Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1703.07926 · Physical Review A

Two-dimensional grating magneto-optical trap

Eric Imhof, Benjamin Stuhl, Brian L. Kasch, Bethany Kroese, Spencer E. Olson, Matthew B. Squires

Published Sep 29, 2017• 49 citations
arXivHTMLPDF

Abstract

We demonstrate a two-dimensional (2D) grating magneto-optical trap (GMOT) with a single input cooling laser beam and a planar diffraction grating using $^{87}\mathrm{Rb}$. This configuration increases experimental access when compared with a traditional 2D magneto-optical trap (MOT). As described in the paper, the output flux is several hundred million rubidium atoms/s at a mean velocity of 16.5(9) m/s and a velocity distribution of 4(3) m/s standard deviation. We use the atomic beam from the 2D GMOT to demonstrate loading of a three-dimensional (3D) GMOT with $2.46(7)\ifmmode\times\else\texttimes\fi{}{10}^{8}$ atoms. Methods to improve output flux are discussed.

DOI
10.1103/physreva.96.033636

Related papers

Compact strontium atomic beam source based on a two-dimensional grating magneto-optical trap

Hyun Gyung Lee, Young‐Ho Park, Chang Yong Park +11 more

We present a two-dimensional grating magneto-optical trap (2D gMOT) for strontium, which produces a slow atomic beam in a compact form factor. The strontium 2D gMOT, using permanent magnets with an atomic dispenser, cools and traps atoms along two dimensions in the diffraction plane of a grating chip using the 1 S 0 → 1 P 1 (blue) transition. The system is configured in such a way that the atoms emitted from the dispenser source do not degrade the diffraction efficiency of the grating for long-term stable use. The performance of the 2D gMOT is analyzed with plug and probe beams, where the atomic source achieves a flux of 2.1 × 10 8 atoms/s and mean velocity of 6.4 m/s for an input laser power of 75 mW. The velocity measurement allows for the precise characterization of atom-photon scattering properties, showing that the compact 2D gMOT is suitable for portable quantum devices such as atomic clocks, quantum sensors, and precision spectroscopy.

Physical Review Applied•Sep 19, 2025•2 citations

Design and optimization of grating chip for compact magneto-optical trap

Jing Dong, Xiao‐Kuan Li, Wei Li

Compared with the conventional three-dimensional magneto-optical trap (3D MOT), the grating magneto-optical trap (GMOT) enables the cooling and trapping of atoms with only a single beam of light, thereby significantly reducing the overall volume of the device. Here, a grating chip with high diffraction efficiency is designed, and its parameters are optimized through simulations, which effectively suppresses the power of the zero-order diffracted light. Subsequently, the grating chip is fabricated and characterized, and using this chip, we successfully trap 1.7×106 atoms. The temperatures of the atomic cloud in the axial and radial directions are 5.6 mK and 17.0 mK, respectively. The successful implementation of the atom cooling and trapping experiment based on the diffraction grating provides important reference for the miniaturization of cold atom-based quantum sensors.

Applied Optics and Photonics China (AOPC)•Oct 28, 2025•0 citations

High-efficiency 2D grating design for the magneto-optical trap: enhancing intensity balance and reducing optical complexity

Elaheh Karooby, Jiazhen Li, Amit Kumar Agrawal +1 more

Integrated diffraction gratings offer a compact route to magneto-optical traps (MOTs) for atom cooling and trapping, thus preparing MOTs for future scalable quantum systems. Although segmented tri-gratings ensure axial radiation pressure balance, they are limited in optical trapping volume. Planar 2D gratings, though offer larger trapping regions, suffer from low diffraction efficiency and the resulting axial pressure imbalance, necessitating the use of a neutral density (ND) filter to achieve this balance. We present a numerically optimized 2D diffraction grating design that overcomes these limitations and satisfies the required optical conditions for laser cooling, namely, radiation pressure balance, specular reflection cancellation, and circular polarization handedness reversal upon diffraction, thus achieving an optical molasses—a necessary condition in MOT. Using rigorous coupled-wave analysis and a genetic algorithm, we design a grating for Rb87 grating MOT (GMOT) that achieves a 24% first-order diffraction efficiency, of which 99.7% have the correct circular handedness. These properties enable efficient atom cooling without an ND filter when used with a flat-top beam inside the vacuum chamber. Our design simplifies optical alignment, reduces system footprint, and advances the integration of GMOTs into compact quantum devices.

