This software supports the paper, "Exploring the scaling limitations of the variational quantum eigensolver with the bond dissociation of hydride diatomic molecules," published in the International Journal of Quantum Chemistry, whose abstract is as follows: Materials simulations involving strongly correlated electrons pose fundamental challenges to state-of-the-art electronic structure methods but are hypothesized to be the ideal use case for quantum computing. To date, no quantum computer has simulated a molecule of a size and complexity relevant to real-world applications, despite the fact that the variational quantum eigensolver (VQE) algorithm can predict chemically accurate total energies. Nevertheless, because of the many applications of moderately-sized, strongly correlated systems, such as molecular catalysts, the successful use of the VQE stands as an important waypoint in the advancement toward useful chemical modeling on near-term quantum processors. In this paper, we take a significant step in this direction. We lay out the steps, write, and run parallel code for an (emulated) quantum computer to compute the bond dissociation curves of the TiH, LiH, NaH, and KH diatomic hydride molecules using VQE. TiH was chosen as a relatively simple chemical system that incorporates d orbitals and strong electron correlation. Because current VQE implementations on existing quantum hardware are limited by qubit error rates, the number of qubits available, and the allowable gate depth, recent studies have focused on chemical systems involving s and p block elements. Through VQE + UCCSD calculations of TiH, we evaluate the near-term feasibility of modeling a molecule with d-orbitals on real quantum hardware. We demonstrate that the inclusion of d-orbitals and the use of the UCCSD ansatz, which are both necessary to capture the correct TiH physics, dramatically increase the cost of this problem. We estimate the approximate error rates necessary to model TiH on current quantum computing hardware using VQE+UCCSD and show them to likely be prohibitive until significant improvements in hardware and error correction algorithms are available.
This software supports the paper, "Exploring the scaling limitations of the variational quantum eigensolver with the bond dissociation of hydride diatomic molecules," published in the International Journal of Quantum Chemistry, whose abstract is as follows: Materials simulations involving strongly correlated electrons pose fundamental challenges to state-of-the-art electronic structure methods but are hypothesized to be the ideal use case for quantum computing. To date, no quantum computer has simulated a molecule of a size and complexity relevant to real-world applications, despite the fact that the variational quantum eigensolver (VQE) algorithm can predict chemically accurate total energies. Nevertheless, because of the many applications of moderately-sized, strongly correlated systems, such as molecular catalysts, the successful use of the VQE stands as an important waypoint in the advancement toward useful chemical modeling on near-term quantum processors. In this paper, we take a significant step in this direction. We lay out the steps, write, and run parallel code for an (emulated) quantum computer to compute the bond dissociation curves of the TiH, LiH, NaH, and KH diatomic hydride molecules using VQE. TiH was chosen as a relatively simple chemical system that incorporates d orbitals and strong electron correlation. Because current VQE implementations on existing quantum hardware are limited by qubit error rates, the number of qubits available, and the allowable gate depth, recent studies have focused on chemical systems involving s and p block elements. Through VQE + UCCSD calculations of TiH, we evaluate the near-term feasibility of modeling a molecule with d-orbitals on real quantum hardware. We demonstrate that the inclusion of d-orbitals and the use of the UCCSD ansatz, which are both necessary to capture the correct TiH physics, dramatically increase the cost of this problem. We estimate the approximate error rates necessary to model TiH on current quantum computing hardware using VQE+UCCSD and show them to likely be prohibitive until significant improvements in hardware and error correction algorithms are available.
Abstract Materials simulations involving strongly correlated electrons pose fundamental challenges to state‐of‐the‐art electronic structure methods but are hypothesized to be the ideal use case for quantum computing algorithms. To date, no quantum computer has simulated a molecule of a size and complexity relevant to real‐world applications, despite the fact that the variational quantum eigensolver (VQE) algorithm can predict chemically accurate total energies. Nevertheless, because of the many applications of moderately sized, strongly correlated systems, such as molecular catalysts, the successful use of the VQE stands as an important waypoint in the advancement toward useful chemical modeling on near‐term quantum processors. In this paper, we take a significant step in this direction. We lay out the steps, write, and run parallel code for an (emulated) quantum computer to compute the bond dissociation curves of the TiH, LiH, NaH, and KH diatomic hydride molecules using the VQE. TiH was chosen as a relatively simple chemical system that incorporates d orbitals and strong electron correlation. Because current VQE implementations on existing quantum hardware are limited by qubit error rates, the number of qubits available, and the allowable gate depth, recent studies using it have focused on chemical systems involving s and p block elements. Through VQE + UCCSD calculations of TiH, we evaluate the near‐term feasibility of modeling a molecule with d‐orbitals on real quantum hardware. We demonstrate that the inclusion of d‐orbitals and the use of the UCCSD ansatz, which are both necessary to capture the correct TiH physics, dramatically increase the cost of this problem. We estimate the approximate error rates necessary to model TiH on current quantum computing hardware using VQE + UCCSD and show them to likely be prohibitive until significant improvements in hardware and error correction algorithms are available.
