Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Photonics Research

Free-space interferometer design for optical frequency dissemination and out-of-loop characterization below the 10 −21 -level

Thomas Jürß, Gesine Grosche, Sebastian Koke

Published Apr 21, 2023• 6 citations
Publisher

Abstract

For improving the performance of optical frequency dissemination and the resolution of its out-of-loop (OOL) characterization, we investigate a compact free-space interferometer design in which a monolithic assembly forms the reference arm. Two interferometer designs are realized, and their environmental sensitivity is analyzed based on the properties of the materials involved. We elucidate that in these designs the temperature sensitivities of the out-of-loop signal paths are greater than for the reference arm. As the estimated temperature-variation-induced frequency transfer errors are observed to be the relevant limitation, the out-of-loop characterization signal can be regarded as a trustworthy upper limit of the frequency transfer error to a remote place. We demonstrate a fractional frequency transfer uncertainty and OOL characterization resolution of ≤2.7×10 −21 over many measurement runs. With a value of (0.23±1.07)×10 −22 the weighted mean offset is significantly below the best reported results so far.

DOI
10.1364/prj.485899

Related papers

Generation of multiple optical frequencies referenced to a frequency comb for precision free-space frequency transfer

Byung Jae Chun, Hyun Jay Kang, Young‐Jin Kim +1 more

Generating multiple optical frequencies referenced to the frequency standard is an important task in optical clock dissemination and optical communication. An apparatus for frequency-comb-referenced generation of multiple optical frequencies is demonstrated for high-precision free-space transfer of multiple optical frequencies. The relative linewidth and frequency instability at each channel corresponds to sub-1 Hz and 1.06×10-15 at 10 s averaging time, respectively. During the free-space transfer, the refractive index change of transmission media caused by atmospheric turbulences induces phase and frequency noise on optical frequencies. These phase and frequency noise causes induced linewidth broadening and frequency shift in optical frequencies which can disturb the accurate frequency transfer. The proposed feedback loop with acousto-optic modulator can monitor and compensate phase/frequency noise on optical frequencies. As a result, a frequency-comb-referenced single optical mode is compensated with a high signal to noise ratio (SNR) of 80 dB. By sharing the same optical paths, this feedback loop is confirmed to be successfully transferred to the neighboring wavelength channels (a 100 GHz spaced channel). This result confirms our proposed system can transfer optical frequencies to the remote site in free-space without performance degradation.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Mar 15, 2016•1 citation

Towards Drift-Free Frequency Transfer Over Fiber Baseline for Optical Very-Long-Baseline-Interferometry

Tess R. Ekblad

Optical very-long-baseline-interferometry (VLBI) aims to increase angular resolution capabilities beyond those of the radio regime and enable advanced spectroscopic performance. VLBI requires a distributed network of coherence to properly synthesize the apertures together. Fiber optics have revolutionized precision frequency-and-time transfer for applications such as communication, ranging, and timing and offer a platform for distributing coherent optical references for VLBI. However, signals transmitted through optical fibers are subject to the noise environment in which the fiber is laid. This is particularly problematic for precision optical frequency transfer over long distances and for precision timing across large baselines for applications such as VLBI. To combat the added phase noise due to fiber-piston action and refractive index changes in optical fibers, a phase cancellation method is required. In this thesis, we detail the evolution of a one-way optical frequency stabilization technique to increase the stability by limiting the out-of-loop path in a traditional phase-tracking heterodyne interferometer. Each apparatus’s stability was first tested over a 4.09 km SMF-28 fiber spool. The second and third apparatus iterations were individually deployed over a telecom SMF-28 fiber link of 2923 m in round-trip length. The final evolution involved a custom micro-optic component to reduce the out-of-loop to 1.4 cm and achieved in-loop instability of 4x10-19 at 1 ks and a worst-case out-of-loop timing-jitter below 200 attoseconds for up to 1 ks over the telecom link. The performance of the final apparatus is more than sufficient to distribute a coherent optical reference to perform distributed thermal heterodyne measurements.

