Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics Continuum

Optical levitation in high vacuum using a 0.9-numerical-aperture lens

Mayu Tanaka, Shota Suetomo, Nao Osato, Seiya Shinkawa, Feng-Lei Hong, Daisuke Akamatsu

Published Sep 7, 2023• 0 citations
Publisher

Abstract

Nanoparticles levitated in high vacuum are isolated from the surrounding environment and thus can be used in various applications, including quantum physics research. We demonstrated optical levitation of a nanoparticle, which was trapped without cooling at a pressure of 4.5 × 10 −3 Pa, using a single aspheric lens with a large numerical aperture (= 0.9) and 1030-nm laser. We also activated parametric feedback cooling to trap the particle at a pressure of 5.8 × 10 −4 Pa. This experimental system will be useful for studying nanoparticles in ultrahigh vacuum and for building a mixed system with laser-cooled atoms.

DOI
10.1364/optcon.501654

Related papers

Feedback cooling of a levitated nanoparticle in a radially polarized vector beam trap

Felipe Almeida, M. Rademacher, J. M. H. Gosling +1 more

We demonstrate optical levitation and feedback cooling of a silica nanoparticle (radius = 78~nm) trapped within a radial vector beam (RVB) in high vacuum. Radial vector beams, when focused by a high-NA lens, produce a smaller focal spot than conventional Gaussian beams, yielding tighter optical potentials and potentially reduced photon-recoil heating rates. A vortex wave plate was used to generate the RVB using an aspheric lens (NA = 0.77) to form the trap. Cold-damping feedback was used to cool the center of mass motion in the radial and axial trap directions to temperatures in the mK range. At higher temperatures and pressures, additional trap frequencies arising from the nonlinear RVB optical potential are observed. This demonstration is a step toward exploiting structured light for levitated quantum optomechanics where these traps can be used to suppress bulk and motional heating.

physics.opticsCross-listedarXiv:2609.31068•Sep 28, 2026•0 citations

Cooling and manipulation of a levitated nanoparticle with an optical fiber trap

Pau Mestres, Johann Berthelot, Marko Spasenović +3 more

Accurate delivery of small targets in high vacuum is a pivotal task in many branches of science and technology. Beyond the different strategies developed for atoms, proteins, macroscopic clusters, and pellets, the manipulation of neutral particles over macroscopic distances still poses a formidable challenge. Here, we report an approach based on a mobile optical trap operated under feedback control that enables cooling and long range 3D manipulation of a silica nanoparticle in high vacuum. We apply this technique to load a single nanoparticle into a high-finesse optical cavity through a load-lock vacuum system. We foresee our scheme to benefit the field of optomechanics with levitating nano-objects as well as ultrasensitive detection and monitoring.

arXiv:1505.02012•Applied Physics Letters•Oct 12, 2015•65 citations

Optical trap of a nanoparticle in ultra-high vacuum towards a mixture of a nanoparticle and a laser-cooled gas

Daisuke Akamatsu

A single nanoparticle of SiO2is optically trapped inside an ultrahigh-vacuum compatible chamber system. The motion of the particle inside the trap is observed with the Michelson-type interferometer. The system presented in this paper will enable us to realize a mixture of a single nanoparticle and a laser-cooled gas for investigating interaction between a mesoscopic particle and laser-cooled atoms.

Conference on Lasers and Electro-Optics Pacific Rim (CLEO-PR)•Jul 1, 2017•0 citations

