Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2001.05712 · Journal of Lightwave Technology

Multi-node optical frequency dissemination with post automatic phase correction

Liang Hu, Xueyang Tian, Guiling Wu, Mengya Kong, Jianguo Shen, Jianping Chen

Published Jan 1, 2020• 24 citations
arXivHTMLPDF

Abstract

We report a technique for coherence transfer of laser light through a fiber link, where the optical phase noise induced by environmental perturbations via the fiber link is compensated by remote users with passive phase noise correction, rather than at the local site as is conventional. Neither phase discrimination nor active phase tracking is required due to the open-loop design, mitigating some technical problems such as the limited compensation speed and the finite compensation precision as conventional active phase noise cancellation. We theoretically analyze and experimentally demonstrate that the delay-limited residual fiber phase noise after phase noise compensation is a factor of seven higher than the conventional techniques. Using this technique, we demonstrate the transfer laser light through a 145-km-long, lab-based spooled fiber. After being compensated, a relative frequency instability is 1.9 × 10-15at the integration time of 1 s and scales down to the level of 10-18-range at 10,000 s. The frequency uncertainty of the light after transferring through the fiber relative to that of the input light is (-0.36 ± 2.6) × 10-18. As the transmitted optical signal remains unaltered until it reaches the remote sites, it can be transmitted simultaneously to multiple remote sites on an arbitrarily complex fiber network, paving a way to develop a multi-node optical frequency dissemination system with post automatic phase noise correction for a number of end-users.

DOI
10.1109/jlt.2020.2976167

Related papers

Branching Optical Frequency Transfer With Enhanced Post Automatic Phase Noise Cancellation

Ruimin Xue, Liang Hu, Jianguo Shen +2 more

We present a technique for coherence transfer of laser light through a branching fiber link, where the optical phase noise induced by environmental perturbations via the fiber link is passively compensated by remote users without the requirements of any active servo components. At each remote site, an acousto-optic modulator (AOM) is simultaneously taken as a frequency distinguisher for distinguishing its unique frequency from other sites' and as an optical actuator for compensating the phase noise coming from the optical fiber. With this configuration, we incorporate a long outside loop path consisting of a fiber-pigtailed AOM into the loop, enabling the significant reduction of the outside loop phase noise in the passive way. To further address the residual out-of-loop phase noise coming from the interferometer and the two-way optical frequency comparison setup, we design a low-noise active temperature stabilization system. Measurements with a back-to-back system show that the stability in our stabilization system is 2×10-16at 1 s, reaching 2×10-20after 10,000s. Adopting these techniques, we demonstrate transfer of a laser light through a branching fiber network with 50 km and 145 km two fiber links. After being compensated for the 145 km fiber link, the relative frequency instability is 3.4×10-15at the 1 s averaging time and scales down to 3.7×10-19at the 10,000 s averaging time. This proposed technique is suitable for the simultaneous transfer of an optical signal to a number of independent users within a local area.

arXiv:2104.13477•Journal of Lightwave Technology•Apr 28, 2021•18 citations

Coherence transfer of subhertz-linewidth laser light via an optical fiber noise compensated by remote users

Lifei Wu, Yanyi Jiang, Chaoqun Ma +3 more

We present a technique for the coherence transfer of laser light through a fiber link, where the optical phase noise induced by environmental perturbation via the fiber link is compensated by remote users. When compensating the fiber noise by remote users, the time base at the remote site independent from that at the local site does not destroy the performance of the fiber output light. Using this technique, we demonstrate the transfer of subhertz-linewidth laser light through a 25-km-long, lab-based spooled fiber. After being compensated, the relative linewidth between the fiber input and output light is 1 mHz, and the relative frequency instability is 4×10−17 at 1 s averaging time and scales down to 2×10−19 at 800 s averaging time. The frequency uncertainty of the light after transferring through the fiber relative to that of the input light is 3.0×10−19. This system is suitable for the simultaneous transfer of an optical signal to a number of end users within a city.

Optics Letters•Sep 13, 2016•19 citations

Optical frequency transfer link with remote site compensation

Qi Zang, Xiang Zhang, Xue Deng +9 more

In this paper, we present a remote time-base-free technique for a coherent optical frequency transfer system via fiber.At the remote site, the thermal noise of the optical components is corrected along with the link phase noise caused by environmental effects.In this system, a 1 × 2 acousto-optic modulator (AOM) is applied at the remote site, with the first light being used to eliminate the noise of the remote time base and interface with remote users while the zeroth light is used to establish an active noise canceling loop.With this technique, a 10 MHz commercial oscillator, used as a time base at the remote site, does not contribute to the noise of the transferred signal.An experimental system is constructed using a 150 km fiber spool to validate the proposed technique.After compensation, the overlapping Allan deviation of the transfer link is 7.42 × 10 -15 at 1 s integration time and scales down to 1.07 × 10 -18 at 10,000 s integration time.The uncertainty of the transmitted optical frequency is on the order of a few 10 -19 .This significantly reduces the time-base requirements and costs for multi-user applications without compromising transfer accuracy.Meanwhile, these results show great potential for transferring ultra-stable optical frequency signals to remote sites, especially for point-to-multi-users.

