Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Sensors Journal

Improved Resolution of Temperature Sensor Using Fast and Slow Light in a Fiber Resonator

Fan Wang, Yundong Zhang, Yanchen Qu, Siyu Lin, Xiaopeng Han

Published Jan 18, 2023• 3 citations
Publisher

Abstract

A novel scheme for improving the resolution of temperature sensor using fast and slow light in a fiber resonator is proposed and demonstrated experimentally. In the measurement system, the shift of resonance wavelength produced by the temperature change can be converted into strong variations of delay time. By measuring the delay time, this sensor we proposed has high-temperature sensitivity. Different from the traditional method of tracing spectrum, the temperature detection is carried out using an oscilloscope, which results in the sensor with fast response and high resolution. Moreover, the sensitivity, resolution, and measurement range of the sensor can be easily tuned by changing the${Q}$-factor of the resonator. Using this approach, we demonstrate temperature measurements at fiber resonators with low-${Q}$and high-${Q}$, respectively, as well as a$3.76\times 10^{-{4}}\,\,^{\circ }\text{C}$resolution and a 2706 ns/°C sensitivity of temperature sensing are obtained. The scheme is simple in structure and easy to implement, which is particularly suitable for detecting very small temperature changes.

DOI
10.1109/jsen.2023.3236481

Related papers

Improved Closed-Loop Slow-Light Temperature Sensor With Millidegree Resolution for Laser Cooling

Enkeleda Balliu, Lauris Talbot, Chun‐Wei Chen +7 more

For applications such as laser cooling of doped fibers, where it is critical to measure accurately the temperature of a cooled fiber that is very close to room temperature, it is paramount to develop a reliable, very short (mm) fiber temperature sensor with millikelvin resolution and very little drift. We report a second generation of a unique slow-light fiber Bragg grating (FBG) temperature sensor that meets these stringent requirements. Experiments and modeling establish that its temperature response depends only on well-known material constants of the silica FBG and the response of the probe laser’s wavelength controller. The response is independent of the linewidth of the slow-light resonance, hence different FBGs and/or resonances have the exact same response. Examples of measured cooling in optically pumped Yb-doped fibers show that more reliable thermal contact with the cooled fiber is obtained by wrapping the FBG and the cooled fiber.

International Conference on Optical Fiber Sensors (OFS)•Jan 1, 2023•4 citations

Long-Distance High-Precision and High-Sensitivity Time Delay Variation Sensing Based on Fiber-Optic Weak Measurements

Wei-Qian Zhao, Zu-En Su, Ya‐Fei Yu +1 more

In fiber-optic sensing, time delays induced by polarization mode dispersion can distort signals in systems relying on phase or intensity variations for measurement, degrading performance, especially in long distance, high-precision applications. To address this challenge, we propose a weak measurement-based scheme using intensity contrast ratio for high-precision, high-sensitivity fiber-optic time delay estimation under large inherent time delays. We demonstrate that a narrower light source bandwidth enhances the effective sensing distance for high-sensitivity measurements. Our results show that, even with large inherent time delays, the measurement precision and sensitivity remain comparable to those of biased weak measurement, enabling detection of time delay variations at the attosecond level, corresponding to a 25.5 Pa water pressure change. The scheme is also robust against fiber misalignment errors, offering a novel solution for long-distance distributed fiber-optic sensing and broadening the applications of weak measurement techniques.

Journal of Lightwave Technology•Apr 29, 2025•3 citations

Magnetic-field-assisted optical fiber quantum temperature sensor with enhanced sensitivity

Jiayao Chen, Yunhan Luo, Jiajia Luo +6 more

In recent years, utilizing nitrogen-vacancy color centers in diamond for temperature sensing has drawn great attention. However, increasing the sensitivity has encountered challenges due to the intrinsic temperature-dependent energy level shift, i.e., temperature responsivity, being limited to -74 kHz/K. In this Letter, we take advantage of the magnetic field to regulate the energy level to enhance temperature sensitivity. The sensor is formed by adhering a micron-sized diamond on the end face of an optical fiber, and a small magnet is mounted at a certain distance with the diamond exploiting a cured polydimethylsiloxane block as the bridge. The temperature change leads to the variation of the distance between the diamond and the magnet, thus affecting the magnetic strength felt by the diamond. This finally contributes an additional temperature-induced energy level shift, giving rise to an enhanced sensitivity. Experimental results demonstrated the proposed scheme and achieved a 4.2-fold improvement in the temperature responsivity and a 2.1-fold enhancement in sensitivity. Moreover, the diamond and the fiber-optic integrated structure improve the portability of the sensor.