On-demand assembly of optically-levitated nanoparticle arrays in vacuum

Yan, Jiangwei, Xudong Yu, Zheng Han +2 more

Realizing a large-scale fully controllable quantum system is a challenging task in current physical research and has broad applications. Ultracold atom and molecule arrays in optical tweezers in vacuum have been used for quantum simulation, quantum metrology and quantum computing. Recently, quantum ground state cooling of the center-of-mass motion of a single optically levitated nanoparticle in vacuum was demonstrated, providing unprecedented opportunities for studying macroscopic quantum mechanics and precision measurements. In this work, we create a reconfigurable optically-levitated nanoparticle array in vacuum. Our optically-levitated nanoparticle array allows full control of individual nanoparticles to form an arbitrary pattern and detect their motion. As a concrete example, we choose two nanoparticles without rotation signals from an array to synthesize a nanodumbbell in-situ by merging them into one trap. The nanodumbbell synthesized in-situ can rotate beyond 1 GHz. Our work provides a new platform for studying macroscopic many-body physics.

arXiv:2207.03641•Jul 8, 2022•1 citation

Electro-Optical Metalens for Near-Surface Cooling of a Levitated Particle

Pedro Rosso Gomez, Bruno Melo, Adeel Afridi +3 more

Advanced levitation optomechanics in the quantum regime requires sophisticated quantumengineered protocols operating at shorter length and time scales, demanding an increasing control over both optical and electrical potentials. Integrated chip-scale platforms offer a natural route toward such control. Here, we demonstrate optical levitation in vacuum using a miniaturized hybrid electro-optical metalens. Motion control is achieved using a high numerical aperture metalens combined with electrical active feedback using planar electrodes, enabling cooling to low phonon occupations. Reheating measurements enable us to rule out any significant influence from electric field noise; an encouraging result for the future development of on-chip levitation platforms operating close to surfaces. This compact integrated platform facilitates the precise manipulation and control of levitated nanoparticles while laying the ground toward exploiting the full capacity of metaoptics to engineer complex optical potentials, marking a significant step forward in technologies for quantum levitation optomechanics.

physics.opticsCross-listedarXiv:2610.06279•Oct 6, 2026

An apparatus for in-vacuum loading of nanoparticles into an optical trap

Evan Weisman, Chethn Galla, Cris Montoya +7 more

We describe the design, construction, and operation of an apparatus that utilizes a piezoelectric transducer for in-vacuum loading of nanoparticles into an optical trap for use in levitated optomechanics experiments. In contrast to commonly used nebulizer-based trap-loading methods that generate aerosolized liquid droplets containing nanoparticles, the method produces dry aerosols of both spherical and high-aspect ratio particles ranging in size by approximately two orders of magnitude. The device has been shown to generate accelerations of order 107 g, which is sufficient to overcome stiction forces between glass nanoparticles and a glass substrate for particles as small as 170 nm in diameter. Particles with sizes ranging from 170 nm to ∼10μm have been successfully loaded into optical traps at pressures ranging from 1 bar to 0.6 mbar. We report the velocity distribution of the particles launched from the substrate, and our results indicate promise for direct loading into ultra-high-vacuum with sufficient laser feedback cooling. This loading technique could be useful for the development of compact fieldable sensors based on optically levitated nanoparticles as well as matter–wave interference experiments with ultra-cold nano-objects, which rely on multiple repeated free-fall measurements and thus require rapid trap re-loading in high vacuum conditions.

