Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

APL Photonics

Optical frequency transfer with below 10−21 uncertainty using a DFB–laser-based fiber Brillouin amplifier

Jaffar Emad Kadum, Jingxian Ji, Alexander Kühl, Mattias Misera, Thomas Waterholter, Sebastian Koke

Published Mar 1, 2023• 7 citations
Publisher

Abstract

Exploiting the outstanding performance of optical atomic clocks for improved timekeeping, relativistic geodesy, and fundamental physics beyond the standard model demands comparing distant state-of-the-art optical clocks. Interferometric optical fiber links have been demonstrated as an eminent method for such frequency comparisons over distances up to thousands of kilometers. However, for such distances, the optical fiber attenuation mandates signal amplification. Fiber Brillouin amplification (FBA) has been proven as an efficient amplification technique for coherent frequency transfer. Demonstrated FBA schemes have been designed based on costly narrow-linewidth pump lasers and analog pump-to-signal phase locking schemes. Furthermore, the high pump power requirement of these FBAs hinders the integration of FBA-based frequency dissemination on fiber connections for shared telecommunication signals in the C-band. In this paper, we propose and experimentally demonstrate a novel FBA module (FBAM) employing cost-effective distributed feedback (DFB) pump lasers assisted by a digital phase locking scheme based on a field programmable gated array. The new FBAM is compact, cost-effective, and directly applicable to different bands, which opens up new opportunities to establish a frequency metrology infrastructure within existing telecommunication fiber networks. Additionally, the small-footprint of the DFB-FBAM allows for frequent amplification stages with lower pump power to reach continental scale optical metrology links with an optimized signal-to-noise ratio. We characterized the DFB-FBAM’s frequency transfer uncertainty using a two-way layout over an in-lab 100 km long optical fiber link and reach a fractional frequency instability of 9.3 × 10−22 at a 10 ks integration time. The DFB-FBAM characterizations show uncertainty contributions of (−2.1 ± 3.3) × 10−22 and below for averaging times >100 ks. For the first time, we assess the temporal Brillouin frequency shift variations in an underground fiber link and implement a scheme to track these changes in a remote FBAM.

DOI
10.1063/5.0133919

Related papers

Setup and Characterization of a Fiber Brillouin Amplifier Module for Optical Frequency Transfer Over Interferometric Fiber Links

Alexander Kühl, Sebastian Koke, Andreas Koczwara +2 more

Abstract The details of fiber Brillouin amplifier modules developed for optical frequency dissemination and installed on the fiber link between Braunschweig and Strasbourg for performing optical clock comparisons are described and documented. The performance of these fiber Brillouin amplification modules is characterized in terms of gain, one‐way phase shift, and signal‐to‐noise ratio across a wide parameter space of signal and pump powers. Finally, upper estimates are derived for the frequency transfer uncertainty contributions resulting from the non‐reciprocity induced by the fiber Brillouin amplifier modules based on the characterized one‐way phase shift.

Annalen der Physik•Feb 22, 2025•0 citations

Optical fiber link for ultra-stable frequency dissemination and atomic clock comparisons

Anne Amy‐Klein, Nicolas Quintin, N. Chiodo +42 more

The transfer of ultra-stable frequencies between distant laboratories is required by many applications from fundamental metrology to high-precision measurements. For that purpose, optical fibre links have been intensively studied over the last decade. They have demonstrated impressive results far beyond the GPS capabilities on distances up to 2000 km, thanks to an active compensation of the fiber propagation noise.Up to now, optical links has been mainly implemented between two labs, when future applications will require the development of metrological fiber networks. Towards this goal, we have developed a few techniques which allow us to distribute the ultrastable optical signal to many users simultaneously. We have designed repeater laser stations, which can be used to build a cascaded link or to distribute the ultrastable signal among two optical links [1]. These stations allow us also to compare the output end signals of two optical links. These versatile stations will be a key-component of the national metrological network currently being developed in France within the Refimeve+ project. To complete the network, we have demonstrated the extraction of the ultrastable signal from a main link and its seeding to a secondary link [2].Optical links are already been successfully used for clocks comparison. Recently we were able to compare the atomic clocks of the French and German National Metrology Institutes through two connected optical links of total length 1415-km [3]. We found that the two fully independent Sr lattice optical clocks at the two sites agreed to better than 5x10-17 limited only by the clocks uncertainties. A fractional statistical uncertainty of 3x10-17 was reached after only 1000 s averaging time, which is 10 times better, and more than four orders of magnitude faster than with any other existing frequency transfer method. The atomic fountain primary frequency standards from the two institutes were also compared and they were found to agree well within their combined uncertainties of a few 10-16 [4].

