Optical fiber link for ultra-stable frequency dissemination and atomic clock comparisons

Anne Amy‐Klein, Nicolas Quintin, N. Chiodo, Etienne Cantin, Bercy, Anthony, Christian Chardonnet, Fabrice Wiotte, Olivier Lopez, Won-Kyu Lee, Dan Xu, Fabio Stefani, Daniele Nicolodi, Chunyan Shi, Jean-Luc Robyr, Sławomir Bilicki, Eva Bookjans, Yann Le Coq, Rodolphe Le Targat, Jérôme Lodewyck, Frédéric Meynadier, Michel Abgrall, M. Lours, Jocelyne Guéna, P. Rosenbusch, S. Bize, Paul-Éric Pottie, Émilie Camisard, Giorgio Santarelli, Heiner Denker, S. M. F. Raupach, C. Grebing, Ali Al-Masoudi, Sören Dörscher, Häfner, Sebastian, Andreas Koczwara, Sebastian Koke, Alexander Kühl, Thomas Legero, Harald Schnatz, Uwe Sterr, S. Weyers, V. Gerginov, B. Lipphardt, Christian Lisdat, Gesine Grosche

Published Jan 1, 2017• 0 citations

OpenAlex

Abstract

The transfer of ultra-stable frequencies between distant laboratories is required by many applications from fundamental metrology to high-precision measurements. For that purpose, optical fibre links have been intensively studied over the last decade. They have demonstrated impressive results far beyond the GPS capabilities on distances up to 2000 km, thanks to an active compensation of the fiber propagation noise.Up to now, optical links has been mainly implemented between two labs, when future applications will require the development of metrological fiber networks. Towards this goal, we have developed a few techniques which allow us to distribute the ultrastable optical signal to many users simultaneously. We have designed repeater laser stations, which can be used to build a cascaded link or to distribute the ultrastable signal among two optical links [1]. These stations allow us also to compare the output end signals of two optical links. These versatile stations will be a key-component of the national metrological network currently being developed in France within the Refimeve+ project. To complete the network, we have demonstrated the extraction of the ultrastable signal from a main link and its seeding to a secondary link [2].Optical links are already been successfully used for clocks comparison. Recently we were able to compare the atomic clocks of the French and German National Metrology Institutes through two connected optical links of total length 1415-km [3]. We found that the two fully independent Sr lattice optical clocks at the two sites agreed to better than 5x10-17 limited only by the clocks uncertainties. A fractional statistical uncertainty of 3x10-17 was reached after only 1000 s averaging time, which is 10 times better, and more than four orders of magnitude faster than with any other existing frequency transfer method. The atomic fountain primary frequency standards from the two institutes were also compared and they were found to agree well within their combined uncertainties of a few 10-16 [4].

Related papers

Cascaded optical link on a telecommunication fiber network for ultra-stable frequency dissemination

Olivier Lopez, N. Chiodo, Fabio Stefani +7 more

The transfer of ultra-stable frequencies between distant laboratories is required by many applications in time and frequency metrology, fundamental physics, particle accelerators and astrophysics. Optical fiber links have been intensively studied for a decade and brought the potential to transfer frequency with a very high accuracy and stability thanks to an active compensation of the propagation noise. We are currently developing an optical metrological network using the fibers of the French National Research and Education Network. Using the so-called dark-channel approach, the ultrastable signal is copropagating with data traffic using wavelength division multiplexing. Due to significant reflections and losses along the fibers, which cannot be compensated with amplifiers, we have developed some repeater stations for the metrological signal. These remotely-operated stations amplify the ultrastable signal and compensate the propagation noise. The link is thus composed of a few cascaded spans. It gives the possibility to increase the noise correction bandwidth, which is proportional to the inverse of the fiber length for each span. These stations are a key element for the deployment of a reliable and large scale metrological network. We report here on the implementation of a two-spans cascaded link of 740 km reaching a relative stability of a few 10-20 after 103 s averaging time. Extension to longer links and alternative transfer methods will be discussed.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIEMar 10, 20154 citations

Realization of a phase-coherent optical fiber link for the comparison of remote atomic clocks

