Transmon-type superconducting qubits have become a popular platform for quantum computing due to their robust qubit coherence properties. In recent years, different types of materials have been searched to replace the Al2O3 tunnel barrier in conventional Al-based Josephson junctions, in order to explore new functions of qubits utilizing the distinct nature of the chosen materials. In this report, we introduce our works involving using Weyl semimetals and graphene as a component in Josephson junctions for qubit designs and coupling to coplanar waveguide (CPW) resonators. We fabricate a MoTe2 transmon and investigate whether it exhibits topological properties by tuning the resonator frequency with magnetic flux. Next, we introduce a graphene gatemon, in which the gate-tunability of resonator frequency has been demonstrated and the two-tone spectroscopy has shown a qubit state transition.
Transmon-type superconducting qubits have become a popular platform for quantum computing due to their robust qubit coherence properties. In recent years, different types of materials have been searched to replace the Al2O3 tunnel barrier in conventional Al-based Josephson junctions, in order to explore new functions of qubits utilizing the distinct nature of the chosen materials. In this report, we introduce our works involving using Weyl semimetals and graphene as a component in Josephson junctions for qubit designs and coupling to coplanar waveguide (CPW) resonators. We fabricate a MoTe2 transmon and investigate whether it exhibits topological properties by tuning the resonator frequency with magnetic flux. Next, we introduce a graphene gatemon, in which the gate-tunability of resonator frequency has been demonstrated and the two-tone spectroscopy has shown a qubit state transition.
Weyl semimetals have drawn considerable attention for their exotic topological properties in many research fields. When in combination with s-wave superconductors, the supercurrent can be carried by their topological surface channels, forming junctions mimicking the behavior of Majorana bound states. Here, we present a transmon-like superconducting quantum intereference device (SQUID) consisting of lateral junctions made of Weyl semimetal Td–MoTe 2 and superconducting leads of niobium nitride (NbN). The SQUID is coupled to a readout cavity made of molybdenum rhenium (MoRe), whose response at high power reveals the existence of the constituting Josephson junctions (JJs). The loop geometry of the circuit allows the resonant frequency of the readout cavity to be tuned by the magnetic flux. We demonstrate a JJ made of MoTe 2 and a flux-tunable transmon-like circuit based on Weyl semimetals. Our study provides a platform to utilize topological materials in SQUID-based quantum circuits for potential applications in quantum information processing.
Gate-tunable transmons (gatemons) employing semiconductor Josephson junctions have recently emerged as building blocks for hybrid quantum circuits. In this study, we present a gatemon fabricated in planar Germanium. We induce superconductivity in a two-dimensional hole gas by evaporating aluminum atop a thin spacer, which separates the superconductor from the Ge quantum well. The Josephson junction is then integrated into an Xmon circuit and capacitively coupled to a transmission line resonator. We showcase the qubit tunability in a broad frequency range with resonator and two-tone spectroscopy. Time-domain characterizations reveal energy relaxation and coherence times up to 75 ns. Our results, combined with the recent advances in the spin qubit field, pave the way towards novel hybrid and protected qubits in a group IV, CMOS-compatible material.
Superconducting qubit based on superconducting circuits consist of a superconducting capacitor and a Josephson junction with the transmon geometry is extensively used in advanced quantum processors, pursuing scalable quantum computing. The tuning of the qubit frequency of the transmon relies on magnetic flux-dependent interference between the supercurrents of two superconductor-insulator-superconductor (S-I-S) Josephson junctions in a superconducting loop. Josephson junction based on superconductor-semiconductor-superconductor (S-Sm-S) materials opens up a possibility to the gate-tunable transmon, referred to as the "gatemon", in which the qubit frequency can be tuned by electrostatic mean. Recent realizations of gatemons on III-V material platforms show impressive development on the alternative to the transmon, yet still leave a big question on the scalability. The silicon-germanium (SiGe) heterostructure is one of the potential platforms to host hybrid devices due to its high hole mobility and the low Schottky barrier at the Ge-metal interface. Additionally, the compatibility with the silicon-based semiconductor industry is a capable advantage for the scaling-up qubit platform.In this thesis, we develop gatemons based on the Al-Ge-Al Josephson junction in the SiGe heterostructure. Firstly, the robust fabrication recipe, found on a top-down approach, for Josephson Field Effect Transistors (JoFETs) is established. We perform measurements exhaustively on the JoFETs to study their properties as a function of the gate voltage, temperature, and magnetic field. The devices show gate-tunability of the critical current and the normal state resistance . The devices are estimated to have a high-transparency superconductor-semiconductor interface, as demonstrated by the high product on the SiGe heterostructure. In the finite-voltage regime, the features corresponded to multiple Andreev reflections (MARs) are observed. Then, we fabricate and characterize niobium nitride (NbN) superconducting resonators on SiGe heterostructure. We measure the resonators in the transmission mode and extract the resonant frequency , internal quality factor, and coupling quality factor from the transmission coefficient. Following that, we develop the fabrication process to integrate Al-Ge-Al junctions shunted with capacitors, or, in other words, gatemon, into the resonator scheme and perform the fabrication according to the design. We demonstrate the anticrossing feature in one of the fabricated gatemons. The resonant frequency of the gatemon is mapped using the two-tone spectroscopy technique and is found to be gate-tunable. The qubit has large spectral linewidth, implying a low coherence time. Additionally, we conduct the current-phase relationship (CPR) measurement on the junctions in the Superconducting QUantum Interference Device (SQUID) geometry. We can demonstrate that the junctions pose non-sinusoidal CPR. Further, the integer and half-integer Shapiro steps are observed in the current-voltage characteristic curves of irradiated junctions. This indicates that our junctions have the element, which can open up another possibility toward protected qubits.
