Quantum computing holds the promise to solve problems that are currently intractable by classical computing platforms. Such computing framework relies on the properties of quantum bits (qubits) that operates at cryogenic temperatures well below 1K. Besides a quantum processor, an operational quantum computer needs a classical electronic controller reading out the electrical signals generated by the qubits and the providing electrical control to perform the required operations on the qubits. Since today’s quantum processors comprise a low number of qubits (<10), most controlling electronics can operate at room temperature and be connected by bulky interconnects to the cryogenic qubit chamber. However, when scaling up to the thousands of qubits required in a practical quantum algorithm, the classical electronics must be placed at cryogenic temperature to simplify the interconnects and allow a compact, reliable and scalable system. In this work, we propose the fully-integrated implementation in standard CMOS technology of the electronic read-out for spin qubits. Simulations show that the proposed current read-out circuit can achieve a 10MHz bandwidth that is 10X wider than current state-of-the-art read-outs while keeping comparable noise performance and operating at 4.2K. Such results are a promising indication that cryogenic CMOS circuits can provide the building blocks for the integration of the classical electronic controller for future scalable quantum computers.
Quantum computing holds the promise to solve problems that are currently intractable by classical computing platforms. Such computing framework relies on the properties of quantum bits (qubits) that operates at cryogenic temperatures well below 1K. Besides a quantum processor, an operational quantum computer needs a classical electronic controller reading out the electrical signals generated by the qubits and the providing electrical control to perform the required operations on the qubits. Since today’s quantum processors comprise a low number of qubits (<10), most controlling electronics can operate at room temperature and be connected by bulky interconnects to the cryogenic qubit chamber. However, when scaling up to the thousands of qubits required in a practical quantum algorithm, the classical electronics must be placed at cryogenic temperature to simplify the interconnects and allow a compact, reliable and scalable system. In this work, we propose the fully-integrated implementation in standard CMOS technology of the electronic read-out for spin qubits. Simulations show that the proposed current read-out circuit can achieve a 10MHz bandwidth that is 10X wider than current state-of-the-art read-outs while keeping comparable noise performance and operating at 4.2K. Such results are a promising indication that cryogenic CMOS circuits can provide the building blocks for the integration of the classical electronic controller for future scalable quantum computers.
Quantum computers hold a promise to solve intractable problems that can not be solved with classical computers. In quantum computers, information is processed in qubits as opposed to bits. The proper operation of qubits requires them to be operated in a quantum state; hence they need to be cooled down to temperatures well below l1K. Using qubits and their quantum mechanical property, quantum computers can achieve exponential speedup in solving certain computing problems compared to classical computers. However, this can only be achieved by employing thousands of qubits. At the current state of play, quantum computers are still far from practical. The current state-of-the-art solution dictates that each qubit needs multiple interconnects towards room temperature and requires bulky room temperature instruments for qubit readout and control. Clearly, this current solution will not scale well for a quantum computer with many qubits. In an effort to solve this issue, it has been proposed to realize dedicated integrated circuits for control and readout of the qubits and operate them closer to the qubits' operating temperature to enable scalability. The thesis presents the implementation of an integrated RF receiver for spin and superconducting qubit readout applications. The work aims to replace the bulky room temperature electronics with an integrated solution that operates at 4K to enable scalability and simplification of the quantum computing architecture. The receiver has been designed in the TSMC 40nm CMOS technology and has been characterized in room temperature and 4K. The measured performance shows that the receiver features a gain of 58 dB and a minimum double-sideband noise figure of 0.6 dB at 4K with an operating frequency of 6-8 GHz; a comparable performance to the current state-of-the-art room temperature electronics used for qubit readout. Moreover, this work demonstrates a qubit readout experiment with the integrated receiver in both room temperature and 4K. The qubit readout experiment shows a comparable qubit readout performance with the integrated receiver at room temperature. However, due to oscillation problems, a degradation in qubit readout performance with the chip operating at 4K is observed.