Optics Letters•Feb 14, 2024•7 citations

Long-distance high-precision and high-sensitivity time delay sensing based on fiber optic weak measurements

Weiqian Zhao, Zu-En Su, Ya‐Fei Yu +1 more

In fiber optic sensing, time delays induced by polarization mode dispersion can distort signals in systems relying on phase or intensity variations for measurement, degrading performance, especially in long distance, high-precision applications. To address this challenge, we propose a weak measurement-based scheme using intensity contrast ratio for high-precision, high-sensitivity fiber optic delay estimation under large inherent time delays. We demonstrate that a narrower light source bandwidth enhances the effective sensing distance for high-sensitivity measurements. Our results show that, even with large inherent time delays, the measurement precision and sensitivity remain comparable to those of biased weak measurement, enabling detection of time delay variations at the attosecond level, corresponding to a 25.5 Pa water pressure change. The scheme is also robust against fiber misalignment errors, offering a novel solution for long-distance distributed fiber-optic sensing and broadening the applications of weak measurement techniques.

arXiv:2501.03589•Jan 7, 2025•0 citations

Tunable slow and fast light in a silicon-on-insulator Fano resonator

Tianqi Xu, Shaonan Zheng, Yang Qiu +5 more

Tunable slow and fast light generation in a silicon-on-insulator (SOI) Fano resonator is proposed and experimentally demonstrated. The slow and fast light generation with symmetric and asymmetric coupling conditions of the Fano resonator is theoretically analyzed. Under a slightly imbalanced coupling condition, the two output ports of the Fano resonator could produce a fast light and a slow light, respectively. By utilizing the thermo-optic (TO) effect to change the phase difference of the two optical beams coupled into the resonator, the transition of fast and slow light can be realized at the fixed resonance wavelength. Experimental results show that a slow-to-fast transition (group delay from 0.852 to -1.057 ns) at one resonance wavelength, and a fast-to-slow transition (group delay from -0.22 to 0.867 ns) at another resonance wavelength are realized simultaneously by controlling the microheater to tune the phase difference.

Optics Letters•Dec 7, 2022•6 citations

Enhancement of the sensitivity of a temperature sensor based on fiber Bragg gratings via weak value amplification

Luis José Salazar-Serrano, David Barrera, Waldimar Amaya +4 more

We present a proof-of-concept experiment aimed at increasing the sensitivity of temperature sensors implemented\nwith Fiber Bragg gratings by making use of a weak value amplification scheme. The technique requires\nonly linear optics elements for its implementation, and appears as a promising method for extending the range\nof temperatures changes detectable to increasingly lower values than state-of the-art sensors can currently\nprovide. The device implemented here is able to generate a shift of the centroid of the spectrum of a pulse of\n∼ 0.035 nm/◦C, a nearly fourfold increase in sensitivity over the same Fiber Bragg Grating system interrogated\nusing standard methods.