•Mar 11, 2026•0 citations

Robust Transfer of Optical Frequency over 500km Fiber Link with Instability of 10−21

Qian Zhou, Xiang Zhang, Qi Zang +6 more

Abstract Our primary objective is to mitigate the adverse effects of temperature fluctuations on the optical frequency transmission system by reducing the length of the interferometer. Following optimization, the phase-temperature coefficient of the optical system is reduced to approximately 1.35 fs/K. By applying a sophisticated temperature control to the remained “out-of-loop” optics fiber, the noise floor of the system has been effectively lowered to 10−21 level. Based on this performance-enhanced transfer system, we demonstrate coherent transmission of optical frequency through 500-km spooled fiber link. After being actively compensated, the transfer instability of 4.5 × 10−16 at the averaging time of 1 s and 5.6 × 10−21 at 10000 s is demonstrated. The frequency uncertainty of received light at remote site relative to that of the origin light at local site is achieved to be 1.15 × 10−19. This enhanced system configuration is particularly well suited for future long-distance frequency transmission and comparison of the most advanced optical clock signals.

Chinese Physics Letters•Jul 25, 2024•7 citations

Multi-node optical frequency dissemination with post automatic phase correction

Liang Hu, Xueyang Tian, Guiling Wu +3 more

We report a technique for coherence transfer of laser light through a fiber link, where the optical phase noise induced by environmental perturbations via the fiber link is compensated by remote users with passive phase noise correction, rather than at the local site as is conventional. Neither phase discrimination nor active phase tracking is required due to the open-loop design, mitigating some technical problems such as the limited compensation speed and the finite compensation precision as conventional active phase noise cancellation. We theoretically analyze and experimentally demonstrate that the delay-limited residual fiber phase noise after phase noise compensation is a factor of seven higher than the conventional techniques. Using this technique, we demonstrate the transfer laser light through a 145-km-long, lab-based spooled fiber. After being compensated, a relative frequency instability is 1.9 × 10-15at the integration time of 1 s and scales down to the level of 10-18-range at 10,000 s. The frequency uncertainty of the light after transferring through the fiber relative to that of the input light is (-0.36 ± 2.6) × 10-18. As the transmitted optical signal remains unaltered until it reaches the remote sites, it can be transmitted simultaneously to multiple remote sites on an arbitrarily complex fiber network, paving a way to develop a multi-node optical frequency dissemination system with post automatic phase noise correction for a number of end-users.

arXiv:2001.05712•Journal of Lightwave Technology•Jan 1, 2020•24 citations

Optical frequency transfer with below 10−21 uncertainty using a DFB–laser-based fiber Brillouin amplifier

Jaffar Emad Kadum, Jingxian Ji, Alexander Kühl +3 more

Exploiting the outstanding performance of optical atomic clocks for improved timekeeping, relativistic geodesy, and fundamental physics beyond the standard model demands comparing distant state-of-the-art optical clocks. Interferometric optical fiber links have been demonstrated as an eminent method for such frequency comparisons over distances up to thousands of kilometers. However, for such distances, the optical fiber attenuation mandates signal amplification. Fiber Brillouin amplification (FBA) has been proven as an efficient amplification technique for coherent frequency transfer. Demonstrated FBA schemes have been designed based on costly narrow-linewidth pump lasers and analog pump-to-signal phase locking schemes. Furthermore, the high pump power requirement of these FBAs hinders the integration of FBA-based frequency dissemination on fiber connections for shared telecommunication signals in the C-band. In this paper, we propose and experimentally demonstrate a novel FBA module (FBAM) employing cost-effective distributed feedback (DFB) pump lasers assisted by a digital phase locking scheme based on a field programmable gated array. The new FBAM is compact, cost-effective, and directly applicable to different bands, which opens up new opportunities to establish a frequency metrology infrastructure within existing telecommunication fiber networks. Additionally, the small-footprint of the DFB-FBAM allows for frequent amplification stages with lower pump power to reach continental scale optical metrology links with an optimized signal-to-noise ratio. We characterized the DFB-FBAM’s frequency transfer uncertainty using a two-way layout over an in-lab 100 km long optical fiber link and reach a fractional frequency instability of 9.3 × 10−22 at a 10 ks integration time. The DFB-FBAM characterizations show uncertainty contributions of (−2.1 ± 3.3) × 10−22 and below for averaging times >100 ks. For the first time, we assess the temporal Brillouin frequency shift variations in an underground fiber link and implement a scheme to track these changes in a remote FBAM.

