The SpinBus architecture for scaling spin qubits with electron shuttling
Matthias Künne, Alexander Willmes, Max Oberländer, Christian Gorjaew, Julian D. Teske, Harsh Bhardwaj, Max Beer, Eugen Kammerloher, René Otten, Inga Seidler, Ran Xue, Lars R. Schreiber, Hendrik Bluhm
Quantum processor architectures must enable scaling to large qubit numbers while providing two-dimensional qubit connectivity and exquisite operation fidelities. For microwave-controlled semiconductor spin qubits, dense arrays have made considerable progress, but are still limited in size by wiring fan-out and exhibit significant crosstalk between qubits. To overcome these limitations, we introduce the SpinBus architecture, which uses electron shuttling to connect qubits and features low operating frequencies and enhanced qubit coherence. Device simulations for all relevant operations in the Si/SiGe platform validate the feasibility with established semiconductor patterning technology and operation fidelities exceeding 99.9%. Control using room temperature instruments can plausibly support at least 144 qubits, but much larger numbers are conceivable with cryogenic control circuits. Building on the theoretical feasibility of high-fidelity spin-coherent electron shuttling as key enabling factor, the SpinBus architecture may be the basis for a spin-based quantum processor that meets the scalability requirements for practical quantum computing.
Quantum processor architectures must enable scaling to large qubit numbers while providing two-dimensional qubit connectivity and exquisite operation fidelities. For microwave-controlled semiconductor spin qubits, dense arrays have made considerable progress, but are still limited in size by wiring fan-out and exhibit significant crosstalk between qubits. To overcome these limitations, we introduce the SpinBus architecture, which uses electron shuttling to connect qubits and features low operating frequencies and enhanced qubit coherence. Device simulations for all relevant operations in the Si/SiGe platform validate the feasibility with established semiconductor patterning technology and operation fidelities exceeding 99.9%. Control using room temperature instruments can plausibly support at least 144 qubits, but much larger numbers are conceivable with cryogenic control circuits. Building on the theoretical feasibility of high-fidelity spin-coherent electron shuttling as key enabling factor, the SpinBus architecture may be the basis for a spin-based quantum processor that meets the scalability requirements for practical quantum computing.
Quantum processor architectures must enable scaling to large qubit numbers while providing two-dimensional qubit connectivity and exquisite operation fidelities. For microwave-controlled semiconductor spin qubits, dense arrays have made considerable progress, but are still limited in size by wiring fan-out and exhibit significant crosstalk between qubits. To overcome these limitations, we introduce the SpinBus architecture, which uses electron shuttling to connect qubits and features low operating frequencies and enhanced qubit coherence. Device simulations for all relevant operations in the Si/SiGe platform validate the feasibility with established semiconductor patterning technology and operation fidelities exceeding 99.9 %. Control using room temperature instruments can plausibly support at least 144 qubits, but much larger numbers are conceivable with cryogenic control circuits. Building on the theoretical feasibility of high-fidelity spin-coherent electron shuttling as key enabling factor, the SpinBus architecture may be the basis for a spin-based quantum processor that meets the scalability requirements for practical quantum computing.
Universal quantum computing promises solutions to a wide range of problems of significant scientific and socioeconomic impact that are computationally intractable using classical hardware. Since physical qubits are inherently noisy and prone to decoherence, realizing a sufficient number of logical qubits to unlock practically relevant problem classes will likely require quantum error correction, resulting in an overhead of millions of physical qubits. Among all competing hardware platforms, spin qubits in gate-defined quantum dots are uniquely positioned: single- and two-qubit gate fidelities routinely exceed the error-correction threshold, and the experimentally proven compatibility with industrial-grade semiconductor manufacturing may enable millions of qubits on a single chip. Realizing this potential, however, requires quantum processor architectures that scale to large qubit numbers with two‑dimensional connectivity while maintaining high operational fidelities. Building on the theoretical feasibility of high‑fidelity spin‑coherent electron shuttling, the SpinBus architecture is introduced to enable scaling to application-relevant qubit numbers. The SpinBus architecture leverages the conveyor-mode shuttling device named Quantum Bus (QuBus) for coherent qubit coupling over micron‑scale distances to accommodate, at the level of the quantum processor chip, wiring fan‑out and locally integrated control electronics at cryogenic temperatures. Device simulations for all relevant operations in the Si/SiGe platform validate operation fidelities exceeding 99 % as well as compatibility with the requirements of established semiconductor patterning technology. Control with room‑temperature electronics plausibly supports at least 144 qubits, while substantially larger quantum processor sizes are conceivable using cryogenic control electronics. For the experimental realization of QuBus devices, a novel high‑yield multilayer electron-beam lithography process, which can readily be adapted to different device layouts, was developed to fabricate the required > 100 aligned metallic gate electrodes. Benchmarking with a semiconductor industry‑inspired methodology and inspection of > 100 devices demonstrated 99 % gate fabrication yield and at least 5 nm overlay accuracy. Utilizing GaAs/(Al,Ga)As QuBus prototype devices with a 7 µm shuttling channel for quantized-current experiments validated key criteria for conveyor-mode shuttling, in particular linear current scaling for operation frequencies up to 40 MHz, and provided preliminary evidence consistent with quantized conveyor-mode electron transfer. These results support the viability of conveyor-mode shuttling for qubit coupling and indicate the suitability of QuBus devices for metrological applications.