•Jan 1, 2017•0 citations

Optical frequency transfer via a 660 km underground fiber link using a remote Brillouin amplifier

S. M. F. Raupach, A. Koczwara, G. Grosche

In long-distance, optical continuous-wave frequency transfer via fiber, remote bidirectional Er³ ⁺ -doped fiber amplifiers are commonly used to mitigate signal attenuation. We demonstrate for the first time the ultrastable transfer of an optical frequency using a remote fiber Brillouin amplifier, placed in a server room along the link. Using it as the only means of remote amplification, on a 660 km loop of installed underground fiber we bridge distances of 250 km and 160 km between amplifications. Over several days of uninterrupted measurement, we find an instability of the frequency transfer (Allan deviation of Λ-weighted data with 1 s gate time) of around 1 × 10(-19) and less for averaging times longer than 3000 s. The modified Allan deviation reaches 3 × 10(-19) at an averaging time of 100 s. Beyond 100 s it follows the interferometer noise floor, and for averaging times longer than 1000 s the modified Allan deviation is in the 10(-20) range. A conservative value of the overall accuracy is 1 × 10(-19)

arXiv:1407.4907•Optics Express•Oct 20, 2014•46 citations

Combining fiber Brillouin amplification with a repeater laser station for fiber-based optical frequency dissemination over 1400 km

Sebastian Koke, Alexander Kühl, Thomas Waterholter +7 more

Abstract We investigate optical frequency dissemination over a 1400 km long fiber link in looped configuration over a pair of underground fibers between Braunschweig and Strasbourg. This fiber link is the first to combine fiber Brillouin amplifiers with a repeater laser station. Phase-coherent operation over more than five days is demonstrated. We analyze the repeatability of the performance over four campaigns and present results of 65 d in total. The weighted mean of the fractional frequency offset of the transferred optical frequency over the complete data set is (−1.1 ± 0.4)×10–20. By analyzing the stabilization signals of the two individual fibers, the correlation of the phase noise on the two fibers is shown to be >98%.

arXiv:1911.01215•New Journal of Physics•Nov 29, 2019•30 citations

A 1880 km Long Interferometric Optical Fibre Link PTB-MPQ-PTB for Chronometric Levelling with a Transportable Optical Clock

Alexander Kühl, Gulnara A. Vishnyakova, Thomas Waterholter +3 more

Chronometrie levelling [1-3] is a technique of deriving gravitational potential differences from clock frequency comparisons allowing the determination of height differences. Interferometric optical fibre links (IFL) [4] enable chronometric levelling between distant labs housing optical clocks [5]. An IFL is a phase stabilized telecom fibre link connection establishing a fixed optical phase relationship between two locations up to ~1000 km apart [6]. To perform a chronometric levelling campaign between the stationary optical clocks of the Physikalisch-Technische Bundesanstalt (PTB) and PTB's transportable Strontium clock [7] placed at the Max Planck Institute of Quantum Optics (MPQ) we have established a new 940 km long IFL between the two locations. At both link ends the frequencies of the clock lasers are compared to the 1,5 pm link transfer laser via fs-combs. To enable chronometric levelling experiments at the level of 10 cm height resolution, we aim a fractional frequency uncertainty of the frequency transfer of-18for averaging times of ~40 ks. To monitor the frequency transfer over the complete 940 km long fibre link the signal is sent back from the receiving end to the sender on a second fibre, which allows an out-of-loop characterization using data of the 1880 km loop. We study two different link setups, cf. Fig. 1a: i) a single-span loop configuration with the option to tap off the signal at MPQ with a passive frequency extraction unit [8]. This setup requires monitoring at the sending end only and allows us to investigate an ultralong IFL, even longer than the previous record [9]. And ii) an antiparallel configuration of two concatenated, individually stabilized interferometric fibre links. This setup offers lower instabilities due to a decreased delay-limit [10] but requires setting up and maintaining a stabilization system at both link ends. To compensate the attenuation of the fibres we used fibre Brillouin amplifier modules (FBAM) developed inhouse providing a typical gain of > 40 dB.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 1, 2019•1 citation

Two-way optical frequency comparisons at 5*10^-21 relative stability over 100-km telecommunication network fibers

