Integrating two-dimensional (2D) materials into circuit quantum electrodynamics (cQED) devices is an emerging field in recent years. This integration not only facilitates the exploration of potential applications in quantum information processing but also enables the study of material's fundamental properties using microwave techniques. While most studies employ 2D coplanar architectures with scalability potential, three-dimensional (3D) cavity-based cQED devices, due to their simpler design, offer the advantage of a quicker turnaround to probe the composite Josephson junctions (JJs). Here, we construct the first flux-tunable, 3D cavity-compatible superconducting quantum circuit based on 2D materials, featuring a graphene superconducting quantum interference device (SQUID) shunted by a capacitor that is accessible by both dc and microwave probes. We have shown how flux-modulated cavity frequency can be linked to the SQUID critical current under the influence of Fraunhofer's pattern. In addition, we extracted the symmetry information of the SQUIDs based on dc analysis, and correlated this with the flux-modulated cavity frequency observed in microwave measurements. Our platform can extend to topological materials, holding the prospect of establishing valid topological JJs with a dc probe while allowing a fast microwave probe to avoid quasiparticle poisoning.
Integrating two-dimensional (2D) materials into circuit quantum electrodynamics (cQED) devices is an emerging field in recent years. This integration not only facilitates the exploration of potential applications in quantum information processing but also enables the study of material's fundamental properties using microwave techniques. While most studies employ 2D coplanar architectures with scalability potential, three-dimensional (3D) cavity-based cQED devices, due to their simpler design, offer the advantage of a quicker turnaround to probe the composite Josephson junctions (JJs). Here, we construct the first flux-tunable, 3D cavity-compatible superconducting quantum circuit based on 2D materials, featuring a graphene superconducting quantum interference device (SQUID) shunted by a capacitor that is accessible by both dc and microwave probes. We have shown how flux-modulated cavity frequency can be linked to the SQUID critical current under the influence of Fraunhofer's pattern. In addition, we extracted the symmetry information of the SQUIDs based on dc analysis, and correlated this with the flux-modulated cavity frequency observed in microwave measurements. Our platform can extend to topological materials, holding the prospect of establishing valid topological JJs with a dc probe while allowing a fast microwave probe to avoid quasiparticle poisoning.
Josephson junctions (JJ) are a fundamental component of microwave quantum circuits, such as tunable cavities, qubits, and parametric amplifiers. Recently developed encapsulated graphene JJs, with supercurrents extending over micron distance scales, have exciting potential applications as a new building block for quantum circuits. Despite this, the microwave performance of this technology has not been explored. Here, we demonstrate a microwave circuit based on a ballistic graphene JJ embedded in a superconducting cavity. We directly observe a gate-tunable Josephson inductance through the resonance frequency of the device and, using a detailed RF model, we extract this inductance quantitatively. We also observe the microwave losses of the device, and translate this into sub-gap resistances of the junction at μeV energy scales, not accessible in DC measurements. The microwave performance we observe here suggests that graphene Josephson junctions are a feasible platform for implementing coherent quantum circuits.
We construct a series of graphene-based superconducting quantum circuits and integrate them into 3D cavities. For a single-qubit device, we demonstrate flux-tunable qubit transition, with a measured T1≈ 48 ns and a lower bound estimate of T2∗≈ 17.63 ns. By coupling the device to cavities with different resonant frequencies, we access multiple qubit-cavity coupling regimes, enabling the observation of vacuum Rabi splitting and flux-dependent spectral linewidths. In a two-qubit device consisting of a SQUID and a single junction, power-dependent measurements reveal a two-stage dispersive shift. By flux-tuning the cavity frequency at different readout powers, we attribute the first shift to the fixed-qubit and the second to the SQUID-qubit, indicating successful coupling between the two circuits and a single cavity mode. Our study demonstrates the flexible coupling achievable between 2D-material-based superconducting circuits and 3D cavities, and paves the way toward constructing multi-qubit 3D transmon devices from 2D materials.
