We present a design strategy for grating magneto-optical traps (GMOTs). It takes the three most relevant optical properties for laser cooling (radiation pressure balance, specular reflection cancellation, and diffracted polarization) to build a scalar figure of merit. We use a rigorous coupled wave analysis (RCWA) simulation to find a geometry that maximizes this figure of merit. We also introduce a criterion that takes into account the robustness of the manufacturing processes to select a geometry that is reliable to manufacture. Finally, we demonstrate that the fabricated grating exhibits the expected optical properties and achieves typical GMOT performance.
We present a design strategy for grating magneto-optical traps (GMOTs). It takes the three most relevant optical properties for laser cooling (radiation pressure balance, specular reflection cancellation, and diffracted polarization) to build a scalar figure of merit. We use a rigorous coupled wave analysis (RCWA) simulation to find a geometry that maximizes this figure of merit. We also introduce a criterion that takes into account the robustness of the manufacturing processes to select a geometry that is reliable to manufacture. Finally, we demonstrate that the fabricated grating exhibits the expected optical properties and achieves typical GMOT performance.
Diffraction gratings integrated into an atomic, molecular, and optical (AMO) setup offer a compact and efficient route toward atom cooling and trapping, thus preparing magneto-optical traps (MOT) for insertion into future scalable quantum systems. Here, we propose and numerically validate a two-dimensional (2D) grating that satisfies the required optical conditions for laser cooling: radiation pressure balance, specular reflection cancellation, and circular polarization handedness reversal upon diffraction. The grating, composed of a 2D array of cylindrical nanoholes, is optimized using RCWA in combination with a Genetic Algorithm (GA). It efficiently diffracts normally incident 780 nm circularly polarized light into the four first orders, each achieving a diffraction efficiency of 0.24, of which 99.7% has the correct circular handedness. This design significantly improves axial radiation pressure balance, potentially eliminating the need for the neutral density (ND) filters that were previously required in grating-MOTs (GMOTs) employing 2D gratings to compensate for the radiation pressure imbalance. The grating's robustness ensures manufacturing resilience.
Integrated diffraction gratings offer a compact route to magneto-optical traps (MOTs) for atom cooling and trapping, thus preparing MOTs for future scalable quantum systems. Although segmented tri-gratings ensure axial radiation pressure balance, they are limited in optical trapping volume. Planar 2D gratings, though offer larger trapping regions, suffer from low diffraction efficiency and the resulting axial pressure imbalance, necessitating the use of a neutral density (ND) filter to achieve this balance. We present a numerically optimized 2D diffraction grating design that overcomes these limitations and satisfies the required optical conditions for laser cooling, namely, radiation pressure balance, specular reflection cancellation, and circular polarization handedness reversal upon diffraction, thus achieving an optical molasses—a necessary condition in MOT. Using rigorous coupled-wave analysis and a genetic algorithm, we design a grating for Rb87 grating MOT (GMOT) that achieves a 24% first-order diffraction efficiency, of which 99.7% have the correct circular handedness. These properties enable efficient atom cooling without an ND filter when used with a flat-top beam inside the vacuum chamber. Our design simplifies optical alignment, reduces system footprint, and advances the integration of GMOTs into compact quantum devices.
Compared with the conventional three-dimensional magneto-optical trap (3D MOT), the grating magneto-optical trap (GMOT) enables the cooling and trapping of atoms with only a single beam of light, thereby significantly reducing the overall volume of the device. Here, a grating chip with high diffraction efficiency is designed, and its parameters are optimized through simulations, which effectively suppresses the power of the zero-order diffracted light. Subsequently, the grating chip is fabricated and characterized, and using this chip, we successfully trap 1.7×106 atoms. The temperatures of the atomic cloud in the axial and radial directions are 5.6 mK and 17.0 mK, respectively. The successful implementation of the atom cooling and trapping experiment based on the diffraction grating provides important reference for the miniaturization of cold atom-based quantum sensors.
The grating magneto-optical trap (GMOT) requires only one beam and three planar diffraction gratings to form a cloud of cold atoms above the plane of the diffractors. Despite the complicated polarization arrangement, we demonstrate sub-Doppler cooling of Rb87 atoms to a temperature of 7.6(0.6) μK through a multistage, far-detuned GMOT in conjunction with optical molasses. A decomposition of the electric field into polarization components for this geometry does not yield a mapping onto standard sub-Doppler laser-cooling configurations. With numerical simulations, we find that the polarization composition of the GMOT optical field, which includes σ and π polarized light, does produce sub-Doppler temperatures.
We demonstrate a two-dimensional (2D) grating magneto-optical trap (GMOT) with a single input cooling laser beam and a planar diffraction grating using 87Rb. This configuration increases experimental access when compared with a traditional 2D magneto-optical trap (MOT). As described in the paper, the output flux is several hundred million rubidium atoms/s at a mean velocity of 16.5(9) m/s and a velocity distribution of 4(3) m/s standard deviation. We use the atomic beam from the 2D GMOT to demonstrate loading of a three-dimensional (3D) GMOT with $2.46(7)\ifmmode\times\else\texttimes\fi{}{10}^{8}$ atoms. Methods to improve output flux are discussed.
Cold atoms produced in magneto-optical traps (MOTs) have underpinned advances in emerging quantum technologies, including quantum computing, precision metrology, and fundamental physics. Grating-based MOT (gMOT), which employs a reflective diffraction grating to enable laser cooling from a single incident beam, offers a compact alternative to conventional six-beam MOTs. However, the inherent asymmetry of gMOT beam geometry can compromise the trapping stability and efficiency, particularly for atomic species with complex internal level structures. Here, we present a geometric-phase dielectric metasurface that simultaneously engineers the transmitted and diffracted wavefronts with desired polarization states, enabling full MOT operation under axial illumination using a single planar optical element. This metasurface-based architecture restores the symmetry in the trapping forces while preserving the compactness and simplicity of gMOTs. Using this approach, we demonstrate the trapping and cooling of cesium─an atomic species widely regarded as challenging for standard gMOT implementations─and analyze the trapping mechanism through numerical calculations. By providing independent control over key trapping parameters within a planar and alignment-simplified platform, this work establishes a route toward compact, robust, and species-flexible cold-atom systems, thereby expanding the applicability of miniaturized MOTs for integrated quantum technologies.