The advancements in classical computational components such as CPUs and GPUs have had a reverberating impact on the democratization of computational power available, with the field of computational chemistry reaping significant benefits from the propulsion of the limits of systems studied. The accurate prediction of chemical properties and reaction dynamics through computational simulation is now a centerpiece of modern chemical research, significantly accelerating discoveries research areas of materials science and drug development, as well as industrially relevant processes such as the emission of aldehydes from soft foams, flame retardants and pyrolysis and the carbonylation of epoxides. These achievements of computational chemistry still are overshadowed in the face of fundamental bottlenecks where classical methods remain constrained by the exponential scaling when treating large and/or strongly correlated quantum many-body systems. This innate computational complexity often constitutes chemically accurate calculations based on first principles impractical, or plain impossible, for systems beyond modest sizes. Quantum computing offers a potential pathway around these limitations, originally formally formulated by David Deutsch as a tool for simulating quantum systems, with the first quantum algorithms indicating speed-ups compared to classical counterparts arising from Peter Shor and Lov Grover for the prime factorization of an integer number and unstructured search respectively. Relying on fundamental theorems by Claude Shannon, it has been demonstrated that through the use of error-correcting codes fault-tolerant quantum computers are able to safeguard information against noise and decoherence, strongly indicating towards exponential speedups in solving central computational chemistry problems, such as determining ground state energies or reaction pathways of chemical systems. Substantial strides in experimental quantum computing over the past decade, including proof-of-principle demonstrations of quantum error correction, mean to bring full-scale fault-tolerant quantum computing within the grasp of humanity. The breakthroughs needed to attain scalable, error-corrected quantum computation with capabilities exceeding those of classical methods in real-world scenarios is likely still some years away. While striving to address the engineering challenges standing in the way of achieving fault tolerant quantum computing, substantial effort has been focused toward developing and benchmarking hybrid algorithms tailored for the Noisy Intermediate- Scale Quantum (NISQ) devices, available now to researchers. These hybrid quantum-classical algorithms, with the most notable being the Variational Quantum Eigensolver (VQE), allow the probing of quantum computing’s utility in computational chemistry even in the face of significant hardware noise and limited coherence times. The work presented in this thesis introduces several key additions the VQE framework, geared especially towards to NISQ hardware, where the mindful use of available resources is imperative. First, the implementation of the Conjugate Model Search optimizer is described, an optimization method that integrates simple models that are surrogate to the original function, combined with conjugate gradient optimization to navigate effectively parameter landscapes typical of variational algorithms, prone to noise. Second, this thesis contains the proposal and extensive study of a hyperparameter tuning procedure employing genetic algorithms, allowing for comprehensive simulation benchmarks that augment the robustness and efficiency of VQE implementations with respect to convergence time through real wall-time models of quantum processors. Continuing, a bridge is presented between quantum simulation and quantum chemistry, through qubit-to-fermion mappings of existing quantum gates, further enabling the direct and accurate modeling of chemical systems on trapped atom quantum hardware with the added arsenal provided by techniques designed for qubit architectures. Additionally, experimental data contained in this thesis include detailed benchmarking data collected from state-of-the-art trapped ion quantum processors available at the Johannes Gutenberg Universität Mainz, demonstrating the actual viability and performance of various methodologies for extracting results. Lastly, the state of VQE is examined, as it served as a springboard for a plethora of advancements in the development of quantum computing hardware, as well as the direction the field of simulation of computational quantum chemistry via quantum devices is headed towards in the coming years.