A Bercy, Fabio Stefani, Olivier Lopez +3 more

By using two-way frequency transfer, we demonstrate ultra-high resolution comparison of optical frequencies over a telecommunication fiber link of 100 km operating simultaneously digital data transfer. We first propose and experiment a bi-directional scheme using a single fiber. We show that the relative stability at 1 s integration time is 7 10^18 and scales down to 5 10^21. The same level of performance is reached when an optical link is implemented with an active compensation of the fiber noise. We also implement a real-time two-way frequency comparison over a uni-directional telecommunication network using a pair of parallel fibers. The relative frequency stability is 10^15 at 1 s integration time and reaches 2 10^17 at 40 000 s. The fractional uncertainty of the frequency comparisons was evaluated for the best case to 2 10^20. These results open the way to accurate and high resolution frequency comparison of optical clocks over intercontinental fiber networks.

European Quantum Electronics Conference (EQEC)•Jan 1, 2015•5 citations
Exploiting the outstanding performance of optical atomic clocks for improved timekeeping, relativistic geodesy, and fundamental physics beyond the standard model demands comparing distant state-of-the-art optical clocks. Interferometric optical fiber links have been demonstrated as an eminent method for such frequency comparisons over distances up to thousands of kilometers. However, for such distances, the optical fiber attenuation mandates signal amplification. Fiber Brillouin amplification (FBA) has been proven as an efficient amplification technique for coherent frequency transfer. Demonstrated FBA schemes have been designed based on costly narrow-linewidth pump lasers and analog pump-to-signal phase locking schemes. Furthermore, the high pump power requirement of these FBAs hinders the integration of FBA-based frequency dissemination on fiber connections for shared telecommunication signals in the C-band. In this paper, we propose and experimentally demonstrate a novel FBA module (FBAM) employing cost-effective distributed feedback (DFB) pump lasers assisted by a digital phase locking scheme based on a field programmable gated array. The new FBAM is compact, cost-effective, and directly applicable to different bands, which opens up new opportunities to establish a frequency metrology infrastructure within existing telecommunication fiber networks. Additionally, the small-footprint of the DFB-FBAM allows for frequent amplification stages with lower pump power to reach continental scale optical metrology links with an optimized signal-to-noise ratio. We characterized the DFB-FBAM’s frequency transfer uncertainty using a two-way layout over an in-lab 100 km long optical fiber link and reach a fractional frequency instability of 9.3 × 10−22 at a 10 ks integration time. The DFB-FBAM characterizations show uncertainty contributions of (−2.1 ± 3.3) × 10−22 and below for averaging times >100 ks. For the first time, we assess the temporal Brillouin frequency shift variations in an underground fiber link and implement a scheme to track these changes in a remote FBAM.
Abstract The details of fiber Brillouin amplifier modules developed for optical frequency dissemination and installed on the fiber link between Braunschweig and Strasbourg for performing optical clock comparisons are described and documented. The performance of these fiber Brillouin amplification modules is characterized in terms of gain, one‐way phase shift, and signal‐to‐noise ratio across a wide parameter space of signal and pump powers. Finally, upper estimates are derived for the frequency transfer uncertainty contributions resulting from the non‐reciprocity induced by the fiber Brillouin amplifier modules based on the characterized one‐way phase shift.
The transfer of ultra-stable frequencies between distant laboratories is required by many applications from fundamental metrology to high-precision measurements. For that purpose, optical fibre links have been intensively studied over the last decade. They have demonstrated impressive results far beyond the GPS capabilities on distances up to 2000 km, thanks to an active compensation of the fiber propagation noise.Up to now, optical links has been mainly implemented between two labs, when future applications will require the development of metrological fiber networks. Towards this goal, we have developed a few techniques which allow us to distribute the ultrastable optical signal to many users simultaneously. We have designed repeater laser stations, which can be used to build a cascaded link or to distribute the ultrastable signal among two optical links [1]. These stations allow us also to compare the output end signals of two optical links. These versatile stations will be a key-component of the national metrological network currently being developed in France within the Refimeve+ project. To complete the network, we have demonstrated the extraction of the ultrastable signal from a main link and its seeding to a secondary link [2].Optical links are already been successfully used for clocks comparison. Recently we were able to compare the atomic clocks of the French and German National Metrology Institutes through two connected optical links of total length 1415-km [3]. We found that the two fully independent Sr lattice optical clocks at the two sites agreed to better than 5x10-17 limited only by the clocks uncertainties. A fractional statistical uncertainty of 3x10-17 was reached after only 1000 s averaging time, which is 10 times better, and more than four orders of magnitude faster than with any other existing frequency transfer method. The atomic fountain primary frequency standards from the two institutes were also compared and they were found to agree well within their combined uncertainties of a few 10-16 [4].