Semiconductor-based superconducting qubits offer a versatile platform for studying hybrid quantum devices in circuit quantum electrodynamics (QED) architecture. Most of these circuit QED experiments utilize coplanar waveguides, where the incorporation of dc gate lines is straightforward. Here, we present a technique for probing gate-tunable hybrid devices using a three-dimensional (3D) microwave cavity. A recess is machined inside the cavity wall for the placement of devices and gate lines. We validate this design using a hybrid device based on an InAs-Al nanowire Josephson junction. The coupling between the device and the cavity is facilitated by a long superconducting strip, the antenna. The Josephson junction and the antenna together form a gatemon qubit. We further demonstrate the gate-tunable cavity shift and two-tone qubit spectroscopy. This technique could be used to probe various quantum devices and materials in a 3D circuit QED architecture that requires dc gate voltages.
This thesis investigates fundamental properties of Josephson junctions embedded in microwave circuits, and an application arising from this hybrid approach. We used the versatility of superconducting coplanar DC bias cavities to extract previously inaccessible information on phase coherent and subgap mechanisms of graphene Josephson junctions. Chapter 1 gives an introduction to the technology of Josephson field effect transistors, among which graphene junctions show promise for future improvements in quantum computation. Together with an overview of the Josephson effect in superconducting-semiconducting systems, we introduce the concept of coplanar DC bias cavities for probing Josephson junctions at gigahertz frequencies. In chapter 2, we describe the experimental methods developed for carrying out the subsequent measurements. We include details on fabrication, material properties and measurement setup. Results of graphene Josephson junctions embedded in DC bias microwave resonators are presented in chapters 3 and 4. By following the resonance frequency and losses of the circuit, we are able to extract the junctions’ Josephson inductance and subgap resistance. Studying the nonlinear power and bias current response reveals further information on the underlying loss mechanisms and current phase relation. We turn to an application of our hybrid bias cavity – Josephson junction devices to detect small, low-frequency currents in chapter 5. Our device is competitive with state-of-the-art techniques for microwave radiation detection and, with minor modifications, should be able to outperform existing technologies by orders of magnitude. Finally, we conclude the presented work in chapter 6 and provide an outlook on potential future research.
Josephson junctions (JJ) and their tunable properties, including their nonlinearities, form the core of superconducting circuit quantum electrodynamics (cQED). In quantum circuits, low-noise amplification of feeble microwave signals is essential and the Josephson parametric amplifiers (JPA) are the widely used devices. The existing JPAs are based on Al-AlOx-Al tunnel junctions realized in a superconducting quantum interference device geometry, where magnetic flux is the knob for tuning the frequency. Recent experimental realizations of 2D van der Waals JJs provide an opportunity to implement various cQED devices with the added advantage of tuning the junction properties and the operating point using a gate potential. While other components of a possible 2D van der Waals cQED architecture have been demonstrated -- quantum noise limited amplifier, an essential component, has not been realized. Here we implement a quantum noise limited JPA, using a graphene JJ, that has linear resonance gate tunability of 3.5 GHz. We report 24 dB amplification with 10 MHz bandwidth and -130 dBm saturation power; performance on par with the best single-junction JPAs. Importantly, our gate tunable JPA works in the quantum-limited noise regime which makes it an attractive option for highly sensitive signal processing. Our work has implications for novel bolometers -- the low heat capacity of graphene together with JJ nonlinearity can result in an extremely sensitive microwave bolometer embedded inside a quantum noise-limited amplifier. In general, our work will open up exploration of scalable device architecture of 2D van der Waals materials by integrating a sensor with the quantum amplifier.
Abstract In this perspective article, we review the current state of research on integrating quantum materials (QMs) into superconducting quantum devices. We begin with the role of QMs as weak links in Josephson junctions, enabling gate- and flux-tunable transmons. We then explore their application in more complex superconducting circuits, such as gate-tunable fluxonium qubits, or gatemonium, which provide additional control over qubit parameters. We also discuss QM-based vertical junctions and their potential for creating merged-element transmons. Further, we highlight QMs’ role in topological superconducting circuits, where they facilitate the study of Majorana zero modes through signatures such as 4π-periodic supercurrents. Additionally, we review the integration of QMs into 3D cavity architectures and discuss how they differ from their 2D counterparts. Beyond weak links, we examine the use of 2D superconducting and insulating materials, such as NbSe2 and hBN, in parallel-plate capacitors, offering a compact alternative to conventional large-footprint transmon capacitors. Finally, we outline the current challenges and future directions for exploration.