Quantum computing promises to revolutionize our lives, achieving unprecedented computational powers and unlocking new possibilities in drug discovery, chemical simulations and cryptography. The fundamental unit of computation of a quantum computer is the quantum bit (qubit). It can be implemented in a number of technologies, such as superconducting qubits, spin qubits, photonic systems, trapped ions and NV-centers. Solid-state superconducting qubits and spin qubits seem to be the most promising ones, as shown by the recent demonstration of quantum supremacy with a superconducting qubit processor. Such quantum processors, to operate in the quantum regime, require very low temperatures around 10 mK, and they are hence kept inside dilution fridges. The electronics required to read out and control such processors is typically realized by discrete components or bulky scientific instruments at room temperature wired into the dilution fridge. Such approach is only feasible until few (< 100) qubits are handled, but it is not scalable for million-qubit processors required for fault-tolerant operation. In this thesis, readout and control electronics is proposed to be integrated and operated directly at cryogenic temperatures, in close proximity with the qubits and potentially even co-integrated. CMOS technology is advocated for its scalability, compactness and low prototyping cost, to create a comprehensive cryo-CMOS class of fully-integrated transceivers to read out and control solid-state qubits. In particular, the thesis focuses on cryo-CMOS radio-frequency integrated circuits for the readout of silicon quantum computers, looking to integrate the whole readout system, from the quantum layer to the room temperature user interface. Cryogenic CMOS devices are explored first, to lay the foundations of integrated circuit design. The realization of quantum dots in standard CMOS technology is explored as a platform to realize solid-state qubit arrays, demonstrating functionality at 50 mK and good reproducibility. Moreover, the operation of integrated transistors at 50 mK and 4.2 K is explored to understand their basic cryogenic functionality, through characterization and modeling. Then also integrated passives, such as capacitors, inductors and transformers, are studied and modeled at cryogenic temperatures. Then, a fully-integrated readout platform spanning across all the blocks needed for dispersive readout is proposed. A fully-integrated matrix of quantum dots with radio-frequency gate-based readout capabilities is demonstrated along with time- and frequency-multiplexing. This quantum-classical circuit shows all the features for a scalable approach and is the core of the platform following it. A cryogenic CMOS circulator based on a new all-pass filter architecture is demonstrated, to be used as integrated replacement for current bulky counterparts; it allows power reduction, insertion loss and bandwidth enhancement with respect to state-of-the-art integrated circulators. The rest of the front-end is also explored with dedicated test multiplexers, a low noise-amplifier and an oscillator, that are finally merged in a single fully-integrated low-noise receiver with frequency synthesizer operating at 3.5 K for scalable multiplexed readout of silicon qubits. The platform presented in this thesis, across temperature boundaries, carries all the features required for future scalable silicon quantum computing platforms and could therefore form their core.
Quantum computing promises an exponential speed-up of computation compared to what is nowadays achievable with classical computers. In this way, it enables the evaluation of more complex models and the breaching of current security algorithms. For the operation of a quantum system, many questions remain to be answered. Currently, there are several quantum technologies that promise to be both reliable and scalable, two features required for large scale quantum operations. Common to all technologies is the operating temperature that needs to be close to absolute zero, i.e. below 100 mK, to suppress environment noise and allow the quantum properties to become 'visible'. In order for any quantum processor to be operated, a so-called quantum-classical interface is required for the quantum bit (qubit) read-out and control. This interface consists of various electronic blocks, such as analog-to-digital converters, digital-to-analog converters, mixers, amplifiers and a digital controller. Especially the analog blocks require effort to meet the noise and stability constraints as not to disturb the very sensitive qubits and allow reading of the tiny signals. As the qubits live in extremely deep-cryogenic temperatures, long wires interface the cryogenic with the room temperature environment, where most of the electronics is situated. However, for a scalable system, heat injection becomes a serious problem, with many wires between 300 K and sub-Kelvin. Furthermore, such amount of interconnects is challenging to mechanically place in a dilution refrigerator. Therefore, in this work, we propose to implement the electronics not at room temperature, but at a temperature much closer to the qubits, for example at 4 K. This not only reduces significantly the wiring between room temperature and the qubits, but we can also benefit from lower electronic noise at such a temperature. The operation of conventional electronics almost 200°C below its normal temperature range is not trivial as device properties alter significantly and most circuits no longer operate as intended. In CMOS processes, the main technology in the integrated electronics world, the behaviour of the transistors, required for the implementation of any circuit, deviates considerably at low temperatures. The transistor's threshold voltage goes up, the mobility increases and the subthreshold slope becomes steeper, to name just a few of