Optical Engineering•Aug 21, 2025•4 citations

Sub-Doppler cooling of neutral atoms in a grating magneto-optical trap

Jongmin Lee, Jeffrey A. Grover, Luis A. Orozco +1 more

The grating magneto-optical trap (GMOT) requires only one beam and three planar diffraction gratings to form a cloud of cold atoms above the plane of the diffractors. Despite the complicated polarization arrangement, we demonstrate sub-Doppler cooling of Rb87 atoms to a temperature of 7.6(0.6) μK through a multistage, far-detuned GMOT in conjunction with optical molasses. A decomposition of the electric field into polarization components for this geometry does not yield a mapping onto standard sub-Doppler laser-cooling configurations. With numerical simulations, we find that the polarization composition of the GMOT optical field, which includes σ and π polarized light, does produce sub-Doppler temperatures.

arXiv:1309.4732•Journal of the Optical Society of America B•Oct 10, 2013•57 citations

Two-color grating magneto-optical trap for narrow-line laser cooling

Saskia Bondza, Christian Lisdat, Stefanie Kroker +1 more

We demonstrate for the first time the two-color cooling and trapping of alkaline-earth atoms in a grating magneto-optical trap (gMOT). The trap is formed by a single incident laser beam together with four secondary beams that are generated via diffraction from a nanostructured wafer. A grating structure for a gMOT operating with strontium atoms is optimized and fabricated. We trap $10^6$ $^{88}$Sr atoms on the $^1$S$_0$ $\rightarrow$ $^1$P$_1$ transition at $461\;\mathrm{nm}$ and transfer $25\;\%$ of these atoms to the second cooling stage on the narrower $^1$S$_0$ $\rightarrow$ $^3$P$_1$ intercombination transition at $689\;\mathrm{nm}$, preparing a sample of $2.5\times 10^5$ atoms at $5\;μ$K. These results demonstrate for the first time the applicability of the gMOT technology in conjunction with two widely differing wavelengths and enable the continued miniaturization of alkaline-earth based quantum technologies like optical atomic clocks.

arXiv:2112.08833•Dec 16, 2021•0 citations

Design and optimization of a high-efficiency and robust 2D grating for the magneto-optical trap

Elaheh Karooby, Jiazhen Li, Amit Kumar Agrawal +1 more

Diffraction gratings integrated into an atomic, molecular, and optical (AMO) setup offer a compact and efficient route toward atom cooling and trapping, thus preparing magneto-optical traps (MOT) for insertion into future scalable quantum systems. Here, we propose and numerically validate a two-dimensional (2D) grating that satisfies the required optical conditions for laser cooling: radiation pressure balance, specular reflection cancellation, and circular polarization handedness reversal upon diffraction. The grating, composed of a 2D array of cylindrical nanoholes, is optimized using RCWA in combination with a Genetic Algorithm (GA). It efficiently diffracts normally incident 780 nm circularly polarized light into the four first orders, each achieving a diffraction efficiency of 0.24, of which 99.7% has the correct circular handedness. This design significantly improves axial radiation pressure balance, potentially eliminating the need for the neutral density (ND) filters that were previously required in grating-MOTs (GMOTs) employing 2D gratings to compensate for the radiation pressure imbalance. The grating's robustness ensures manufacturing resilience.

