Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Chinese Optics Letters

Optical frequency transfer link with remote site compensation

Qi Zang, Xiang Zhang, Xue Deng, Qian Zhou, Dan Wang, Yucan Zhang, Jing Gao, Dongdong Jiao, Guanjun Xu, Tao Liu, Ruifang Dong, Shougang Zhang

Published Jan 1, 2024• 2 citations
Publisher

Abstract

In this paper, we present a remote time-base-free technique for a coherent optical frequency transfer system via fiber.At the remote site, the thermal noise of the optical components is corrected along with the link phase noise caused by environmental effects.In this system, a 1 × 2 acousto-optic modulator (AOM) is applied at the remote site, with the first light being used to eliminate the noise of the remote time base and interface with remote users while the zeroth light is used to establish an active noise canceling loop.With this technique, a 10 MHz commercial oscillator, used as a time base at the remote site, does not contribute to the noise of the transferred signal.An experimental system is constructed using a 150 km fiber spool to validate the proposed technique.After compensation, the overlapping Allan deviation of the transfer link is 7.42 × 10 -15 at 1 s integration time and scales down to 1.07 × 10 -18 at 10,000 s integration time.The uncertainty of the transmitted optical frequency is on the order of a few 10 -19 .This significantly reduces the time-base requirements and costs for multi-user applications without compromising transfer accuracy.Meanwhile, these results show great potential for transferring ultra-stable optical frequency signals to remote sites, especially for point-to-multi-users.

DOI
10.3788/col202422.090601

Related papers

Branching Optical Frequency Transfer With Enhanced Post Automatic Phase Noise Cancellation

Ruimin Xue, Liang Hu, Jianguo Shen +2 more

We present a technique for coherence transfer of laser light through a branching fiber link, where the optical phase noise induced by environmental perturbations via the fiber link is passively compensated by remote users without the requirements of any active servo components. At each remote site, an acousto-optic modulator (AOM) is simultaneously taken as a frequency distinguisher for distinguishing its unique frequency from other sites' and as an optical actuator for compensating the phase noise coming from the optical fiber. With this configuration, we incorporate a long outside loop path consisting of a fiber-pigtailed AOM into the loop, enabling the significant reduction of the outside loop phase noise in the passive way. To further address the residual out-of-loop phase noise coming from the interferometer and the two-way optical frequency comparison setup, we design a low-noise active temperature stabilization system. Measurements with a back-to-back system show that the stability in our stabilization system is 2×10-16at 1 s, reaching 2×10-20after 10,000s. Adopting these techniques, we demonstrate transfer of a laser light through a branching fiber network with 50 km and 145 km two fiber links. After being compensated for the 145 km fiber link, the relative frequency instability is 3.4×10-15at the 1 s averaging time and scales down to 3.7×10-19at the 10,000 s averaging time. This proposed technique is suitable for the simultaneous transfer of an optical signal to a number of independent users within a local area.

arXiv:2104.13477•Journal of Lightwave Technology•Apr 28, 2021•18 citations

Multi-node optical frequency dissemination with post automatic phase correction

Liang Hu, Xueyang Tian, Guiling Wu +3 more

We report a technique for coherence transfer of laser light through a fiber link, where the optical phase noise induced by environmental perturbations via the fiber link is compensated by remote users with passive phase noise correction, rather than at the local site as is conventional. Neither phase discrimination nor active phase tracking is required due to the open-loop design, mitigating some technical problems such as the limited compensation speed and the finite compensation precision as conventional active phase noise cancellation. We theoretically analyze and experimentally demonstrate that the delay-limited residual fiber phase noise after phase noise compensation is a factor of seven higher than the conventional techniques. Using this technique, we demonstrate the transfer laser light through a 145-km-long, lab-based spooled fiber. After being compensated, a relative frequency instability is 1.9 × 10-15at the integration time of 1 s and scales down to the level of 10-18-range at 10,000 s. The frequency uncertainty of the light after transferring through the fiber relative to that of the input light is (-0.36 ± 2.6) × 10-18. As the transmitted optical signal remains unaltered until it reaches the remote sites, it can be transmitted simultaneously to multiple remote sites on an arbitrarily complex fiber network, paving a way to develop a multi-node optical frequency dissemination system with post automatic phase noise correction for a number of end-users.

arXiv:2001.05712•Journal of Lightwave Technology•Jan 1, 2020•24 citations

Coherence transfer of subhertz-linewidth laser light via an optical fiber noise compensated by remote users