these deviations. Although there are improvements in performance, there are also some counter effects, and characterization of the transistors is needed to observe the changes. Once devices are characterized at such low temperatures, new models can be built and circuits can be simulated and adapted to operate properly at cryogenic temperatures. Luckily, there are various commercially available devices that can already withstand the chills of cold. We demonstrated various commercially available devices, such as a field-programmable gate array (FPGA) implemented in a 28 nm CMOS process, to be operating without major concerns at 4~K. Its properties alter only slightly, within 5 to 10%, and all tested circuit implementations, working at 300~K, also worked at 4 K. We combined both commercially available devices, that operate 200 K below their specified temperature range, with custom designed CMOS circuits to implement a cryogenic read-out platform for spin qubits. This system comprises amplifiers, an ADC, an FPGA, voltage regulators and a clock generator. It allows to amplify the tiny signal from the qubits and digitize it directly in the FPGA in order to process the data locally at 4~K. This system is one of the first systematic attempts at operating a part of the quantum-classical interface at cryogenic temperatures and forms the basis for future systems comprising the complete electronic interface for qubits to operate at such low temperatures. One of the main problems to tackle for cryogenic electronic systems is their power consumption. Power budgets are simply limited to roughly 1 or 2 Watts at 4 K and exponentially lower at deeper cryogenic temperatures, thus limiting the size of large-scale electronic systems. Our approach of combined commercial and custom circuits will have to be steadily replaced by a single (custom) technology that meets both power and scalability constraints. One of the best candidates is CMOS, a technology that the industry has relied upon for several decades and benefits from many optimizations thanks to Moore's law.
Quantum computers hold the promise to solve some of the most complex problems of today. The core of a quantum computer is a quantum processor, which is composed of quantum bits (qubits). Qubits are fragile and their state needs to be corrected in real time by a classical controller. Today, the control of qubits is done at room temperature by racks of instruments, while qubits operate at several tens of milli-Kelvin. To ensure compactness, and eventually scalability, we have proposed the use of controllers operating at a few Kelvin, so as to reduce the length of control cables, while potentially enabling superconductive interconnects, which enable virtually zero resistance and low thermal conductivity. We have chosen CMOS to achieve this functionality due to its scalable nature and overall miniaturization opportunities. Cryogenic CMOS, or cryo-CMOS, circuits and systems need to be carefully designed, so as to ensure low noise and high bandwidth, while operating at strict power budgets of a few milliwatts per qubit. In this paper, we outline the requirements of a classical controller and we show examples of such circuits and systems. Results and perspectives are presented discussing a roadmap for the future.
The core of a quantum computer is a quantum processor, which is composed of quantum bits (qubits). Qubits can be implemented in many flavors, but they are fragile, and their state has a tendency to decay in time. To be usable for computation, qubits must be corrected in real time by a classical controller. The controller must also see that desired computations are executed. Today, the control of qubits is performed at room temperature (RT) by racks of instruments, while the qubits operate at several tens of milli-Kelvin. To ensure compactness and, eventually, scalability, we have proposed and implemented CMOS circuits designed to operate at a few degrees Kelvin. This makes complex thermalization circuits unnecessary, potentially enabling superconductive interconnects, which would enable virtually zero resistance and low thermal conductivity. Cryogenic CMOS, or cryo-CMOS, technology was chosen to achieve classical control due to its scalable nature and overall miniaturization opportunities. Cryo-CMOS circuits and systems need to be carefully designed to ensure strict power budgets, while achieving quite advanced specifications in terms of noise and bandwidth. We review the requirements of a classical controller and cryo-CMOS circuits and systems developed for spin qubits in our lab. Results and perspectives are presented with a discussion about a road map for the future.
Quantum computers hold the promise to solve some of the most complex problems of today. The core of a quantum computer is a quantum processor, which is composed of quantum bits (qubits). Qubits are fragile and their state needs to be corrected in real time by a classical controller. Today, the control of qubits is done at room temperature by racks of instruments, while qubits operate at several tens of milli-Kelvin. To ensure compactness, and eventually scalability, we have proposed the use of controllers operating at a few Kelvin, so as to reduce the length of control cables, while potentially enabling superconductive interconnects, which enable virtually zero resistance and low thermal conductivity. We have chosen CMOS to achieve this functionality due to its scalable nature and overall miniaturization opportunities. Cryogenic CMOS, or cryo-CMOS, circuits and systems need to be carefully designed, so as to ensure low noise and high bandwidth, while operating at strict power budgets of a few milliwatts per qubit. In this paper, we outline the requirements of a classical controller and we show examples of such circuits and systems. Results and perspectives are presented discussing a roadmap for the future.