Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Optical Design Conference

Optical design of a mode matching telescope for quantum-entangled beams in an EPR squeezer

Hojae Ahn, Seunghyuk Chang, Sumin Lee, Soojong Pak, Changhee Kim, Yunjong Kim, Sungho Lee, S. Di Pace, V. Sequino, M. De Laurentis, F de Marco, Fiodor Sorrentino

Published May 15, 2024• 1 citation
Publisher

Abstract

A mode matching telescope for an EPR squeezer was designed with confocal off-axis configuration. Coupling loss is calculated as 0.02%, and the fabrication is expected to be feasible based on sensitivity analysis and Monte-Carlo simulation.
DOI
10.1117/12.2692566

Related papers

Noise modelling of waveguide based squeezed light sources

Erik Anders Torsten Svanberg, Daniel Voigt, Vaishali Adya

Squeezed states of light are used for precision metrology and quantum-enhanced measurements, with applications spanning communication and sensing. State-of-the-art squeezed-light sources typically rely on optical cavities to achieve high, usable levels of squeezing. Recently, waveguide-based squeezed-light sources have demonstrated significant improvements in achievable squeezing, with performance currently limited by fabrication-induced losses. In this work, we present a detailed analysis of waveguide-based squeezers, examining the effects of phase noise, multiple loss mechanisms, and fundamental light leakage seeding the squeezer. We further investigate a cascaded squeezer architecture, in which a second waveguide operates as a phase-sensitive amplifier to mitigate out-coupling and detection losses. Owing to their ease of integration, robustness to high pump powers, and low intrinsic phase noise, we propose waveguide-based squeezed-light sources as a promising alternative for quantum noise reduction in future gravitational wave detectors, such as the Einstein Telescope.

physics.opticsCross-listedarXiv:2603.26243•Classical and Quantum Gravity•Mar 30, 2026•0 citations

Feasibility study of a coherent feedback squeezer

Shota Yokoyama, Daniel Peace, Warit Asavanant +6 more

We investigate a coherent feedback squeezer that uses quantum coherent feedback (measurement-free) control. Our squeezer is simple, easy to implement, robust to the gain fluctuation, and broadband compared to the existing squeezers because of the negative coherent feedback configuration. We conduct a feasibility study that looks at the stability conditions for a feedback system to optimize the designs of real optical devices. The feasibility study gives fabrication tolerance necessary for designing and realizing the actual device. Our formalism for the stability analysis is not limited to optical systems but can be applied to the other bosonic systems.

arXiv:1912.06281•Physical Review A•Mar 2, 2020•3 citations

Quantum telescope: feasibility and constraints

A. R. Kurek, T. Pięta, Tomasz Stebel +2 more

The quantum telescope is a recent idea aimed at beating the diffraction limit of spaceborne telescopes and possibly other distant target imaging systems. There is no agreement yet on the best setup of such devices, but some configurations have already been proposed. In this Letter we characterize the predicted performance of quantum telescopes and their possible limitations. Our extensive simulations confirm that the presented model of such instruments is feasible and the device can provide considerable gains in the angular resolution of imaging in the UV, optical, and infrared bands. We argue that it is generally possible to construct and manufacture such instruments using the latest or soon to be available technology. We refer to the latest literature to discuss the feasibility of the proposed QT system design.

arXiv:1508.04275•Optics Letters•Mar 3, 2016•10 citations

Approaches of frequency-dependent squeezing for the low frequency detector of the Einstein Telescope

Xingrui Peng, Д. В. Мартынов, Zong‐Hong Zhu +1 more

The quantum noise in gravitational-wave detectors can be suppressed in a broadband by frequency-dependent squeezing. It usually requires one large scale filter cavity and even two, for example in the low frequency detector of Einstein Telescope, which is a detuned dual recycling Fabry-Perot Michelson interferometer. In this paper, we study the feasibility of replacing two filter cavities with a coupled-cavity, aiming to reduce the optical losses with less number of optics. It turns out this approach is only theoretically valid, however, the required parameters of the optics do not support practical implementation, which is consistent with the results in Jones [Implications of the quantum noise target for the Einstein Telescope infrastructure design, ]. Furthermore, we investigate the viability of utilizing Einstein-Podolsky-Rosen (EPR) squeezing to eliminate either one or two filter cavities in the Einstein Telescope. It turns out EPR squeezing would allow us to eliminate one filter cavity, and can potentially improve the detector sensitivity with the allowance of higher input squeezing level, benefiting from the longer length of the arm cavity which serves as one of the filter cavities for frequency-dependent squeezing. Published by the American Physical Society 2024

arXiv:2404.15012•Physical review. D/Physical review. D.•Oct 15, 2024•4 citations

Hybrid SU(1,1) Interferometry in Optomechanics

Chao Meng, Emil Zeuthen, Polina R. Sharapova

In nondegenerate SU(1,1) interferometers, beam splitters are replaced by two-mode squeezers, enabling sub-shot-noise sensitivity without input squeezing and robustness to detection losses by quantum entanglement. We propose a hybrid implementation in optomechanics where one "arm" is a mechanical mode undergoing two consecutive, mode-matched interactions with a traveling optical field (constituting the other arm). Such engineered interactions allow for sub-shot-noise phase detection even in the presence of mechanical thermal noise and optical losses, advancing precision interferometry in hybrid systems.