Lifei Wu, Yanyi Jiang, Chaoqun Ma +3 more

We present a technique for the coherence transfer of laser light through a fiber link, where the optical phase noise induced by environmental perturbation via the fiber link is compensated by remote users. When compensating the fiber noise by remote users, the time base at the remote site independent from that at the local site does not destroy the performance of the fiber output light. Using this technique, we demonstrate the transfer of subhertz-linewidth laser light through a 25-km-long, lab-based spooled fiber. After being compensated, the relative linewidth between the fiber input and output light is 1 mHz, and the relative frequency instability is 4×10−17 at 1 s averaging time and scales down to 2×10−19 at 800 s averaging time. The frequency uncertainty of the light after transferring through the fiber relative to that of the input light is 3.0×10−19. This system is suitable for the simultaneous transfer of an optical signal to a number of end users within a city.

Optics Letters•Sep 13, 2016•19 citations

Robust optical frequency transfer in a noisy urban fiber network

Xiang Zhang, Liang Hu, Xue Deng +6 more

Optical fibers have been recognized as one of the most promising host material for high phase coherence optical frequency transfer over thousands of kilometers. In the pioneering work, the active phase noise cancellation (ANC) technique has been widely used for suppressing the fiber phase noise introduced by the environmental perturbations, in which an ideal phase detector with high resolution and unlimited detection range is needed to extract the fiber phase noise, in particular for noisy fiber links. We demonstrate the passive phase noise cancellation (PNC) technique without the need of phase detector could be preferable for noisy fiber links. To avoid the effect of the radio frequency (RF) from the time base at the local site in the conventional active or passive phase noise cancellation techniques, here we introduce a fiber-pigtailed acousto-optic modulator (AOM) with two diffraction order outputs (0 and +1 order) with properly allocating the AOM-driving frequencies allowing to cancel the time base effect. Using this technique, we demonstrate transfer of coherent light through a 260 km noisy urban fiber link. The results show the effect of the RF reference can be successfully removed. After being passively compensated, {we demonstrate a fractional frequency instability of $4.9\times10^{-14}$ at the integration time of 1 s and scales down to $10^{-20}$ level at 10,000 s in terms of modified Allan deviation over the 260 km noisy urban fiber link}. The frequency uncertainty of the retrieved light after transferring through this noise-compensated fiber link relative to that of the input light achieves $(0.41\pm4.7)\times10^{-18}$. The proposed technique opens a way to a broad distribution of an ultrastable frequency reference with high coherence without any effects coming from the RF reference and enables a wide range of applications beyond metrology over fiber networks.

arXiv:2106.12897•Jun 24, 2021•1 citation

Multiple-Branch Optical Frequency Transfer Without the Frequency Allocation Constraints

Jianguo Shen, Ziang Qiu, Ruimin Xue +9 more

We report on the realization of a multiple-branch optical frequency transfer method, which can be adopted to deliver an optical reference to multiple independent remote sites. In comparison with the previous techniques, the proposed technique mitigates the frequency allocation constraints of the driving frequencies for the acousto-optic modulators (AOMs) at the remote sites by adding a short loop fiber link at the local site. The end-to-end optical path phase noise detection and compensation for each remote site is simultaneously performed at the remote site, which significantly simplifies the configuration at the local site, and can improve the signal-to-noise ratio (SNR) and reduce the cycle slip rate. We also conduct theoretical analysis for the effect of frequency aliasing from the perspective of different refractive index in triple-pass optical frequency transfer, analyze the effect of the SNR and cycle slips on the fractional frequency instability, and present a comprehensive equation for calculating noise contributions from end-to-end optical frequency transfer over the multiple-branch fiber network, demonstrating that the implementation of the fiber noise cancellation (FNC) for the each branch consisting of two fiber topologies with the single FNC setup is practical. This technique paves the way to integrate the optical frequency networks into the existing fiber communication networks with the higher compatibility and reliability.

