We investigate a coherent feedback squeezer that uses quantum coherent feedback (measurement-free) control. Our squeezer is simple, easy to implement, robust to the gain fluctuation, and broadband compared to the existing squeezers because of the negative coherent feedback configuration. We conduct a feasibility study that looks at the stability conditions for a feedback system to optimize the designs of real optical devices. The feasibility study gives fabrication tolerance necessary for designing and realizing the actual device. Our formalism for the stability analysis is not limited to optical systems but can be applied to the other bosonic systems.
We investigate a coherent feedback squeezer that uses quantum coherent feedback (measurement-free) control. Our squeezer is simple, easy to implement, robust to the gain fluctuation, and broadband compared to the existing squeezers because of the negative coherent feedback configuration. We conduct a feasibility study that looks at the stability conditions for a feedback system to optimize the designs of real optical devices. The feasibility study gives fabrication tolerance necessary for designing and realizing the actual device. Our formalism for the stability analysis is not limited to optical systems but can be applied to the other bosonic systems.
The purpose of this paper is to present a theoretic and numerical study of utilizing squeezing and phase shift in coherent feedback control of linear quantum optical systems. A quadrature representation with built-in phase shifters is proposed for such systems. Fundamental structural characterizations of linear quantum optical systems are derived in terms of the new quadrature representation. These results reveal considerable insights into the issue of the physical realizability of such quantum systems. The problem of coherent quantum linear quadratic Gaussian (LQG) feedback control studied in H. I. Nurdin, M. R. James, and I. R. Petersen, Automatica, IFAC, 45 (2009), pp. 1837--1846; G. Zhang and M. R. James, IEEE Trans. Automat. Control, 56 (2011), pp. 1535--1550 is reinvestigated in depth. First, the optimization methods in these papers are extended to a multistep optimization algorithm which utilizes ideal squeezers. Second, a two-stage optimization approach is proposed on the basis of controller parametrization. Numerical studies show that closed-loop systems designed via the second approach may offer LQG control performance even better than that when the closed-loop systems are in the vacuum state. When ideal squeezers in a closed-loop system are replaced by (more realistic) degenerate parametric amplifiers, a sufficient condition is derived for the asymptotic stability of the resultant new closed-loop system; the issue of performance convergence is also discussed in the LQG control setting.
Quantum engineering has seen rapid growth in the past two decades. Physicists, mathematicians and engineers have been working in unison to control a number of diverse systems in the quantum regime. Quantum control involving feedback has become particularly topical, as using information gained from a system can lead to more stable operation of a control protocol. Quantum feedback can be split into two paradigms: measurement based feedback and coherent feedback. Although it is increasingly evident that retaining the coherence of the feedback signal provides an intrinsic advantage over measurement-based feedback, coherent feedback is still a new paradigm. In particular, there are a limited number of options for coherently estimating a state within a feedback loop. As a step towards better understanding and implementation of quantum feedback, this thesis reports on modelling, estimation and control of quantum systems. The first topic is physical realisability of a variety of quantum systems, especially finite level systems and their outgrowths. Bilinear quantum stochastic differential equations (QSDEs) have to be employed to characterise these systems, which is a significant complement to the previous work on linear QSDEs. In light of the fact that direct and indirect couplings play a vital role in quantum network and control, we also provide state-space models for different classes of coupled open quantum systems incorporating both bidirectional and directional interactions. The second topic is coherent observers and optimal filtering. It is well established that classically estimation using the Kalman filter can provide improved performance over direct feedback schemes, and similar demonstrations have been performed for measurement-based quantum feedback. In this thesis I present coherent observers, including least mean squares estimators, which are driven by the coherent output of a specified quantum plant and designed such that some subset of the observer and plant's expectation values converge in the asymptotic limit. Not only can estimators "observe" mean quantities of quantum plant, but also they can "estimate" quantum correlations such as entanglement. This is of much importance to coherent feedback design in the absence of measurement steps without loss of fidelity. Last but not least, several topics regarding stabilisation and control design of quantum systems are discussed in my thesis. To be specific, tools for quantum stability analysis (e.g. Lyapunov conditions) are provided. Both measurement-based feedback and coherent feedback control design are taken into account. A measurement-based optimal controller for opto-mechanical systems aimed at synchronising different mechanical modes is presented, which is application-oriented. Moreover, A general observer-based coherent feedback control framework is studied, and I demonstrate a pole-placement approach via coherent observers that can be applied to various scenarios.