arXiv:2208.02102•Review of Scientific Instruments•Nov 1, 2022•14 citations
Nanoparticles levitated in high vacuum are isolated from the surrounding environment and thus can be used in various applications, including quantum physics research. We demonstrated optical levitation of a nanoparticle, which was trapped without cooling at a pressure of 4.5 × 10 −3 Pa, using a single aspheric lens with a large numerical aperture (= 0.9) and 1030-nm laser. We also activated parametric feedback cooling to trap the particle at a pressure of 5.8 × 10 −4 Pa. This experimental system will be useful for studying nanoparticles in ultrahigh vacuum and for building a mixed system with laser-cooled atoms.
We demonstrate optical levitation and feedback cooling of a silica nanoparticle (radius = 78~nm) trapped within a radial vector beam (RVB) in high vacuum. Radial vector beams, when focused by a high-NA lens, produce a smaller focal spot than conventional Gaussian beams, yielding tighter optical potentials and potentially reduced photon-recoil heating rates. A vortex wave plate was used to generate the RVB using an aspheric lens (NA = 0.77) to form the trap. Cold-damping feedback was used to cool the center of mass motion in the radial and axial trap directions to temperatures in the mK range. At higher temperatures and pressures, additional trap frequencies arising from the nonlinear RVB optical potential are observed. This demonstration is a step toward exploiting structured light for levitated quantum optomechanics where these traps can be used to suppress bulk and motional heating.
Accurate delivery of small targets in high vacuum is a pivotal task in many branches of science and technology. Beyond the different strategies developed for atoms, proteins, macroscopic clusters, and pellets, the manipulation of neutral particles over macroscopic distances still poses a formidable challenge. Here, we report an approach based on a mobile optical trap operated under feedback control that enables cooling and long range 3D manipulation of a silica nanoparticle in high vacuum. We apply this technique to load a single nanoparticle into a high-finesse optical cavity through a load-lock vacuum system. We foresee our scheme to benefit the field of optomechanics with levitating nano-objects as well as ultrasensitive detection and monitoring.
Realizing a large-scale fully controllable quantum system is a challenging task in current physical research and has broad applications. Ultracold atom and molecule arrays in optical tweezers in vacuum have been used for quantum simulation, quantum metrology and quantum computing. Recently, quantum ground state cooling of the center-of-mass motion of a single optically levitated nanoparticle in vacuum was demonstrated, providing unprecedented opportunities for studying macroscopic quantum mechanics and precision measurements. In this work, we create a reconfigurable optically-levitated nanoparticle array in vacuum. Our optically-levitated nanoparticle array allows full control of individual nanoparticles to form an arbitrary pattern and detect their motion. As a concrete example, we choose two nanoparticles without rotation signals from an array to synthesize a nanodumbbell in-situ by merging them into one trap. The nanodumbbell synthesized in-situ can rotate beyond 1 GHz. Our work provides a new platform for studying macroscopic many-body physics.
Advanced levitation optomechanics in the quantum regime requires sophisticated quantumengineered protocols operating at shorter length and time scales, demanding an increasing control over both optical and electrical potentials. Integrated chip-scale platforms offer a natural route toward such control. Here, we demonstrate optical levitation in vacuum using a miniaturized hybrid electro-optical metalens. Motion control is achieved using a high numerical aperture metalens combined with electrical active feedback using planar electrodes, enabling cooling to low phonon occupations. Reheating measurements enable us to rule out any significant influence from electric field noise; an encouraging result for the future development of on-chip levitation platforms operating close to surfaces. This compact integrated platform facilitates the precise manipulation and control of levitated nanoparticles while laying the ground toward exploiting the full capacity of metaoptics to engineer complex optical potentials, marking a significant step forward in technologies for quantum levitation optomechanics.
We describe the design, construction, and operation of an apparatus that utilizes a piezoelectric transducer for in-vacuum loading of nanoparticles into an optical trap for use in levitated optomechanics experiments. In contrast to commonly used nebulizer-based trap-loading methods that generate aerosolized liquid droplets containing nanoparticles, the method produces dry aerosols of both spherical and high-aspect ratio particles ranging in size by approximately two orders of magnitude. The device has been shown to generate accelerations of order 107 g, which is sufficient to overcome stiction forces between glass nanoparticles and a glass substrate for particles as small as 170 nm in diameter. Particles with sizes ranging from 170 nm to ∼10μm have been successfully loaded into optical traps at pressures ranging from 1 bar to 0.6 mbar. We report the velocity distribution of the particles launched from the substrate, and our results indicate promise for direct loading into ultra-high-vacuum with sufficient laser feedback cooling. This loading technique could be useful for the development of compact fieldable sensors based on optically levitated nanoparticles as well as matter–wave interference experiments with ultra-cold nano-objects, which rely on multiple repeated free-fall measurements and thus require rapid trap re-loading in high vacuum conditions.