In long-distance, optical continuous-wave frequency transfer via fiber, remote bidirectional Er³ ⁺ -doped fiber amplifiers are commonly used to mitigate signal attenuation. We demonstrate for the first time the ultrastable transfer of an optical frequency using a remote fiber Brillouin amplifier, placed in a server room along the link. Using it as the only means of remote amplification, on a 660 km loop of installed underground fiber we bridge distances of 250 km and 160 km between amplifications. Over several days of uninterrupted measurement, we find an instability of the frequency transfer (Allan deviation of Λ-weighted data with 1 s gate time) of around 1 × 10(-19) and less for averaging times longer than 3000 s. The modified Allan deviation reaches 3 × 10(-19) at an averaging time of 100 s. Beyond 100 s it follows the interferometer noise floor, and for averaging times longer than 1000 s the modified Allan deviation is in the 10(-20) range. A conservative value of the overall accuracy is 1 × 10(-19)
Abstract We investigate optical frequency dissemination over a 1400 km long fiber link in looped configuration over a pair of underground fibers between Braunschweig and Strasbourg. This fiber link is the first to combine fiber Brillouin amplifiers with a repeater laser station. Phase-coherent operation over more than five days is demonstrated. We analyze the repeatability of the performance over four campaigns and present results of 65 d in total. The weighted mean of the fractional frequency offset of the transferred optical frequency over the complete data set is (−1.1 ± 0.4)×10–20. By analyzing the stabilization signals of the two individual fibers, the correlation of the phase noise on the two fibers is shown to be >98%.
Chronometrie levelling [1-3] is a technique of deriving gravitational potential differences from clock frequency comparisons allowing the determination of height differences. Interferometric optical fibre links (IFL) [4] enable chronometric levelling between distant labs housing optical clocks [5]. An IFL is a phase stabilized telecom fibre link connection establishing a fixed optical phase relationship between two locations up to ~1000 km apart [6]. To perform a chronometric levelling campaign between the stationary optical clocks of the Physikalisch-Technische Bundesanstalt (PTB) and PTB's transportable Strontium clock [7] placed at the Max Planck Institute of Quantum Optics (MPQ) we have established a new 940 km long IFL between the two locations. At both link ends the frequencies of the clock lasers are compared to the 1,5 pm link transfer laser via fs-combs. To enable chronometric levelling experiments at the level of 10 cm height resolution, we aim a fractional frequency uncertainty of the frequency transfer of-18for averaging times of ~40 ks. To monitor the frequency transfer over the complete 940 km long fibre link the signal is sent back from the receiving end to the sender on a second fibre, which allows an out-of-loop characterization using data of the 1880 km loop. We study two different link setups, cf. Fig. 1a: i) a single-span loop configuration with the option to tap off the signal at MPQ with a passive frequency extraction unit [8]. This setup requires monitoring at the sending end only and allows us to investigate an ultralong IFL, even longer than the previous record [9]. And ii) an antiparallel configuration of two concatenated, individually stabilized interferometric fibre links. This setup offers lower instabilities due to a decreased delay-limit [10] but requires setting up and maintaining a stabilization system at both link ends. To compensate the attenuation of the fibres we used fibre Brillouin amplifier modules (FBAM) developed inhouse providing a typical gain of > 40 dB.
By using two-way frequency transfer, we demonstrate ultra-high resolution comparison of optical frequencies over a telecommunication fiber link of 100 km operating simultaneously digital data transfer. We first propose and experiment a bi-directional scheme using a single fiber. We show that the relative stability at 1 s integration time is 7 10^18 and scales down to 5 10^21. The same level of performance is reached when an optical link is implemented with an active compensation of the fiber noise. We also implement a real-time two-way frequency comparison over a uni-directional telecommunication network using a pair of parallel fibers. The relative frequency stability is 10^15 at 1 s integration time and reaches 2 10^17 at 40 000 s. The fractional uncertainty of the frequency comparisons was evaluated for the best case to 2 10^20. These results open the way to accurate and high resolution frequency comparison of optical clocks over intercontinental fiber networks.