Cecilia Clivati

This thesis describes the realization of a facility for the high-accuracy frequency dissemination on a continental scale. This project was developed at the Optics division of the Italian National Metrology Institute (INRIM), which is in charge of the realization and operation of the atomic primary frequency standards, of their dissemination, and cooperates to the International Atomic Time generation. Frequency dissemination is now based on satellite techniques; however, the resolution provided by these methods does not cope with the accuracy and stability of newgeneration frequency standards. For instance, more than 10 days of measurement are needed to effectively compare primary standards, and years would be necessary to compare optical clocks via satellite links. On the other hand, it has been demonstrated that systems based on optical fibers can improve the resolution by about 5 orders of magnitude with respect to satellite techniques. This is the reason why many national metrology institutes in Europe are cooperating to develop a network for frequency dissemination and clocks comparisons all across the continent. This technique is based on the transmission of a narrow-linewidth laser along a standard telecom fiber. At the metrological laboratory, the frequency is measured with respect to a frequency standard, while at the remote link end it is extracted and used as a frequency reference. However, temperature changes, acoustic noise, air flows can degrade the stability of the delivered frequency, and must therefore be compensated. This is done through a Doppler cancellation technique, in which the light travels twice in the optical fiber in opposite directions. This is different from what happens in telecom links, which are inherently bidirectional. Dedicated instruments have therefore been developed. This thesis describes the realization of a phase-stabilized optical link between INRIM and the European Laboratory for Non Linear Spectroscopy in Florence, where an optical clock based on Sr atoms was under development at the time of measurements. This clock has been compared to the INRIM primary standard via the optical link. I worked on the realization of the ultrastable laser sources, on the development and characterization of the optical and electronics apparatus, and at the development of the metrological chain for the remote clocks comparison. This thesis also describes some novel techniques which we investigated in the framework of this project, and new applications of optical fiber links. During my studies I spent two months at the Laboratoire National d'Essais-Systemes de Référence Temps-Espace (LNE-SYRTE) in Paris, where I cooperated to the realization of an ultrastable laser source based on an optical delay line. This is reported in the thesis as well

Jan 1, 20140 citations

Multiplexed optical link for ultra-stable frequency dissemination

Olivier Lopez, Bruno Chanteau, Vincent Roncin +6 more

We transfer the frequency of an ultra-stable laser over a cascaded optical link comprising two compensated links of 150 km and a repeater station. Each link passes through two important nodes of the telecommunication network and includes 114 km of Internet fiber simultaneously carrying data traffic, through a dense wavelength division multiplexing scheme. The metrological signal is inserted in and extracted from the communication network using bidirectional optical add-drop multiplexers. The repeater station is working independently without any remote control. The phase noise on the two links is compensated with the usual round-trip technique. The 300-km multiplexed cascaded link shows an Allan deviation of 3×10-15at one second and 7×10-20at 20 hours. This work paves the way to a wide dissemination of ultra stable optical clock signals between distant laboratories via the Internet network.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)Jun 1, 20103 citations

Development of ultra-stable laser sources and long-distance optical link via telecommunication networks

Haifeng Jiang

The transfer of ultra-stable frequencies between distant laboratories is required by many applications in time and frequency metrology, fundamental physics, particle accelerators and astrophysics. This thesis describes the development of ultra-stable optical links over distances from 86 km to 300 km. The long-term objective is to connect the main European National Metrology Institutes with optical links extending up to 1000 km. The optical link is based on the transfer of the optical phase of an ultra-stable laser emitting light of wavelength 1542 nm through an optical fiber of the telecommunication network. For that purpose, ultra-stable cavity-stabilized lasers and fiber-stabilized lasers have been developed. The fractional instability of cavity-stabilized laser is approximately 10-15 at 1s integration time. The fiber-stabilized lasers are robust, compact, simple, tunable and their frequency noise is comparable to that of the cavity-stabilized laser for Fourier frequencies higher than a few tens of Hertz. Optical links were first demonstrated on 86 km and 172 km using dedicated fibers connecting the laboratories LNE-SYRTE and LPL. Fractional frequency instability in the range of or below 10-19 at 104 s integration time has been obtained. For larger distances, the ultra-stable laser signal is transferred on the Internet network simultaneously with the data traffic but on a dedicated frequency channel, using wavelength division multiplexing. Multiplexed links were demonstrated over distances up to 300 km, with fractional frequency instabilities at the same level or better than with dedicated fibers.

