Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Cascadable Digital Optical Logic Circuit Elements in the Visible and Infrared: Prospects for Fast Array Processors

Stuart D. Smith, Andy C. Walker, B. S. Wherrett

Published Jan 1, 1985• 0 citations
Publisher

Abstract

An extensive experimental and theoretical programme in our laboratory and in conjunction with a number of other European laboratories has now developed a series of optical circuit elements including optically bistable switches capable of steady state cw (operation) combined with external address for both visible and infrared wavelengths. The devices are sufficiently controllable that the characteristics may be varied to give bistable switches, bistable memories, latchable gates, resettable gates or analogue amplifying elements or transphasors.

DOI
10.1364/optcomp.1985.md2

Related papers

An introduction to optically bistable devices and photonic logic

Stanley Desmond Smith

Abstract The physical principles of the phenomenon of optical bistability are described and it is shown that a family of devices or ‘optical circuit elements can be realized including memories, logic gates and amplifiers. The current range of materials employed and of properties demonstrated is reviewed: it is concluded that with the present state of knowledge a primitive optical computer could be demonstrated and that other signal-processessing devices are likely to emerge.

Philosophical Transactions of the Royal Society of London Series A Mathematical and Physical Sciences•Dec 18, 1984•17 citations

Operating Curves for Optical Bistable Devices

P. Wheatley, John Edwin Midwinter

There is much interest in the use of optical bistable devices as logic gates for optical processors. Although desirable properties have been reported, it is difficult to see how these are offset by less desirable ones. All properties of the device can be controlled to a certain extent, principally by the bias conditions. Here we show how steady state and dynamic responses vary simultaneously with these parameters. These operating curves can be used to see the capabilities of a device or to choose the optimum bias conditions.

Topical Meeting on Photonic Switching•Jan 1, 1987•0 citations

Optical bistability, photonic logic, and optical computation

Stuart D. Smith

This paper presents new results and reviews the latest state of research in all-optical nonlinear logic switches, amplifiers, and memories. Optical circuit elements that perform the logic functions of the electronic computer are described. Switching speed on a picosecond time scale, the availability of fast high bandwidth consistent communication, and the application of optical parallelism in free space optical wiring are some advantages of the optical computing elements.

Applied Optics•May 15, 1986•126 citations

The Prospects For Optically Bistable Devices In Digital Optical Circuits For A Simple Optical Finite State Machine

Stanley Desmond Smith, Andrew Walker, Brian S. Wherrett +1 more

We review the physical principles underlying logic decision making and communication for both optics and electronics. Research directions towards demonstration machines are indicated using the experimentally proven properties of bistable memories, logic gates and optical transphasors. The demonstration of restoring optical logic, a 'lock and clock' architecture and of a simple finite state machine is described.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Feb 13, 1986•1 citation

Operating curves for optical bistable devices

P. J. Wheatley, John Edwin Midwinter

Optical bistable devices [1] are being developed with a view to their use as logic gates in optical processors [2]. The response of an optical bistable device is strongly nonlinear and once a device has been fabricated, its behaviour as a logic gate can still be modified to a large extent by the variation of certain parameters used to bias the device, Important responses include the device’s fanout potential, its switching speed and the contrast between its high and low output levels. Because of the complexity of the behaviour, it can be difficult to see how one response varies as another is improved. The method of ‘operating curves’ explained here allows a system designer to see how optimum performance may be attained.

IEE Proceedings J Optoelectronics•Dec 1, 1987•5 citations

Optical bistability — the promise of lightwave logic and switching

Lewis Holmes

The fundamental building blocks of digital ‘photonic’ no-wires-attached systems are now being created in research laboratories. Optically bistable devices may someday provide the means with which to build all-optical computers, but special-purpose communication processors and signal- and image-processing equipment are expected to benefit first

Electronics and Power•Jan 1, 1983•1 citation
An extensive experimental and theoretical programme in our laboratory and in conjunction with a number of other European laboratories has now developed a series of optical circuit elements including optically bistable switches capable of steady state cw (operation) combined with external address for both visible and infrared wavelengths. The devices are sufficiently controllable that the characteristics may be varied to give bistable switches, bistable memories, latchable gates, resettable gates or analogue amplifying elements or transphasors.
There is much interest in the use of optical bistable devices as logic gates for optical processors. Although desirable properties have been reported, it is difficult to see how these are offset by less desirable ones. All properties of the device can be controlled to a certain extent, principally by the bias conditions. Here we show how steady state and dynamic responses vary simultaneously with these parameters. These operating curves can be used to see the capabilities of a device or to choose the optimum bias conditions.
Optical bistable devices [1] are being developed with a view to their use as logic gates in optical processors [2]. The response of an optical bistable device is strongly nonlinear and once a device has been fabricated, its behaviour as a logic gate can still be modified to a large extent by the variation of certain parameters used to bias the device, Important responses include the device’s fanout potential, its switching speed and the contrast between its high and low output levels. Because of the complexity of the behaviour, it can be difficult to see how one response varies as another is improved. The method of ‘operating curves’ explained here allows a system designer to see how optimum performance may be attained.