•Jan 1, 2015•54 citations
A novel scheme for improving the resolution of temperature sensor using fast and slow light in a fiber resonator is proposed and demonstrated experimentally. In the measurement system, the shift of resonance wavelength produced by the temperature change can be converted into strong variations of delay time. By measuring the delay time, this sensor we proposed has high-temperature sensitivity. Different from the traditional method of tracing spectrum, the temperature detection is carried out using an oscilloscope, which results in the sensor with fast response and high resolution. Moreover, the sensitivity, resolution, and measurement range of the sensor can be easily tuned by changing theQ{Q}Q-factor of the resonator. Using this approach, we demonstrate temperature measurements at fiber resonators with low-Q{Q}Qand high-Q{Q}Q, respectively, as well as a3.76×10−4  ∘C3.76\times 10^{-{4}}\,\,^{\circ }\text{C}3.76×10−4∘Cresolution and a 2706 ns/°C sensitivity of temperature sensing are obtained. The scheme is simple in structure and easy to implement, which is particularly suitable for detecting very small temperature changes.
For applications such as laser cooling of doped fibers, where it is critical to measure accurately the temperature of a cooled fiber that is very close to room temperature, it is paramount to develop a reliable, very short (mm) fiber temperature sensor with millikelvin resolution and very little drift. We report a second generation of a unique slow-light fiber Bragg grating (FBG) temperature sensor that meets these stringent requirements. Experiments and modeling establish that its temperature response depends only on well-known material constants of the silica FBG and the response of the probe laser’s wavelength controller. The response is independent of the linewidth of the slow-light resonance, hence different FBGs and/or resonances have the exact same response. Examples of measured cooling in optically pumped Yb-doped fibers show that more reliable thermal contact with the cooled fiber is obtained by wrapping the FBG and the cooled fiber.
In fiber-optic sensing, time delays induced by polarization mode dispersion can distort signals in systems relying on phase or intensity variations for measurement, degrading performance, especially in long distance, high-precision applications. To address this challenge, we propose a weak measurement-based scheme using intensity contrast ratio for high-precision, high-sensitivity fiber-optic time delay estimation under large inherent time delays. We demonstrate that a narrower light source bandwidth enhances the effective sensing distance for high-sensitivity measurements. Our results show that, even with large inherent time delays, the measurement precision and sensitivity remain comparable to those of biased weak measurement, enabling detection of time delay variations at the attosecond level, corresponding to a 25.5 Pa water pressure change. The scheme is also robust against fiber misalignment errors, offering a novel solution for long-distance distributed fiber-optic sensing and broadening the applications of weak measurement techniques.
In recent years, utilizing nitrogen-vacancy color centers in diamond for temperature sensing has drawn great attention. However, increasing the sensitivity has encountered challenges due to the intrinsic temperature-dependent energy level shift, i.e., temperature responsivity, being limited to -74 kHz/K. In this Letter, we take advantage of the magnetic field to regulate the energy level to enhance temperature sensitivity. The sensor is formed by adhering a micron-sized diamond on the end face of an optical fiber, and a small magnet is mounted at a certain distance with the diamond exploiting a cured polydimethylsiloxane block as the bridge. The temperature change leads to the variation of the distance between the diamond and the magnet, thus affecting the magnetic strength felt by the diamond. This finally contributes an additional temperature-induced energy level shift, giving rise to an enhanced sensitivity. Experimental results demonstrated the proposed scheme and achieved a 4.2-fold improvement in the temperature responsivity and a 2.1-fold enhancement in sensitivity. Moreover, the diamond and the fiber-optic integrated structure improve the portability of the sensor.
In fiber optic sensing, time delays induced by polarization mode dispersion can distort signals in systems relying on phase or intensity variations for measurement, degrading performance, especially in long distance, high-precision applications. To address this challenge, we propose a weak measurement-based scheme using intensity contrast ratio for high-precision, high-sensitivity fiber optic delay estimation under large inherent time delays. We demonstrate that a narrower light source bandwidth enhances the effective sensing distance for high-sensitivity measurements. Our results show that, even with large inherent time delays, the measurement precision and sensitivity remain comparable to those of biased weak measurement, enabling detection of time delay variations at the attosecond level, corresponding to a 25.5 Pa water pressure change. The scheme is also robust against fiber misalignment errors, offering a novel solution for long-distance distributed fiber-optic sensing and broadening the applications of weak measurement techniques.
Tunable slow and fast light generation in a silicon-on-insulator (SOI) Fano resonator is proposed and experimentally demonstrated. The slow and fast light generation with symmetric and asymmetric coupling conditions of the Fano resonator is theoretically analyzed. Under a slightly imbalanced coupling condition, the two output ports of the Fano resonator could produce a fast light and a slow light, respectively. By utilizing the thermo-optic (TO) effect to change the phase difference of the two optical beams coupled into the resonator, the transition of fast and slow light can be realized at the fixed resonance wavelength. Experimental results show that a slow-to-fast transition (group delay from 0.852 to -1.057 ns) at one resonance wavelength, and a fast-to-slow transition (group delay from -0.22 to 0.867 ns) at another resonance wavelength are realized simultaneously by controlling the microheater to tune the phase difference.
We present a proof-of-concept experiment aimed at increasing the sensitivity of temperature sensors implemented\nwith Fiber Bragg gratings by making use of a weak value amplification scheme. The technique requires\nonly linear optics elements for its implementation, and appears as a promising method for extending the range\nof temperatures changes detectable to increasingly lower values than state-of the-art sensors can currently\nprovide. The device implemented here is able to generate a shift of the centroid of the spectrum of a pulse of\n∼ 0.035 nm/◦C, a nearly fourfold increase in sensitivity over the same Fiber Bragg Grating system interrogated\nusing standard methods.