Chinese Optics Letters•Jan 1, 2024•2 citations

Coherent optical frequency transfer via 972-km fiber link

Xue 雪 Deng 邓, Xiang 翔 Zhang 张, Qi 琦 Zang 臧 +8 more

We demonstrate coherent optical frequency dissemination over a distance of 972 km by cascading two spans where the phase noise is passively compensated for. Instead of employing a phase discriminator and a phase locking loop in the conventional active phase control scheme, the passive phase noise cancellation is realized by feeding double-trip beat-note frequency to the driver of the acoustic optical modulator at the local site. This passive scheme exhibits fine robustness and reliability, making it suitable for long-distance and noisy fiber links. An optical regeneration station is used in the link for signal amplification and cascaded transmission. The phase noise cancellation and transfer instability of the 972-km link is investigated, and transfer instability of 1.1 × 10−19 at 104 s is achieved. This work provides a promising method for realizing optical frequency distribution over thousands of kilometers by using fiber links.

Chinese Physics B•Oct 24, 2023•8 citations

Multi-access fiber-optic radio frequency transfer with passive phase noise compensation

Hongwei Li, Guiling Wu, Jiapeng Zhang +2 more

In this Letter, we propose and demonstrate a multi-access fiber-optic radio frequency dissemination with passive phase noise cancelation. A forward phase-conjugated signal is generated at the local site by frequency mixing between the standard signal and the round-trip probe signal. A stable frequency signal is achieved by frequency mixing the tapped forward phase-conjugated signal and the backward probe signal at an arbitrary point along the fiber link. Different wavelengths for forward and backward directions are employed to efficiently suppress the effect of backscattering. At the same time, the increase of bidirectional asymmetry with the increase of user ends is avoided by employing the same wavelengths for all user ends. A multi-access frequency transfer over a 45 km fiber link based on the proposed scheme is demonstrated. The radio frequency signals with relative frequency stabilities of 10−17/20,000 s level are reproduced at two points of 5 and 40 km far from the local site along the fiber link, respectively.

Optics Letters•Dec 1, 2016•28 citations

Robust Transfer of Optical Frequency over 500km Fiber Link with Instability of 10−21

Qian Zhou, Xiang Zhang, Qi Zang +6 more

Abstract Our primary objective is to mitigate the adverse effects of temperature fluctuations on the optical frequency transmission system by reducing the length of the interferometer. Following optimization, the phase-temperature coefficient of the optical system is reduced to approximately 1.35 fs/K. By applying a sophisticated temperature control to the remained “out-of-loop” optics fiber, the noise floor of the system has been effectively lowered to 10−21 level. Based on this performance-enhanced transfer system, we demonstrate coherent transmission of optical frequency through 500-km spooled fiber link. After being actively compensated, the transfer instability of 4.5 × 10−16 at the averaging time of 1 s and 5.6 × 10−21 at 10000 s is demonstrated. The frequency uncertainty of received light at remote site relative to that of the origin light at local site is achieved to be 1.15 × 10−19. This enhanced system configuration is particularly well suited for future long-distance frequency transmission and comparison of the most advanced optical clock signals.