APL Photonics•Mar 1, 2023•7 citations

Hybrid Fiber-Optic Time-Frequency Transfer for Enhanced Long-Term Frequency Stability

Libo Li, Lina Bai, Kan Zhao +3 more

Coherent Doppler noise cancellation is a cornerstone technique for the high-fidelity dissemination of optical frequency references. However, conventional implementations exhibit an inherent asymmetry by employing offset optical frequencies at the remote end to separate parasitic reflections from the return signal in a round-trip configuration. This asymmetry induces a residual phase error that accumulates with variations in the link propagation delay, fundamentally limiting the long-term frequency stability. We present a hybrid time-frequency transfer scheme that simultaneously disseminates a timing signal to probe the link delay and actively correct this asymmetry-induced error. Experimentally, we validate the method over a 300 km fiber spool subjected to a 7 °C temperature change, inducing a round trip link delay variation of 92.2 ns. With real-time monitoring and active compensation, the optical frequency instability is reduced from 2.1 × 10-19to 1.3 × 10-20at 30000 s averaging—an order-of-magnitude improvement. Simultaneously, the time transfer achieves 1.2 ps stability over the same period. This approach enables simultaneous high-precision time and frequency dissemination over long-haul fiber links with enhanced environmental immunity, establishing a practical pathway toward next-generation phase-stabilized fiber networks.

