Advanced levitation optomechanics in the quantum regime requires sophisticated quantumengineered protocols operating at shorter length and time scales, demanding an increasing control over both optical and electrical potentials. Integrated chip-scale platforms offer a natural route toward such control. Here, we demonstrate optical levitation in vacuum using a miniaturized hybrid electro-optical metalens. Motion control is achieved using a high numerical aperture metalens combined with electrical active feedback using planar electrodes, enabling cooling to low phonon occupations. Reheating measurements enable us to rule out any significant influence from electric field noise; an encouraging result for the future development of on-chip levitation platforms operating close to surfaces. This compact integrated platform facilitates the precise manipulation and control of levitated nanoparticles while laying the ground toward exploiting the full capacity of metaoptics to engineer complex optical potentials, marking a significant step forward in technologies for quantum levitation optomechanics.
Advanced levitation optomechanics in the quantum regime requires sophisticated quantumengineered protocols operating at shorter length and time scales, demanding an increasing control over both optical and electrical potentials. Integrated chip-scale platforms offer a natural route toward such control. Here, we demonstrate optical levitation in vacuum using a miniaturized hybrid electro-optical metalens. Motion control is achieved using a high numerical aperture metalens combined with electrical active feedback using planar electrodes, enabling cooling to low phonon occupations. Reheating measurements enable us to rule out any significant influence from electric field noise; an encouraging result for the future development of on-chip levitation platforms operating close to surfaces. This compact integrated platform facilitates the precise manipulation and control of levitated nanoparticles while laying the ground toward exploiting the full capacity of metaoptics to engineer complex optical potentials, marking a significant step forward in technologies for quantum levitation optomechanics.
Abstract Tests of quantum mechanics on a macroscopic scale require extreme control over mechanical motion and its decoherence [1-4]. Quantum control of mechanical motion has been achieved by engineering the radiation pressure coupling between a micromechanical oscillator and the electromagnetic field in a resonator [5-8]. Furthermore, measurement-based feedback control relying on cavity-enhanced detection schemes has been used to cool micromechanical oscillators to their quantum ground states [9]. In contrast to mechanically tethered systems, optically levitated nanoparticles are particularly promising candidates for matter-wave experiments with massive objects [10,11], since their trapping potential is fully controllable. In this work, we optically levitate a femto-gram dielectric particle in cryogenic free space, which suppresses thermal effects sufficiently to make the measurement backaction the dominant decoherence mechanism. With an efficient quantum measurement, we exert quantum control over the dynamics of the particle. We cool its center-of-mass motion by measurement-based feedback to an average occupancy of 0.65 motional quanta, corresponding to a state purity of 43%. The absence of an optical resonator and its bandwidth limitations holds promise to transfer the full quantum control available for electromagnetic fields to a mechanical system. Together with the fact that the optical trapping potential is highly controllable, our experimental platform offers a route to investigating quantum mechanics at macroscopic scales [12,13].
Accurate delivery of small targets in high vacuum is a pivotal task in many branches of science and technology. Beyond the different strategies developed for atoms, proteins, macroscopic clusters, and pellets, the manipulation of neutral particles over macroscopic distances still poses a formidable challenge. Here, we report an approach based on a mobile optical trap operated under feedback control that enables cooling and long range 3D manipulation of a silica nanoparticle in high vacuum. We apply this technique to load a single nanoparticle into a high-finesse optical cavity through a load-lock vacuum system. We foresee our scheme to benefit the field of optomechanics with levitating nano-objects as well as ultrasensitive detection and monitoring.
We present a hybrid trapping platform that allows us to levitate a charged nanoparticle in high vacuum using either optical fields, radio-frequency fields, or a combination thereof. Our hybrid approach combines an optical dipole trap with a linear Paul trap while maintaining a large numerical aperture (0.77 NA). We detail a controlled transfer procedure that allows us to use the Paul trap as a “safety net” to recover particles lost from the optical trap at high vacuum. The presented hybrid platform adds to the toolbox of levitodynamics and represents an important step towards fully controllable “dark” potentials, providing control in the absence of decoherence because of photon recoil. Published by the American Physical Society 2024
Levitation of microscopic objects in vacuum combines exceptional environmental isolation with precise control of their dynamics, pushing the limits of sensing and macroscopic quantum physics. In particular, magnetic levitation allows a large range of particle sizes, while avoiding detrimental effects from high-intensity optical trapping beams and electric field noise. However, existing diamagnetic and Meissner levitation approaches are typically constrained by low mechanical eigenfrequencies, limited integrability with other systems due to bulky coils or magnets, and, for Meissner levitation, the need for cryogenic operation. Here, we demonstrate a room-temperature on-chip magnetic levitation platform capable of stably levitating a nanogram (6.5 micrometer radius) ferromagnetic microsphere. The platform is scalable and tunable, and supports librational modes with eigenfrequencies exceeding 10 kHz. Further miniaturization and coupling to solid-state spin qubits could enable cooling to the quantum ground state. Beyond quantum experiments, this architecture enables integrated precision sensing and studies of isolated ferromagnet thermodynamics.
Abstract Tests of quantum mechanics on a macroscopic scale require extreme control over mechanical motion and its decoherence1–3. Quantum control of mechanical motion has been achieved by engineering the radiation–pressure coupling between a micromechanical oscillator and the electromagnetic field in a resonator4–7. Furthermore, measurement-based feedback control relying on cavity-enhanced detection schemes has been used to cool micromechanical oscillators to their quantum ground states8. In contrast to mechanically tethered systems, optically levitated nanoparticles are particularly promising candidates for matter-wave experiments with massive objects9, 10, since their trapping potential is fully controllable. Here we optically levitate a femtogram (10−15 grams) dielectric particle in cryogenic free space, which suppresses thermal effects sufficiently to make the measurement backaction the dominant decoherence mechanism. With an efficient quantum measurement, we exert quantum control over the dynamics of the particle. We cool its centre-of-mass motion by measurement-based feedback to an average occupancy of 0.65 motional quanta, corresponding to a state purity of 0.43. The absence of an optical resonator and its bandwidth limitations holds promise to transfer the full quantum control available for electromagnetic fields to a mechanical system. Together with the fact that the optical trapping potential is highly controllable, our experimental platform offers a route to investigating quantum mechanics at macroscopic scales11.
Optomechanical cooling of levitated nanoparticles has become an essential topic in modern quantum physics, providing a platform for exploring macroscopic quantum phenomena and high-precision sensing. However, conventional cavity-assisted cooling is fundamentally constrained by cavity dissipation and environmental noise, limiting the attainable minimum temperature. In this work, we propose a non-Hermitian optomechanical cooling scheme through nonreciprocal coupling between two levitated nanoparticles, where one particle is directly cooled by an optical cavity and the other is cooled indirectly through a non-Hermitian interaction. Both analytical solutions and numerical simulations reveal that increasing nonreciprocity enhances directional energy transfer, enabling the target particle to reach a lower phonon occupation than is achievable in conventional cavity cooling. This study demonstrates a new cooling mechanism driven by non-Hermitian interactions, offering theoretical guidance for realizing controllable energy flow and deep cooling in levitated optomechanical systems, and paving the way for future developments in quantum control and sensing technologies.