Chinese Physics Letters•Jul 25, 2024•7 citations
We report a technique for coherence transfer of laser light through a fiber link, where the optical phase noise induced by environmental perturbations via the fiber link is compensated by remote users with passive phase noise correction, rather than at the local site as is conventional. Neither phase discrimination nor active phase tracking is required due to the open-loop design, mitigating some technical problems such as the limited compensation speed and the finite compensation precision as conventional active phase noise cancellation. We theoretically analyze and experimentally demonstrate that the delay-limited residual fiber phase noise after phase noise compensation is a factor of seven higher than the conventional techniques. Using this technique, we demonstrate the transfer laser light through a 145-km-long, lab-based spooled fiber. After being compensated, a relative frequency instability is 1.9 × 10-15at the integration time of 1 s and scales down to the level of 10-18-range at 10,000 s. The frequency uncertainty of the light after transferring through the fiber relative to that of the input light is (-0.36 ± 2.6) × 10-18. As the transmitted optical signal remains unaltered until it reaches the remote sites, it can be transmitted simultaneously to multiple remote sites on an arbitrarily complex fiber network, paving a way to develop a multi-node optical frequency dissemination system with post automatic phase noise correction for a number of end-users.
We present a technique for coherence transfer of laser light through a branching fiber link, where the optical phase noise induced by environmental perturbations via the fiber link is passively compensated by remote users without the requirements of any active servo components. At each remote site, an acousto-optic modulator (AOM) is simultaneously taken as a frequency distinguisher for distinguishing its unique frequency from other sites' and as an optical actuator for compensating the phase noise coming from the optical fiber. With this configuration, we incorporate a long outside loop path consisting of a fiber-pigtailed AOM into the loop, enabling the significant reduction of the outside loop phase noise in the passive way. To further address the residual out-of-loop phase noise coming from the interferometer and the two-way optical frequency comparison setup, we design a low-noise active temperature stabilization system. Measurements with a back-to-back system show that the stability in our stabilization system is 2×10-16at 1 s, reaching 2×10-20after 10,000s. Adopting these techniques, we demonstrate transfer of a laser light through a branching fiber network with 50 km and 145 km two fiber links. After being compensated for the 145 km fiber link, the relative frequency instability is 3.4×10-15at the 1 s averaging time and scales down to 3.7×10-19at the 10,000 s averaging time. This proposed technique is suitable for the simultaneous transfer of an optical signal to a number of independent users within a local area.
We present a technique for the coherence transfer of laser light through a fiber link, where the optical phase noise induced by environmental perturbation via the fiber link is compensated by remote users. When compensating the fiber noise by remote users, the time base at the remote site independent from that at the local site does not destroy the performance of the fiber output light. Using this technique, we demonstrate the transfer of subhertz-linewidth laser light through a 25-km-long, lab-based spooled fiber. After being compensated, the relative linewidth between the fiber input and output light is 1 mHz, and the relative frequency instability is 4×10−17 at 1 s averaging time and scales down to 2×10−19 at 800 s averaging time. The frequency uncertainty of the light after transferring through the fiber relative to that of the input light is 3.0×10−19. This system is suitable for the simultaneous transfer of an optical signal to a number of end users within a city.
In this paper, we present a remote time-base-free technique for a coherent optical frequency transfer system via fiber.At the remote site, the thermal noise of the optical components is corrected along with the link phase noise caused by environmental effects.In this system, a 1 × 2 acousto-optic modulator (AOM) is applied at the remote site, with the first light being used to eliminate the noise of the remote time base and interface with remote users while the zeroth light is used to establish an active noise canceling loop.With this technique, a 10 MHz commercial oscillator, used as a time base at the remote site, does not contribute to the noise of the transferred signal.An experimental system is constructed using a 150 km fiber spool to validate the proposed technique.After compensation, the overlapping Allan deviation of the transfer link is 7.42 × 10 -15 at 1 s integration time and scales down to 1.07 × 10 -18 at 10,000 s integration time.The uncertainty of the transmitted optical frequency is on the order of a few 10 -19 .This significantly reduces the time-base requirements and costs for multi-user applications without compromising transfer accuracy.Meanwhile, these results show great potential for transferring ultra-stable optical frequency signals to remote sites, especially for point-to-multi-users.
We demonstrate coherent optical frequency dissemination over a distance of 972 km by cascading two spans where the phase noise is passively compensated for. Instead of employing a phase discriminator and a phase locking loop in the conventional active phase control scheme, the passive phase noise cancellation is realized by feeding double-trip beat-note frequency to the driver of the acoustic optical modulator at the local site. This passive scheme exhibits fine robustness and reliability, making it suitable for long-distance and noisy fiber links. An optical regeneration station is used in the link for signal amplification and cascaded transmission. The phase noise cancellation and transfer instability of the 972-km link is investigated, and transfer instability of 1.1 × 10−19 at 104 s is achieved. This work provides a promising method for realizing optical frequency distribution over thousands of kilometers by using fiber links.
In this Letter, we propose and demonstrate a multi-access fiber-optic radio frequency dissemination with passive phase noise cancelation. A forward phase-conjugated signal is generated at the local site by frequency mixing between the standard signal and the round-trip probe signal. A stable frequency signal is achieved by frequency mixing the tapped forward phase-conjugated signal and the backward probe signal at an arbitrary point along the fiber link. Different wavelengths for forward and backward directions are employed to efficiently suppress the effect of backscattering. At the same time, the increase of bidirectional asymmetry with the increase of user ends is avoided by employing the same wavelengths for all user ends. A multi-access frequency transfer over a 45 km fiber link based on the proposed scheme is demonstrated. The radio frequency signals with relative frequency stabilities of 10−17/20,000 s level are reproduced at two points of 5 and 40 km far from the local site along the fiber link, respectively.
Abstract Our primary objective is to mitigate the adverse effects of temperature fluctuations on the optical frequency transmission system by reducing the length of the interferometer. Following optimization, the phase-temperature coefficient of the optical system is reduced to approximately 1.35 fs/K. By applying a sophisticated temperature control to the remained “out-of-loop” optics fiber, the noise floor of the system has been effectively lowered to 10−21 level. Based on this performance-enhanced transfer system, we demonstrate coherent transmission of optical frequency through 500-km spooled fiber link. After being actively compensated, the transfer instability of 4.5 × 10−16 at the averaging time of 1 s and 5.6 × 10−21 at 10000 s is demonstrated. The frequency uncertainty of received light at remote site relative to that of the origin light at local site is achieved to be 1.15 × 10−19. This enhanced system configuration is particularly well suited for future long-distance frequency transmission and comparison of the most advanced optical clock signals.