Journal of Lightwave Technology•Jan 1, 2026•0 citations
For improving the performance of optical frequency dissemination and the resolution of its out-of-loop (OOL) characterization, we investigate a compact free-space interferometer design in which a monolithic assembly forms the reference arm. Two interferometer designs are realized, and their environmental sensitivity is analyzed based on the properties of the materials involved. We elucidate that in these designs the temperature sensitivities of the out-of-loop signal paths are greater than for the reference arm. As the estimated temperature-variation-induced frequency transfer errors are observed to be the relevant limitation, the out-of-loop characterization signal can be regarded as a trustworthy upper limit of the frequency transfer error to a remote place. We demonstrate a fractional frequency transfer uncertainty and OOL characterization resolution of ≤2.7×10 −21 over many measurement runs. With a value of (0.23±1.07)×10 −22 the weighted mean offset is significantly below the best reported results so far.
Generating multiple optical frequencies referenced to the frequency standard is an important task in optical clock dissemination and optical communication. An apparatus for frequency-comb-referenced generation of multiple optical frequencies is demonstrated for high-precision free-space transfer of multiple optical frequencies. The relative linewidth and frequency instability at each channel corresponds to sub-1 Hz and 1.06×10-15 at 10 s averaging time, respectively. During the free-space transfer, the refractive index change of transmission media caused by atmospheric turbulences induces phase and frequency noise on optical frequencies. These phase and frequency noise causes induced linewidth broadening and frequency shift in optical frequencies which can disturb the accurate frequency transfer. The proposed feedback loop with acousto-optic modulator can monitor and compensate phase/frequency noise on optical frequencies. As a result, a frequency-comb-referenced single optical mode is compensated with a high signal to noise ratio (SNR) of 80 dB. By sharing the same optical paths, this feedback loop is confirmed to be successfully transferred to the neighboring wavelength channels (a 100 GHz spaced channel). This result confirms our proposed system can transfer optical frequencies to the remote site in free-space without performance degradation.
Optical very-long-baseline-interferometry (VLBI) aims to increase angular resolution capabilities beyond those of the radio regime and enable advanced spectroscopic performance. VLBI requires a distributed network of coherence to properly synthesize the apertures together. Fiber optics have revolutionized precision frequency-and-time transfer for applications such as communication, ranging, and timing and offer a platform for distributing coherent optical references for VLBI. However, signals transmitted through optical fibers are subject to the noise environment in which the fiber is laid. This is particularly problematic for precision optical frequency transfer over long distances and for precision timing across large baselines for applications such as VLBI. To combat the added phase noise due to fiber-piston action and refractive index changes in optical fibers, a phase cancellation method is required. In this thesis, we detail the evolution of a one-way optical frequency stabilization technique to increase the stability by limiting the out-of-loop path in a traditional phase-tracking heterodyne interferometer. Each apparatus’s stability was first tested over a 4.09 km SMF-28 fiber spool. The second and third apparatus iterations were individually deployed over a telecom SMF-28 fiber link of 2923 m in round-trip length. The final evolution involved a custom micro-optic component to reduce the out-of-loop to 1.4 cm and achieved in-loop instability of 4x10-19 at 1 ks and a worst-case out-of-loop timing-jitter below 200 attoseconds for up to 1 ks over the telecom link. The performance of the final apparatus is more than sufficient to distribute a coherent optical reference to perform distributed thermal heterodyne measurements.
Abstract Our primary objective is to mitigate the adverse effects of temperature fluctuations on the optical frequency transmission system by reducing the length of the interferometer. Following optimization, the phase-temperature coefficient of the optical system is reduced to approximately 1.35 fs/K. By applying a sophisticated temperature control to the remained “out-of-loop” optics fiber, the noise floor of the system has been effectively lowered to 10−21 level. Based on this performance-enhanced transfer system, we demonstrate coherent transmission of optical frequency through 500-km spooled fiber link. After being actively compensated, the transfer instability of 4.5 × 10−16 at the averaging time of 1 s and 5.6 × 10−21 at 10000 s is demonstrated. The frequency uncertainty of received light at remote site relative to that of the origin light at local site is achieved to be 1.15 × 10−19. This enhanced system configuration is particularly well suited for future long-distance frequency transmission and comparison of the most advanced optical clock signals.
We report a technique for coherence transfer of laser light through a fiber link, where the optical phase noise induced by environmental perturbations via the fiber link is compensated by remote users with passive phase noise correction, rather than at the local site as is conventional. Neither phase discrimination nor active phase tracking is required due to the open-loop design, mitigating some technical problems such as the limited compensation speed and the finite compensation precision as conventional active phase noise cancellation. We theoretically analyze and experimentally demonstrate that the delay-limited residual fiber phase noise after phase noise compensation is a factor of seven higher than the conventional techniques. Using this technique, we demonstrate the transfer laser light through a 145-km-long, lab-based spooled fiber. After being compensated, a relative frequency instability is 1.9 × 10-15at the integration time of 1 s and scales down to the level of 10-18-range at 10,000 s. The frequency uncertainty of the light after transferring through the fiber relative to that of the input light is (-0.36 ± 2.6) × 10-18. As the transmitted optical signal remains unaltered until it reaches the remote sites, it can be transmitted simultaneously to multiple remote sites on an arbitrarily complex fiber network, paving a way to develop a multi-node optical frequency dissemination system with post automatic phase noise correction for a number of end-users.
Exploiting the outstanding performance of optical atomic clocks for improved timekeeping, relativistic geodesy, and fundamental physics beyond the standard model demands comparing distant state-of-the-art optical clocks. Interferometric optical fiber links have been demonstrated as an eminent method for such frequency comparisons over distances up to thousands of kilometers. However, for such distances, the optical fiber attenuation mandates signal amplification. Fiber Brillouin amplification (FBA) has been proven as an efficient amplification technique for coherent frequency transfer. Demonstrated FBA schemes have been designed based on costly narrow-linewidth pump lasers and analog pump-to-signal phase locking schemes. Furthermore, the high pump power requirement of these FBAs hinders the integration of FBA-based frequency dissemination on fiber connections for shared telecommunication signals in the C-band. In this paper, we propose and experimentally demonstrate a novel FBA module (FBAM) employing cost-effective distributed feedback (DFB) pump lasers assisted by a digital phase locking scheme based on a field programmable gated array. The new FBAM is compact, cost-effective, and directly applicable to different bands, which opens up new opportunities to establish a frequency metrology infrastructure within existing telecommunication fiber networks. Additionally, the small-footprint of the DFB-FBAM allows for frequent amplification stages with lower pump power to reach continental scale optical metrology links with an optimized signal-to-noise ratio. We characterized the DFB-FBAM’s frequency transfer uncertainty using a two-way layout over an in-lab 100 km long optical fiber link and reach a fractional frequency instability of 9.3 × 10−22 at a 10 ks integration time. The DFB-FBAM characterizations show uncertainty contributions of (−2.1 ± 3.3) × 10−22 and below for averaging times >100 ks. For the first time, we assess the temporal Brillouin frequency shift variations in an underground fiber link and implement a scheme to track these changes in a remote FBAM.
Coherent Doppler noise cancellation is a cornerstone technique for the high-fidelity dissemination of optical frequency references. However, conventional implementations exhibit an inherent asymmetry by employing offset optical frequencies at the remote end to separate parasitic reflections from the return signal in a round-trip configuration. This asymmetry induces a residual phase error that accumulates with variations in the link propagation delay, fundamentally limiting the long-term frequency stability. We present a hybrid time-frequency transfer scheme that simultaneously disseminates a timing signal to probe the link delay and actively correct this asymmetry-induced error. Experimentally, we validate the method over a 300 km fiber spool subjected to a 7 °C temperature change, inducing a round trip link delay variation of 92.2 ns. With real-time monitoring and active compensation, the optical frequency instability is reduced from 2.1 × 10-19to 1.3 × 10-20at 30000 s averaging—an order-of-magnitude improvement. Simultaneously, the time transfer achieves 1.2 ps stability over the same period. This approach enables simultaneous high-precision time and frequency dissemination over long-haul fiber links with enhanced environmental immunity, establishing a practical pathway toward next-generation phase-stabilized fiber networks.