result for the first-excited-state transition of alkali metal atoms to date and represents the first optical clock based on this transition. These results offer a promising approach for the development of portable optical clocks.

arXiv:2501.01826•Physical Review Applied•Nov 24, 2025•4 citations

Compact optical frequency standard based on a miniature cell using modulation transfer spectroscopy

Jiqing Lian, Qiaohui Yang, Tianyu Liu +8 more

This study investigates the application of miniature quantum references within small-scale optical atomic frequency standards, utilizing a diminutive 87 Rb glass cell, dimensions of 6 mm × 6 mm × 6 mm, to establish a quantum frequency standard.By employing the transition spectrum from 5 2 S 1/2 F = 2 to 5 2 P 3/2 F 0 =3, this study successfully demonstrates the development of a compact rubidium atomic optical frequency standard via modulation transfer spectroscopy (MTS).Subsequent to frequency stabilization, the 780 nm clock laser exhibits a linewidth of 6.9 kHz, and its out-of-loop short-term stability reaches 4.1 × 10 -13 @ 1 s, as confirmed through beat frequency analysis.This research not only provides a practical blueprint for the development of small optical atomic frequency standards but also lays down essential groundwork for future advancements in chip-level optical frequency standard technologies.

Chinese Optics Letters•Jan 1, 2025•2 citations

Compact Optical Frequency Standard with MEMS Vapor Cells

Qiaohui Yang, Zhenyu Hu, Tianyu Liu +7 more

This work introduces an innovative optical frequency standard that leverages MEMS vapor cells to achieve exceptional stability. To attain these objectives, we have integrated the modulation transfer spectroscopy (MTS) technique, which not only ensures high stability but also contributes to minimal power consumption in a compact form factor. Employing MTS with a high signal-to-noise ratio and utilizing a full bandwidth, high-speed servo feedback, we have successfully stabilized the laser frequency at the hyperfine transitions of rubidium atomic lines within the MEMS vapor cell. Furthermore, after the laser is locked, there is a significant narrowing effect on the laser linewidth. The current specifications of our compact optical frequency standard include a frequency Allan deviation of 4.8E-13@1s and the laser linewidth of only 18 kHz.

European Frequency and Time Forum•Jun 25, 2024•0 citations

Compact Optical Atomic Clock Based on a Two-Photon Transition in Rubidium

Kyle W. Martin, Gretchen R. Phelps, N. Lemke +7 more

Optical frequency standards surpass their microwave counterparts in both stability and accuracy, yet they are often bulky, power-hungry, and unable to operate outside of a well-controlled laboratory environment. Leveraging a two-photon transition in ${}^{87}$Rb vapor and recent advances in fiber frequency combs, the authors build an optical clock to beat the current portable standards, with an architecture that can be made compact and low-power. These results point the way to a real-world optical frequency standard of even higher stability, for applications such as satellite navigation.

arXiv:1903.11231•Physical Review Applied•Jan 18, 2018•171 citations

Compact two-photon optical clock with a long-term stability of 8.1 × 10−15 without linear drift removal

Chen Feng, Xinrui Luo, Ji’an Duan +5 more

In this work, we stabilize a 1556.2 nm fiber laser to the 5S1/2 → 5D5/2 two-photon transition in 87Rb in a carefully designed compact physics package. A commercial fiber frequency comb divides the optical frequency into 200 MHz microwave output, which demonstrates a fractional frequency stability of 2.2 × 10-13 at τ = 1 s and 8.1 × 10-15 at τ = 4000 s, without linear drift removal. We analyze the systematic effect on the short-term and long-term stabilities in detail. The short-term and long-term stabilities are limited by shot noise and ac Stark shift, respectively. The rubidium two-photon optical clock is a promising candidate for the next-generation space-borne atomic clock.