Journal of Lightwave Technology•Apr 5, 2023•9 citations

Coherent Optical Frequency Transfer over 100 km Fiber Link Using Bidirectional Active Optics

Hanxu Wu, Xiaoming Zhang, Weinan Zhao +7 more

SummaryPrecise and stable coherent optical frequency transfer over long-haul fiber link is required by diverse scientific applications, such as large-scale optical clock networks, global positioning and timing, very-long baseline interferometry, and high-sensitivity tests of fundamental physics. To meet the needs of the above applications, active compensation schemes for cancelling fiber-induced phase noise has developed considerably over the past ten years. However, optical signal severely reduces across distant fiber-optic networks, which degrades optical beat signal and feedback control.Here, we adopt active phase compensation and bidirectional optical frequency locking to achieve ultra-stable optical carrier transfer. The phase noise of the fiber link is effectively suppressed, meanwhile, the ultra-stable optical frequency signal is regenerated accurately at the remote site.Preliminary experiment over 100 km fiber link indicates that the additional frequency stability exhibits 1.9×10-16and 2.5×10-17at an averaging time of 1 s and 100 s, respectively. This approach has a capacity of extending to the parallel transfer of microwave and optical frequency, and free-space optical frequency transfer.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•May 15, 2023•0 citations
In this paper, we present a remote time-base-free technique for a coherent optical frequency transfer system via fiber.At the remote site, the thermal noise of the optical components is corrected along with the link phase noise caused by environmental effects.In this system, a 1 × 2 acousto-optic modulator (AOM) is applied at the remote site, with the first light being used to eliminate the noise of the remote time base and interface with remote users while the zeroth light is used to establish an active noise canceling loop.With this technique, a 10 MHz commercial oscillator, used as a time base at the remote site, does not contribute to the noise of the transferred signal.An experimental system is constructed using a 150 km fiber spool to validate the proposed technique.After compensation, the overlapping Allan deviation of the transfer link is 7.42 × 10 -15 at 1 s integration time and scales down to 1.07 × 10 -18 at 10,000 s integration time.The uncertainty of the transmitted optical frequency is on the order of a few 10 -19 .This significantly reduces the time-base requirements and costs for multi-user applications without compromising transfer accuracy.Meanwhile, these results show great potential for transferring ultra-stable optical frequency signals to remote sites, especially for point-to-multi-users.
We present a technique for coherence transfer of laser light through a branching fiber link, where the optical phase noise induced by environmental perturbations via the fiber link is passively compensated by remote users without the requirements of any active servo components. At each remote site, an acousto-optic modulator (AOM) is simultaneously taken as a frequency distinguisher for distinguishing its unique frequency from other sites' and as an optical actuator for compensating the phase noise coming from the optical fiber. With this configuration, we incorporate a long outside loop path consisting of a fiber-pigtailed AOM into the loop, enabling the significant reduction of the outside loop phase noise in the passive way. To further address the residual out-of-loop phase noise coming from the interferometer and the two-way optical frequency comparison setup, we design a low-noise active temperature stabilization system. Measurements with a back-to-back system show that the stability in our stabilization system is 2×10-16at 1 s, reaching 2×10-20after 10,000s. Adopting these techniques, we demonstrate transfer of a laser light through a branching fiber network with 50 km and 145 km two fiber links. After being compensated for the 145 km fiber link, the relative frequency instability is 3.4×10-15at the 1 s averaging time and scales down to 3.7×10-19at the 10,000 s averaging time. This proposed technique is suitable for the simultaneous transfer of an optical signal to a number of independent users within a local area.
We report a technique for coherence transfer of laser light through a fiber link, where the optical phase noise induced by environmental perturbations via the fiber link is compensated by remote users with passive phase noise correction, rather than at the local site as is conventional. Neither phase discrimination nor active phase tracking is required due to the open-loop design, mitigating some technical problems such as the limited compensation speed and the finite compensation precision as conventional active phase noise cancellation. We theoretically analyze and experimentally demonstrate that the delay-limited residual fiber phase noise after phase noise compensation is a factor of seven higher than the conventional techniques. Using this technique, we demonstrate the transfer laser light through a 145-km-long, lab-based spooled fiber. After being compensated, a relative frequency instability is 1.9 × 10-15at the integration time of 1 s and scales down to the level of 10-18-range at 10,000 s. The frequency uncertainty of the light after transferring through the fiber relative to that of the input light is (-0.36 ± 2.6) × 10-18. As the transmitted optical signal remains unaltered until it reaches the remote sites, it can be transmitted simultaneously to multiple remote sites on an arbitrarily complex fiber network, paving a way to develop a multi-node optical frequency dissemination system with post automatic phase noise correction for a number of end-users.