arXiv:2509.22248•Physical Review Letters•Apr 23, 2026•0 citations

Entanglement Swapping of Bright EPR Optical Beams

Jing Zhang

A scheme achieving quantum entanglement swapping between two pairs of bright EPR optical beams is theoretically proposed. Two pairs of coherent EPR beams are produced from two independent nondegenerate optical parametric amplifiers. The entanglement swapping is demonstrated by means of a half of each EPR beam. The measuring process entangles other two halves of EPR beams that have never directly interacted with each other. In the proposed system, the direct detection of Bell-states is applied instead of usual homodyne detetion. Due to that the local oscillator is not needed, the technic trouble for mode-matching is overcome and the efficiency of the detection can be increased in experiments.

Acta Sinica Quantum Optica•Jan 1, 2002•0 citations
Squeezed states of light are used for precision metrology and quantum-enhanced measurements, with applications spanning communication and sensing. State-of-the-art squeezed-light sources typically rely on optical cavities to achieve high, usable levels of squeezing. Recently, waveguide-based squeezed-light sources have demonstrated significant improvements in achievable squeezing, with performance currently limited by fabrication-induced losses. In this work, we present a detailed analysis of waveguide-based squeezers, examining the effects of phase noise, multiple loss mechanisms, and fundamental light leakage seeding the squeezer. We further investigate a cascaded squeezer architecture, in which a second waveguide operates as a phase-sensitive amplifier to mitigate out-coupling and detection losses. Owing to their ease of integration, robustness to high pump powers, and low intrinsic phase noise, we propose waveguide-based squeezed-light sources as a promising alternative for quantum noise reduction in future gravitational wave detectors, such as the Einstein Telescope.
We investigate a coherent feedback squeezer that uses quantum coherent feedback (measurement-free) control. Our squeezer is simple, easy to implement, robust to the gain fluctuation, and broadband compared to the existing squeezers because of the negative coherent feedback configuration. We conduct a feasibility study that looks at the stability conditions for a feedback system to optimize the designs of real optical devices. The feasibility study gives fabrication tolerance necessary for designing and realizing the actual device. Our formalism for the stability analysis is not limited to optical systems but can be applied to the other bosonic systems.
The quantum telescope is a recent idea aimed at beating the diffraction limit of spaceborne telescopes and possibly other distant target imaging systems. There is no agreement yet on the best setup of such devices, but some configurations have already been proposed. In this Letter we characterize the predicted performance of quantum telescopes and their possible limitations. Our extensive simulations confirm that the presented model of such instruments is feasible and the device can provide considerable gains in the angular resolution of imaging in the UV, optical, and infrared bands. We argue that it is generally possible to construct and manufacture such instruments using the latest or soon to be available technology. We refer to the latest literature to discuss the feasibility of the proposed QT system design.
The quantum noise in gravitational-wave detectors can be suppressed in a broadband by frequency-dependent squeezing. It usually requires one large scale filter cavity and even two, for example in the low frequency detector of Einstein Telescope, which is a detuned dual recycling Fabry-Perot Michelson interferometer. In this paper, we study the feasibility of replacing two filter cavities with a coupled-cavity, aiming to reduce the optical losses with less number of optics. It turns out this approach is only theoretically valid, however, the required parameters of the optics do not support practical implementation, which is consistent with the results in Jones [Implications of the quantum noise target for the Einstein Telescope infrastructure design, ]. Furthermore, we investigate the viability of utilizing Einstein-Podolsky-Rosen (EPR) squeezing to eliminate either one or two filter cavities in the Einstein Telescope. It turns out EPR squeezing would allow us to eliminate one filter cavity, and can potentially improve the detector sensitivity with the allowance of higher input squeezing level, benefiting from the longer length of the arm cavity which serves as one of the filter cavities for frequency-dependent squeezing. Published by the American Physical Society 2024
In nondegenerate SU(1,1) interferometers, beam splitters are replaced by two-mode squeezers, enabling sub-shot-noise sensitivity without input squeezing and robustness to detection losses by quantum entanglement. We propose a hybrid implementation in optomechanics where one "arm" is a mechanical mode undergoing two consecutive, mode-matched interactions with a traveling optical field (constituting the other arm). Such engineered interactions allow for sub-shot-noise phase detection even in the presence of mechanical thermal noise and optical losses, advancing precision interferometry in hybrid systems.
A scheme achieving quantum entanglement swapping between two pairs of bright EPR optical beams is theoretically proposed. Two pairs of coherent EPR beams are produced from two independent nondegenerate optical parametric amplifiers. The entanglement swapping is demonstrated by means of a half of each EPR beam. The measuring process entangles other two halves of EPR beams that have never directly interacted with each other. In the proposed system, the direct detection of Bell-states is applied instead of usual homodyne detetion. Due to that the local oscillator is not needed, the technic trouble for mode-matching is overcome and the efficiency of the detection can be increased in experiments.