We construct a series of graphene-based superconducting quantum circuits and integrate them into 3D cavities. For a single-qubit device, we demonstrate flux-tunable qubit transition, with a measured T1≈ 48 ns and a lower bound estimate of T2∗≈ 17.63 ns. By coupling the device to cavities with different resonant frequencies, we access multiple qubit-cavity coupling regimes, enabling the observation of vacuum Rabi splitting and flux-dependent spectral linewidths. In a two-qubit device consisting of a SQUID and a single junction, power-dependent measurements reveal a two-stage dispersive shift. By flux-tuning the cavity frequency at different readout powers, we attribute the first shift to the fixed-qubit and the second to the SQUID-qubit, indicating successful coupling between the two circuits and a single cavity mode. Our study demonstrates the flexible coupling achievable between 2D-material-based superconducting circuits and 3D cavities, and paves the way toward constructing multi-qubit 3D transmon devices from 2D materials.
Superconducting qubit based on superconducting circuits consist of a superconducting capacitor and a Josephson junction with the transmon geometry is extensively used in advanced quantum processors, pursuing scalable quantum computing. The tuning of the qubit frequency of the transmon relies on magnetic flux dependent interference between the supercurrents of two superconductor-insulator superconductor(S-I-S) Josephson junctions in a superconducting loop. Josephson junction based on superconductor-semiconductor-superconductor (S-Sm-S) materialsopens up a possibility to the gate-tunable transmon, referred to as the "gatemon", in which the qubit frequency can be tuned by electrostatic mean. Recent realizations of gatemons on III-V material platforms show impressive development on the alternative to the transmon, yet still leave a big question on the scalability. The silicon-germanium (SiGe) heterostructure is one of the potential platforms to host hybrid devices due to its high hole mobility and the low Schottky barrier at the Ge-metal interface. Additionally, the compatibility with the silicon-based semiconductor industry is a capable advantage for the scaling-up qubit platform.In this thesis, we develop gatemons based on the Al-Ge-Al Josephson junction in the SiGe heterostructure. Firstly, the robust fabrication recipe, found on a top down approach, for Josephson Field Effect Transistors (JoFETs) is established. We perform measurements exhaustively on the JoFETs to study their properties as a function of the gate voltage, temperature, and magnetic field. The devices show gate-tunability of the critical current (IC) and the normal state resistance (RN). The devices are estimated to have a high-transparency superconductor/semiconductor interface, as demonstrated by the high ICRN product on the SiGe heterostructure. In the finite-voltage regime, the features corresponded to multiple Andreev reflections (MARs) are observed. Then, we fabricate and characterize niobium nitride (NbN) superconducting resonators on SiGe heterostructure. We measure the resonators in the transmission mode and extract the resonant frequency (fr), internal quality factor (Qi), and coupling quality factor (Qc) from the transmission coefficient (S21). Following that, we develop the fabrication process to integrate Al-Ge-Al junctions shunted with capacitors, or, in other words,gatemon, into the resonator scheme and perform the fabrication according to the design. We demonstrate the anticrossing feature in one of the fabricated gatemons. The resonant frequency of the gatemon is mapped using the two-tone spectroscopy technique and is found to be gate-tunable. The qubit has large spectral linewidth, implying a low coherence time. Additionally, we conduct the current-phase relationship (CPR) measurement on the junctions in the Superconducting QUantum Interference Device (SQUID) geometry. We can demonstrate that the junctions pose non-sinusoidal CPR. Further, the integer and half-integer Shapiro steps are observed in the current-voltage characteristic curves of irradiated junctions. This indicates that our junctions have the cos 2φ element, which can open up another possibility toward protected qubits.
Quantum computing based on superconducting qubits requires the understanding and control of the materials, device architecture, and operation. However, the materials for the central circuit element, the Josephson junction, have mostly been focused on using the AlO x tunnel barrier. Here, we demonstrate Josephson junctions and superconducting qubits employing two-dimensional materials as the tunnel barrier. We batch-fabricate and design the critical Josephson current of these devices via layer-by-layer stacking N layers of MoS 2 on the large scale. Based on such junctions, MoS 2 transmon qubits are engineered and characterized in a bulk superconducting microwave resonator for the first time. Our work allows Josephson junctions to access the diverse material properties of two-dimensional materials that include a wide range of electrical and magnetic properties, which can be used to study the effects of different material properties in superconducting qubits and to engineer novel quantum circuit elements in the future.