One of the most important application areas of molecular quantum chemistry is the study and prediction of chemical reactivity. Large-scale, fully error-tolerant quantum computers could provide exact or near-exact solutions to the underlying electronic structure problem with exponentially less effort than a classical computer thus enabling highly accurate predictions for comparably large molecular systems. In the nearer future, however, only “noisy” devices with a limited number of qubits that are subject to decoherence will be available. For such near-term quantum computers the hybrid quantum-classical variational quantum eigensolver algorithm in combination with the unitary coupled-cluster ansatz (UCCSD-VQE) [Peruzzo et al. Nat. Commun. 2014, 5, 4213 and McClean et al. New J. Phys. 2016, 18, 023023] has become an intensively discussed approach that could provide accurate results before the dawn of error-tolerant quantum computing. In this work we present an implementation of UCCSD-VQE that allows for the first time to treat both open- and closed-shell molecules. We study the accuracy of the obtained energies for nine small molecular systems as well as for four exemplary chemical reactions by comparing to well-established electronic structure methods like (nonunitary) coupled-cluster and density functional theory. Finally, we roughly estimate the required quantum hardware resources to obtain “useful” results for practical purposes.
The accurate prediction and understanding of molecular energy and chemical reactivity are fundamental pursuits in the field of molecular quantum chemistry. With the limitations of the current noisy intermediate scale quantum computer (NISQ) era, the Variational Quantum Eigensolver (VQE) algorithm offers a promising approach to efficiently estimate the stable energy state of a given molecule. This study is focused on predicting the ground state and single electron detachment energy of the hydride ion because of its high electron electron correlation and numerous applications in astrophysics and quantum chemistry. The hydride ion is the first three body quantum problem for which the ground state energy has been calculated theoretically using the Chandrasekhar Wavefunction, which takes high electron-electron correlation into account. For the calculation of hydride ion, we used the VQE algorithm with two types of quantum computational ansatz, (i) chemistry inspired ansatz based on unitary CC (UCC) and (ii) hardware efficient based ansatz (HEA). To check the versatility of the algorithm, we analyzed two proton transfer reactions involving the hydride ion and finds the energy to be exothermic with a much improved result compared to previous studies. Overall, the VQE algorithm with a quantum computational approach is found to be reliable in calculating stable state energy, single electron detachment energy, and reaction energy for proton transfer reactions involving a highly correlated molecule with a low relative percentage error.
Quantum computers offer significant potential for complex system analysis, yet their application in large systems is hindered by limitations such as qubit availability and quantum hardware noise. While the variational quantum eigensolver (VQE) was proposed to address these issues, its scalability remains limited. Many efforts, including new ansätze and Hamiltonian modifications, have been made to overcome these challenges. In this work, we introduced the novel Fragment Molecular Orbital/Variational Quantum Eigensolver (FMO/VQE) algorithm. This method combines the fragment molecular orbital (FMO) approach with VQE and efficiently utilizes qubits for quantum chemistry simulations. Employing the UCCSD ansatz, the FMO/VQE achieved an absolute error of just 0.053 mHa with 8 qubits in a [Formula: see text] system using the STO-3G basis set, and an error of 1.376 mHa with 16 qubits in a [Formula: see text] system with the 6-31G basis set. These results indicated a significant advancement in scalability over conventional VQE, maintaining accuracy with fewer qubits. Therefore, our FMO/VQE method exemplifies how integrating fragment-based quantum chemistry with quantum algorithms can enhance scalability, facilitating more complex molecular simulations and aligning with quantum computing advancements.
The variational quantum eigensolver (VQE) is currently the flagship algorithm for solving electronic structure problems on near-term quantum computers. This hybrid quantum/classical algorithm involves implementing a sequence of parameterized gates on quantum hardware to generate a target quantum state, and then measuring the expectation value of the molecular Hamiltonian. Due to finite coherence times and frequent gate errors, the number of gates that can be implemented remains limited on current quantum devices, preventing accurate applications to systems with significant entanglement, such as strongly correlated molecules. In this work, we propose an alternative algorithm (which we refer to as ctrl-VQE) where the quantum circuit used for state preparation is removed entirely and replaced by a quantum control routine which variationally shapes a pulse to drive the initial Hartree-Fock state to the full CI target state. As with VQE, the objective function optimized is the expectation value of the qubit-mapped molecular Hamiltonian. However, by removing the quantum circuit, the coherence times required for state preparation can be drastically reduced by directly optimizing the pulses. We demonstrate the potential of this method numerically by directly optimizing pulse shapes which accurately model the dissociation curves of the hydrogen molecule (covalent bond) and helium hydride ion (ionic bond), and we compute the single point energy for LiH with four transmons.