Review of Scientific Instruments•Dec 1, 2025•3 citations

Chip-scale Optical Clock Based on Modulation Transfer Spectroscopy

Qiaohui Yang, Tianyu Liu, Jie Miao +2 more

SummaryWe propose a scheme for realizing a chip-scale optical clock based on modulation transfer spectroscopy. By using on-chip laser, lithium niobate thin film waveguides and MEMS cells, the laser frequency can be stabilized at the hyperfine transition of rubidium atomic line. In this way, the volume and power consumption of the optical clock can be greatly reduced while the performance is guaranteed.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•May 15, 2023•0 citations
A compact rubidium optical clock is presented, incorporating an optical frequency standard, a fiber frequency comb, and associated control electronics. Modulation transfer spectroscopy, devoid of Doppler background and characterized by a high signal-to-noise ratio and sensitivity, is employed to lock the laser frequency to the hyperfine transitions of rubidium atomic lines. The clock exhibits a short-term stability of 4.10 × 10-13at a 1-second gate time, and the stability remains below 7.27 × 10-13up to 1000 seconds. These results offer a promising alternative approach for the development of portable optical clocks.
We demonstrated a compact 780 nm rubidium optical clock, which includes an optical frequency standard and an optical frequency comb, with an optical volume of 11.6 liters. Unlike the 778 nm rubidium atomic clocks based on two-photon transition, here, the laser frequency is stabilized to the Rb D2 transition, using modulation transfer spectroscopy. This approach effectively eliminates Doppler background and provides a high signal to noise ratio and high sensitivity. A nearly 300 MHz microwave signal, whose phase exactly tracks that of the optical frequency standard, is generated via the optical frequency comb, yielding a frequency instability of 1.91 E-13 @1 s and 5.29 E-14 @1000 s in the electronic domain. To the best of our knowledge, this is the most precise frequency stabilization result for the first-excited-state transition of alkali metal atoms to date and represents the first optical clock based on this transition. These results offer a promising approach for the development of portable optical clocks.
This study investigates the application of miniature quantum references within small-scale optical atomic frequency standards, utilizing a diminutive 87 Rb glass cell, dimensions of 6 mm × 6 mm × 6 mm, to establish a quantum frequency standard.By employing the transition spectrum from 5 2 S 1/2 F = 2 to 5 2 P 3/2 F 0 =3, this study successfully demonstrates the development of a compact rubidium atomic optical frequency standard via modulation transfer spectroscopy (MTS).Subsequent to frequency stabilization, the 780 nm clock laser exhibits a linewidth of 6.9 kHz, and its out-of-loop short-term stability reaches 4.1 × 10 -13 @ 1 s, as confirmed through beat frequency analysis.This research not only provides a practical blueprint for the development of small optical atomic frequency standards but also lays down essential groundwork for future advancements in chip-level optical frequency standard technologies.
This work introduces an innovative optical frequency standard that leverages MEMS vapor cells to achieve exceptional stability. To attain these objectives, we have integrated the modulation transfer spectroscopy (MTS) technique, which not only ensures high stability but also contributes to minimal power consumption in a compact form factor. Employing MTS with a high signal-to-noise ratio and utilizing a full bandwidth, high-speed servo feedback, we have successfully stabilized the laser frequency at the hyperfine transitions of rubidium atomic lines within the MEMS vapor cell. Furthermore, after the laser is locked, there is a significant narrowing effect on the laser linewidth. The current specifications of our compact optical frequency standard include a frequency Allan deviation of 4.8E-13@1s and the laser linewidth of only 18 kHz.
Optical frequency standards surpass their microwave counterparts in both stability and accuracy, yet they are often bulky, power-hungry, and unable to operate outside of a well-controlled laboratory environment. Leveraging a two-photon transition in 87{}^{87}87Rb vapor and recent advances in fiber frequency combs, the authors build an optical clock to beat the current portable standards, with an architecture that can be made compact and low-power. These results point the way to a real-world optical frequency standard of even higher stability, for applications such as satellite navigation.
In this work, we stabilize a 1556.2 nm fiber laser to the 5S1/2 → 5D5/2 two-photon transition in 87Rb in a carefully designed compact physics package. A commercial fiber frequency comb divides the optical frequency into 200 MHz microwave output, which demonstrates a fractional frequency stability of 2.2 × 10-13 at τ = 1 s and 8.1 × 10-15 at τ = 4000 s, without linear drift removal. We analyze the systematic effect on the short-term and long-term stabilities in detail. The short-term and long-term stabilities are limited by shot noise and ac Stark shift, respectively. The rubidium two-photon optical clock is a promising candidate for the next-generation space-borne atomic clock.