Low-Dimensional Materials and Devices•Sep 17, 2025•0 citations
We demonstrate a two-dimensional (2D) grating magneto-optical trap (GMOT) with a single input cooling laser beam and a planar diffraction grating using 87Rb^{87}\mathrm{Rb}87Rb. This configuration increases experimental access when compared with a traditional 2D magneto-optical trap (MOT). As described in the paper, the output flux is several hundred million rubidium atoms/s at a mean velocity of 16.5(9) m/s and a velocity distribution of 4(3) m/s standard deviation. We use the atomic beam from the 2D GMOT to demonstrate loading of a three-dimensional (3D) GMOT with 2.46(7)\ifmmode×\else\texttimes\fi1082.46(7)\ifmmode\times\else\texttimes\fi{}{10}^{8}2.46(7)\ifmmode×\else\texttimes\fi108 atoms. Methods to improve output flux are discussed.
We present a two-dimensional grating magneto-optical trap (2D gMOT) for strontium, which produces a slow atomic beam in a compact form factor. The strontium 2D gMOT, using permanent magnets with an atomic dispenser, cools and traps atoms along two dimensions in the diffraction plane of a grating chip using the 1 S 0 → 1 P 1 (blue) transition. The system is configured in such a way that the atoms emitted from the dispenser source do not degrade the diffraction efficiency of the grating for long-term stable use. The performance of the 2D gMOT is analyzed with plug and probe beams, where the atomic source achieves a flux of 2.1 × 10 8 atoms/s and mean velocity of 6.4 m/s for an input laser power of 75 mW. The velocity measurement allows for the precise characterization of atom-photon scattering properties, showing that the compact 2D gMOT is suitable for portable quantum devices such as atomic clocks, quantum sensors, and precision spectroscopy.
Compared with the conventional three-dimensional magneto-optical trap (3D MOT), the grating magneto-optical trap (GMOT) enables the cooling and trapping of atoms with only a single beam of light, thereby significantly reducing the overall volume of the device. Here, a grating chip with high diffraction efficiency is designed, and its parameters are optimized through simulations, which effectively suppresses the power of the zero-order diffracted light. Subsequently, the grating chip is fabricated and characterized, and using this chip, we successfully trap 1.7×106 atoms. The temperatures of the atomic cloud in the axial and radial directions are 5.6 mK and 17.0 mK, respectively. The successful implementation of the atom cooling and trapping experiment based on the diffraction grating provides important reference for the miniaturization of cold atom-based quantum sensors.
Integrated diffraction gratings offer a compact route to magneto-optical traps (MOTs) for atom cooling and trapping, thus preparing MOTs for future scalable quantum systems. Although segmented tri-gratings ensure axial radiation pressure balance, they are limited in optical trapping volume. Planar 2D gratings, though offer larger trapping regions, suffer from low diffraction efficiency and the resulting axial pressure imbalance, necessitating the use of a neutral density (ND) filter to achieve this balance. We present a numerically optimized 2D diffraction grating design that overcomes these limitations and satisfies the required optical conditions for laser cooling, namely, radiation pressure balance, specular reflection cancellation, and circular polarization handedness reversal upon diffraction, thus achieving an optical molasses—a necessary condition in MOT. Using rigorous coupled-wave analysis and a genetic algorithm, we design a grating for Rb87 grating MOT (GMOT) that achieves a 24% first-order diffraction efficiency, of which 99.7% have the correct circular handedness. These properties enable efficient atom cooling without an ND filter when used with a flat-top beam inside the vacuum chamber. Our design simplifies optical alignment, reduces system footprint, and advances the integration of GMOTs into compact quantum devices.
The grating magneto-optical trap (GMOT) requires only one beam and three planar diffraction gratings to form a cloud of cold atoms above the plane of the diffractors. Despite the complicated polarization arrangement, we demonstrate sub-Doppler cooling of Rb87 atoms to a temperature of 7.6(0.6) μK through a multistage, far-detuned GMOT in conjunction with optical molasses. A decomposition of the electric field into polarization components for this geometry does not yield a mapping onto standard sub-Doppler laser-cooling configurations. With numerical simulations, we find that the polarization composition of the GMOT optical field, which includes σ and π polarized light, does produce sub-Doppler temperatures.
We demonstrate for the first time the two-color cooling and trapping of alkaline-earth atoms in a grating magneto-optical trap (gMOT). The trap is formed by a single incident laser beam together with four secondary beams that are generated via diffraction from a nanostructured wafer. A grating structure for a gMOT operating with strontium atoms is optimized and fabricated. We trap 10610^6106 88^{88}88Sr atoms on the 1^11S0_00​ →\rightarrow→ 1^11P1_11​ transition at 461  nm461\;\mathrm{nm}461nm and transfer 25  %25\;\%25% of these atoms to the second cooling stage on the narrower 1^11S0_00​ →\rightarrow→ 3^33P1_11​ intercombination transition at 689  nm689\;\mathrm{nm}689nm, preparing a sample of 2.5×1052.5\times 10^52.5×105 atoms at 5  μ5\;μ5μK. These results demonstrate for the first time the applicability of the gMOT technology in conjunction with two widely differing wavelengths and enable the continued miniaturization of alkaline-earth based quantum technologies like optical atomic clocks.
Diffraction gratings integrated into an atomic, molecular, and optical (AMO) setup offer a compact and efficient route toward atom cooling and trapping, thus preparing magneto-optical traps (MOT) for insertion into future scalable quantum systems. Here, we propose and numerically validate a two-dimensional (2D) grating that satisfies the required optical conditions for laser cooling: radiation pressure balance, specular reflection cancellation, and circular polarization handedness reversal upon diffraction. The grating, composed of a 2D array of cylindrical nanoholes, is optimized using RCWA in combination with a Genetic Algorithm (GA). It efficiently diffracts normally incident 780 nm circularly polarized light into the four first orders, each achieving a diffraction efficiency of 0.24, of which 99.7% has the correct circular handedness. This design significantly improves axial radiation pressure balance, potentially eliminating the need for the neutral density (ND) filters that were previously required in grating-MOTs (GMOTs) employing 2D gratings to compensate for the radiation pressure imbalance. The grating's robustness ensures manufacturing resilience.