Coherent feedback H∞ control of quantum linear systems
The purpose of this paper is to investigate the coherent feedback H∞ control problem for linear quantum systems. A key contribution is a simplified design methodology that guarantees closed-loop stability and a prescribed level of disturbance attenuation. It is shown that for general linear quantum systems, a physically realizable quantum controller can be obtained by solving at most four Lyapunov equations. In the passive case, a necessary and sufficient condition is provided in terms of two uncoupled pairs of Lyapunov equations. These results represent a significant simplification over the standard approach, which requires solving two coupled algebraic Riccati equations. The effectiveness of the proposed method is demonstrated through two typical quantum optical devices: an empty optical cavity and a degenerate parametric amplifier. These results provide a computationally efficient procedure for the robust and optimal control of quantum optical and optomechanical systems.
The noise reduction in squeezed states makes them a powerful nonclassical resource in quantum technologies, especially in quantum sensing, and an essential step for the ongoing development of non-Gaussian states. In particular, optical and mechanical squeezing can both be generated when light interacts with a mechanical oscillator. Here we use a linear optical system as a controller and use coherent optical feedback to enhance squeezing in the unresolved-sideband regime of optomechanics. Feedback control is generally profitable for cooling, manipulating, and stabilizing the dynamics of mechanical oscillators; coherent feedback is then notable for its ability to steer a quantum system toward the highest squeezing without measurement, avoiding backaction. We thoroughly maximize optical and conditional mechanical squeezing feasible with state-of-the-art experimental setups and derive the optimal conditions under which quantum squeezing is generated in the system. Published by the American Physical Society 2024
This paper surveys some recent results on the feedback control of quantum linear systems and the robustness properties of these systems. Quantum linear systems are a class of systems whose dynamics, which are described by the laws of quantum mechanics, take the specific form of a set of linear quantum stochastic differential equations (QSDEs). These systems can also be described in terms of a Hamiltonian operator H and a coupling operator L, which in the case of quantum linear systems have a specific quadratic and linear form respectively. Such systems commonly arise in the area of quantum optics and related disciplines. Systems whose dynamics can be described or approximated by linear QSDEs include interconnections of optical cavities, beam-splitters, phase-shifters, optical parametric amplifiers, optical squeezers, and cavity quantum electrodynamic systems. An important approach to the feedback control of quantum linear systems involves the use of a controller which itself is a quantum linear system. This approach to quantum feedback control, referred to as coherent quantum feedback control, has the advantage that it does not destroy quantum information, is fast, and has the potential for efficient implementation. The paper discusses recent results concerning the synthesis of coherent quantum controllers such as in coherent quantum H∞ control. Another important issue in the design of quantum feedback controllers is the robustness of the closed loop quantum system to perturbations in the quantum plant dynamics arising from perturbations in the system Hamiltonian H and the system coupling operator L. The paper discusses recent robust stability results for such perturbed quantum systems which take the form of a quantum small gain theorem and a quantum Popov stability criterion. These results are usefu
Quantum computers hold immense promise for solving problems intractable for classical machines, yet their practical realization is hindered by the fragility of quantum states. Quantum Error Correction (QEC) is indispensable for protecting quantum information from environmental noise and operational imperfections. Traditional QEC schemes often rely on measurement-based feedback, which involves performing measurements, processing the classical outcomes, and then applying corrective operations. This process introduces latency, consumes significant resources, and can itself be a source of errors due to the invasive nature of quantum measurement and the classical-quantum interface. Coherent feedback control offers a compelling alternative by allowing the controller to directly interact with the quantum system using quantum fields, without intermediate measurement and classical processing. This maintains the coherence of the quantum information throughout the feedback loop, potentially leading to more robust and faster error correction. This paper explores the theoretical framework and potential advantages of employing coherent feedback control for autonomous QEC. We review existing QEC paradigms, delve into the principles of coherent feedback, and propose how this approach can be integrated into autonomous QEC architectures. Specifically, we investigate its application to bosonic codes and stabilizer codes, discussing the engineering challenges and the prospects for achieving truly fault-tolerant quantum computation by minimizing the classical overhead and enhancing real-time error suppression.