For the realization of a quantum computer, a good qubit design as the basic building block is a nontrivial starting point. To fully leverage the potential of quantum computing, quantum processors will likely have to incorporate billions of high-quality qubits. Several approaches are being pursued and exhibit different strength and weaknesses. The device concepts and fabrication procedures for semiconductor based qubits are very similar to those used in the semiconductor industry. Using the spin-degree of freedom, their coherence properties and the quality of single-qubit operations have now reached the required level and are on par with competing approaches. Two-qubit operations will likely follow suit in the near future. With these basic requirements being met, it is now time to think if and how increasingly large multi-qubit systems and eventually functional quantum processor can be realized. This quest raises many pertinent questions, some of which equally apply to other qubit platforms. How reproducibly can the different types of semiconductor qubits be produced? How can their operating point be adjusted efficiently and in an automated way? How can they be connected to form meaningful multi-qubit circuits? How severe are multi-qubit control issues such as crosstalk and frequency crowding, and how can they be avoided? What control system architectures are most suitable for operating large numbers of qubits? What is the limit of cryogenic electronics regarding power consumption and integration density? This paper gives a (partial) overview of the state of the art in the field and discusses future challenges associated with the realization of large-scale quantum processors, many of which will greatly benefit from input from engineering science. The guiding vision is that of a highly integrated quantum processor with an ultra-low power cryogenic control system.
Quantum computers have gained widespread interest as they can potentially solve problems that are intractable even for today’s supercomputers, such as the simulation of quantum systems as initially proposed by Feynman. To achieve such tremendous progress, a quantum computer relies on processing the information stored in quantum bits (qubits), the fundamental units of quantum computation, similar to the bits in a classical (i.e., non-quantum) processor. In general, a quantum processor comprising several qubits is connected through a quantum-to-classical interface consisting of classical electrical circuits for manipulating and reading out their quantum state. The accuracy of an operation on a qubit is characterized using the fidelity, which is 100 % in case of a perfect operation. In practice, a fidelity between 99 % and 99.9 % is typically achieved in today’s experiments with less than 100 qubits, limited by non-idealities in the control signals and by the implementation of the physical qubit itself. Since such qubit fidelities are too low to execute relevant quantum algorithms, quantum error correction schemes have been developed which rely on a much larger number of qubits to correct for possible errors, resulting in the need for quantum processors with thousands or millions of qubits. Solid-state qubits promise the largescale integration required to scale to millions of qubits, as they exploit the lithographic fabrication techniques borrowed from the semiconductor industry. However, state-of-theart solid-state qubits, such as transmons and single-electron spin qubits, must be typically cooled to cryogenic temperatures in a dilution refrigerator to exhibit quantum behavior. Because of the limited number of qubits (< 100) in state-of-theart solid-state quantum processors, the classical controller is currently implemented by general-purpose instruments or by tailor-made controllers operating at room temperature connected via several wires to the qubits in the cryogenic chamber. However, these systems must scale to support millions of qubits. While scaling up the underlying quantum processor is already exceptionally challenging, building the electronics required to interface such a large-scale processor is just as relevant and arduous.
Future universal quantum computers solving problems of practical relevance are expected to require at least 106 qubits, which is a massive scale-up from the present numbers of less than 50 qubits operated together. Out of the different types of qubits, solid state qubits are considered to be viable candidates for this scale-up, but interfacing to and controlling such a large number of qubits is a complex challenge that has not been solved yet. One possibility to address this challenge is to use qubit control circuits located close to the qubits at cryogenic temperatures. In this work we evaluate the feasibility of this idea, taking as a reference the physical requirements of a two-electron spin qubit and the specifications of a standard 65 nm complementary metal-oxide-semiconductor (CMOS) process. Using principles and flows from electrical systems engineering we provide realistic estimates of the footprint and of the power consumption of a complete control-circuit architecture. Our results show that with further research it is possible to provide scalable electrical control in the vicinity of the qubit, with our concept.
Quantum computing holds the promise to solve problems that are currently intractable by classical computing platforms. Such computing framework relies on the properties of quantum bits (qubits) that operates at cryogenic temperatures well below 1K. Besides a quantum processor, an operational quantum computer needs a classical electronic controller reading out the electrical signals generated by the qubits and the providing electrical control to perform the required operations on the qubits. Since today’s quantum processors comprise a low number of qubits (<10), most controlling electronics can operate at room temperature and be connected by bulky interconnects to the cryogenic qubit chamber. However, when scaling up to the thousands of qubits required in a practical quantum algorithm, the classical electronics must be placed at cryogenic temperature to simplify the interconnects and allow a compact, reliable and scalable system. In this work, we propose the fully-integrated implementation in standard CMOS technology of the electronic read-out for spin qubits. Simulations show that the proposed current read-out circuit can achieve a 10MHz bandwidth that is 10X wider than current state-of-the-art read-outs while keeping comparable noise performance and operating at 4.2K. Such results are a promising indication that cryogenic CMOS circuits can provide the building blocks for the integration of the classical electronic controller for future scalable quantum computers.