We present a technique for the coherence transfer of laser light through a fiber link, where the optical phase noise induced by environmental perturbation via the fiber link is compensated by remote users. When compensating the fiber noise by remote users, the time base at the remote site independent from that at the local site does not destroy the performance of the fiber output light. Using this technique, we demonstrate the transfer of subhertz-linewidth laser light through a 25-km-long, lab-based spooled fiber. After being compensated, the relative linewidth between the fiber input and output light is 1 mHz, and the relative frequency instability is 4×10−17 at 1 s averaging time and scales down to 2×10−19 at 800 s averaging time. The frequency uncertainty of the light after transferring through the fiber relative to that of the input light is 3.0×10−19. This system is suitable for the simultaneous transfer of an optical signal to a number of end users within a city.
Optical fibers have been recognized as one of the most promising host material for high phase coherence optical frequency transfer over thousands of kilometers. In the pioneering work, the active phase noise cancellation (ANC) technique has been widely used for suppressing the fiber phase noise introduced by the environmental perturbations, in which an ideal phase detector with high resolution and unlimited detection range is needed to extract the fiber phase noise, in particular for noisy fiber links. We demonstrate the passive phase noise cancellation (PNC) technique without the need of phase detector could be preferable for noisy fiber links. To avoid the effect of the radio frequency (RF) from the time base at the local site in the conventional active or passive phase noise cancellation techniques, here we introduce a fiber-pigtailed acousto-optic modulator (AOM) with two diffraction order outputs (0 and +1 order) with properly allocating the AOM-driving frequencies allowing to cancel the time base effect. Using this technique, we demonstrate transfer of coherent light through a 260 km noisy urban fiber link. The results show the effect of the RF reference can be successfully removed. After being passively compensated, {we demonstrate a fractional frequency instability of 4.9×10−144.9\times10^{-14}4.9×10−14 at the integration time of 1 s and scales down to 10−2010^{-20}10−20 level at 10,000 s in terms of modified Allan deviation over the 260 km noisy urban fiber link}. The frequency uncertainty of the retrieved light after transferring through this noise-compensated fiber link relative to that of the input light achieves (0.41±4.7)×10−18(0.41\pm4.7)\times10^{-18}(0.41±4.7)×10−18. The proposed technique opens a way to a broad distribution of an ultrastable frequency reference with high coherence without any effects coming from the RF reference and enables a wide range of applications beyond metrology over fiber networks.
We report on the realization of a multiple-branch optical frequency transfer method, which can be adopted to deliver an optical reference to multiple independent remote sites. In comparison with the previous techniques, the proposed technique mitigates the frequency allocation constraints of the driving frequencies for the acousto-optic modulators (AOMs) at the remote sites by adding a short loop fiber link at the local site. The end-to-end optical path phase noise detection and compensation for each remote site is simultaneously performed at the remote site, which significantly simplifies the configuration at the local site, and can improve the signal-to-noise ratio (SNR) and reduce the cycle slip rate. We also conduct theoretical analysis for the effect of frequency aliasing from the perspective of different refractive index in triple-pass optical frequency transfer, analyze the effect of the SNR and cycle slips on the fractional frequency instability, and present a comprehensive equation for calculating noise contributions from end-to-end optical frequency transfer over the multiple-branch fiber network, demonstrating that the implementation of the fiber noise cancellation (FNC) for the each branch consisting of two fiber topologies with the single FNC setup is practical. This technique paves the way to integrate the optical frequency networks into the existing fiber communication networks with the higher compatibility and reliability.
SummaryPrecise and stable coherent optical frequency transfer over long-haul fiber link is required by diverse scientific applications, such as large-scale optical clock networks, global positioning and timing, very-long baseline interferometry, and high-sensitivity tests of fundamental physics. To meet the needs of the above applications, active compensation schemes for cancelling fiber-induced phase noise has developed considerably over the past ten years. However, optical signal severely reduces across distant fiber-optic networks, which degrades optical beat signal and feedback control.Here, we adopt active phase compensation and bidirectional optical frequency locking to achieve ultra-stable optical carrier transfer. The phase noise of the fiber link is effectively suppressed, meanwhile, the ultra-stable optical frequency signal is regenerated accurately at the remote site.Preliminary experiment over 100 km fiber link indicates that the additional frequency stability exhibits 1.9×10-16and 2.5×10-17at an averaging time of 1 s and 100 s, respectively. This approach has a capacity of extending to the parallel transfer of microwave and optical frequency, and free-space optical frequency transfer.