Oct 26, 201010 citations

Long distance ultra-stable frequency dissemination on a dedicated wavelength channel of a telecommunication network

Olivier Lopez, Paul-Éric Pottie, Bruno Chanteau +5 more

Summary form only given. The transfer of ultra-stable frequencies between distant laboratories is a fundamental issue for a wide range of high-sensitivity experiments in advanced metrology and fundamental physics. Since a few years, several experiments of optical frequency transfer were reported over dedicated fiber, with a record distance of 920 km [1] recently demonstrated in Germany. The challenge is now to build a wide frequency dissemination network connecting laboratories and research agencies in Europe.For that purpose we exploit the existing fine meshing of the Internet fiber network, connecting laboratories via the National Research Networks (NRENs). In that scheme, the ultra-stable frequency signal is copropagating simultaneously with the Internet traffic in the same fiber using a dedicated channel in a dense wavelength division multiplexing (DWDM) approach. Optical add-drop multiplexers enable to insert and extract the ultra-stable frequency signal in and from the network.We have demonstrated an ultra-stable optical link over 540 km, including 470 km of public fiber network of the French NREN (RENATER) simultaneously carrying Internet data traffic [2]. The signal bypasses four amplification stages and two Data Center Facilities using multiplexers and custom-made bidirectional erbium-doped fiber amplifiers. One specific point of this experiment is that with Internet fibers, we have a very limited control on the attenuation and noise. For instance the Erbium fiber doped bidirectional amplifiers gain is drastically limited to avoid lasing oscillations due to parasitic reflections due to connectors, splices and more fundamental Rayleigh backscattering. Nevertheless the results are comparable with those obtained with dedicated fibers. Figure 1 shows the measured fractional frequency stability, we obtain 6×10-15 at 1 s and below 10-18 after 10000 second integration time. Such optical link will enable a broad range of high-sensitivity measurements, including the search for fundamental constants variation and gravitational mapping. This concept of fiber link has been very recently used to implement a giant fiber gyroscope [3]

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)May 1, 20131 citation

Study of optical frequency transfer via fiber

Jie Liu, Jing Gao, Guanjun Xu +6 more

Optical clocks are considered as promising candidates for redefining the second in the International System of Units. Compared with microwave clocks, optical clocks are powerful tools for the fundamental research such as the constancy of the fundamental constants, the validity of Einstein’s theory of general relativity, and the predictions of quantum electrodynamics. Recently two research groups have demonstrated the optical clocks with an unprecedented precision level of 10-18, which is two orders better than the present primary frequency standard. Using two Sr optical clocks and three Cs fountain clocks, SYRTE group has demonstrated the definition of second with optical clocks.#br#For redefining the second with optical clocks in the future, the optical clocks from the remote laboratories should have a high precision and the frequency of the optical clocks need to be transferred over a long distance, with extremely high precision. Unfortunately the conventional means of frequency transfer such as two-way satellite time and frequency transfer can reach a 10-16 level in one day which is far below the requirement for an optical clocks. Various methods have been developed to transfer optical frequency signal via optical fibers. Especially a research group from Germany has achieved a frequency transfer stability of 10-19 level in hundreds of seconds with a fiber length of 1840 km.#br#We demonstrate the recent development of optical frequency transfer over a 70-km fiber spool at National Time Service Center. The measurement shows that the compensation for the fiber noise is close to the limitation induced by the fiber delay for the Fourier frequency from 1 Hz to 250 Hz. The transfer stability (Allan deviation) of the fiber link is 1.2×10-15 in 1 s averaging time, and 1.4×10-18 in 10000 s. A preliminary test of the optical frequency transfer over a 100-km spooled fiber is achieved with a stability of roughly one order worse than the 71 km result, 5×10-15 in 1 s.#br#We demonstrate a new scheme of remote compensation for optical frequency transfer via fibers against conventional local compensation method. This new scheme has the advantage of great simplification of the local site, which can find applications in massive extension of star network. The key feature is that we transfer the mixture of the round-trip signal and local reference to the remote user’s end via an auxiliary fiber. At remote site, the fiber noise is measured and compensated by AOM2 accordingly.#br#Transfer stabilities of 13×10-15 in 1 s averaging time and 4.8×10-18 in 10000 s are achieved with the remote fiber noise compensation via a 25 km fiber spool. The demonstrated transfer stability is comparable to that obtained by the local fiber noise compensation method.#br#The future star fiber network of optical frequency transfer can benefit from this method, because the simpler local setup is required and even can be shared in the central site for multitudinous remote users.

Acta Physica SinicaJan 1, 20158 citations