The ability to operate superconducting quantum computers at higher temperatures would greatly expand their utility and range of applications. This could be achieved by increasing resonance frequencies and/or utilizing collective modes that are less noisy and more robust against decoherence. We discuss several nonlinear resonator concepts in which the roles of linear and nonlinear elements are reversed vs. the transmon. The simplest version is a nonlinearLCresonator with a linear superconducting inductor and a nonlinear capacitor employing a nonlinear dielectric material. Due to progress in tunable dielectrics for 6G, some ferroelectric composites may enable operation of a nonlinear dielectric – superconductor qubit at hundreds of gigahertz. Other nonlinear dielectric materials include quantum paraelectrics and charge density wave materials. These are of interest due to robust collective modes resulting from macroscopically occupied states. Other proposed nonlinear resonators employing nonlinear dielectrics include quarter- and half-wavelength resonators. Voltage tunability is a potential feature of the proposed concepts.
The ability to operate superconducting quantum computers at higher temperatures would greatly expand their utility and range of applications. This could be achieved by increasing resonance frequencies and/or utilizing collective modes that are less noisy and more robust against decoherence. We discuss several nonlinear resonator concepts in which the roles of linear and nonlinear elements are reversed vs. the transmon. The simplest version is a nonlinearLCresonator with a linear superconducting inductor and a nonlinear capacitor employing a nonlinear dielectric material. Due to progress in tunable dielectrics for 6G, some ferroelectric composites may enable operation of a nonlinear dielectric – superconductor qubit at hundreds of gigahertz. Other nonlinear dielectric materials include quantum paraelectrics and charge density wave materials. These are of interest due to robust collective modes resulting from macroscopically occupied states. Other proposed nonlinear resonators employing nonlinear dielectrics include quarter- and half-wavelength resonators. Voltage tunability is a potential feature of the proposed concepts.
The key components in superconducting quantum computing architectures are qubits, couplers, microwave elements and low-noise amplifiers among others. In a variety of these subsystems, nonlinear circuit elements are an essential ingredient which enables their functionality. In this thesis, we study two different superconducting elements used to implement nonlinear capacitors. First we simulated a novel Josephson-junction-based tuneable nonlinear capacitor to couple flux qubits. Such a device implements a YY interaction, which has the potential to enhance the performance and extend the capabilities of current generation quantum annealers. We show that the interaction strength of the YY coupling is on the order of MHz and tuneable across zero. We discuss experimental realisations of this device to verify its function. Next, we present our study of a low temperature parametric amplifier utilizing the nonlinear capacitance of quantum phase-slip nanowires. We have fabricated a single-nanowire and two-nanowire variants which shunt a quarter-wavelength superconducting coplanar waveguide resonator. We characterised the nonlinear properties of the first variant such as the power-dependent resonance frequency, idler generation and signal gain, while in the second variant we developed a lock-in detection method to investigate the gate voltage response and demonstrate that the device acts as a gate-voltage-tuneable resonator. We also report on the progress towards a fabrication process for sputtered Al overlap junctions in the LCN cleanroom. Back-sputter and in-situ oxide growth techniques are developed as an alternative to shadow evaporation. These techniques are better suited for large-scale integration as they do not rely on angular deposition, but they require better control over the interfaces due to patterning the two electrodes separately. We characterised the processes using resistance measurements and characterised their low temperature properties. We show that our junctions exhibit overdamped dynamics and the critical current is suppressed with RF radiation.
Hybrid semiconductor-superconductor qubits have recently emerged as a promising alternative to traditional platforms, combining material advantages with device-level tunability. A defining feature is their gate-tunable Josephson coupling, enabling superconducting qubit architectures with full electric-field control and offering a path toward scalable, low-crosstalk quantum processors. This approach seeks to merge benefits of superconducting and semiconductor qubits, for instance by encoding quantum information in the spin of a quasiparticle occupying an Andreev bound state, thus combining long coherence times with fast, flexible control. Progress has accelerated through bottom-up engineering of Andreev states in coupled quantum dot arrays, leading to architectures such as minimal Kitaev chains hosting Majorana zero modes. In parallel, Hamiltonian-protected designs aim to enhance resilience against local noise and decoherence by exploiting superconducting phase dynamics and discrete charge or flux degrees of freedom. This article reviews recent theoretical and experimental advances in hybrid qubits, providing an overview of physical mechanisms, device implementations, and emerging architectures, with emphasis on their potential for (topologically) protected quantum information processing. While many designs remain at proof-of-concept stage, rapid progress suggests practical demonstrations may soon be achievable.
Hybrid quantum systems play an essential role in efforts towards the advancements of quantum information technology and quantum sensing by bridging distinct technological platforms. In particular, hybrid systems comprising superconducting microwave circuits are being pursued intensely in light of existing achievements in superconducting qubits and precise quantum control in microwave circuits. Their realization relies on the design of superconducting resonators capable of coupling to an oscillatory mode of a second quantum system, facilitating the probing and manipulation of one via the other. In order to accommodate the coupled system, its particular constraints and requirements must be respected, which may be quite extreme from the perspective of established superconducting circuit design and operation. Overcoming this challenge has proved to be a substantial obstacle for the attainment of strongly coupled hybrid systems, despite spectacular advances in superconducting microwave circuits individually. In this work, we examine two approaches tackling this issue for different hybrid quantum systems, focusing on the optimization and characterization of the superconducting circuits. The first device aims at a superconductor-atom hybrid system through the coupling to Rydberg-Rydberg transitions in ultra-cold Rb-87 atoms trapped near the superconducting chip. Using simulations in conjunction with theoretical considerations, we demonstrate a comprehensive geometry parameter optimization procedure for maximum coupling rate. Presenting an experimental implementation of the resulting circuit, we validate its suitability for use under the intended operation conditions, including the option of tuning the electronic transition frequencies using a dc voltage. Secondly, we investigate a device designed for applications in large magnetic in-plane fields used to mediate coupling to integrated micromechanical oscillators; more specifically it is a flux-tunable SQUID resonator comprising Josephson nano-constrictions as nonlinear inductive components. Performing a thorough characterization of its frequency and Kerr anharmonicity tuning behavior at fields up to several hundred mT, we discover a pronounced asymmetry in its flux response at large fields. We show this asymmetry to be caused by the nano-constrictions turning into Josephson diodes, develop an intuitive macroscopic model for its field-induced emergence and reconstruct the diode current-phase relation from the flux tuning data. Several figures of merit informing the suitability of the SQUID resonators for optomechanical systems as well as other applications are improved by the diode effect, highlighting the potential of Josephson diodes in superconducting microwave circuits. Our results provide a promising stepping stone for the advancement of hybrid systems involving superconducting microwave circuits, putting new and exciting operation and coupling regimes within reach.
Voltage-tunable superconductor-semiconductor devices offer a unique platform to realize dynamic tunability in superconducting quantum circuits. By galvanically connecting a gated InAs-Al Josephson junction to a coplanar waveguide resonator, we demonstrate the use of a superconducting element with wideband gate tunability. We show that the resonant frequency is controlled via a gate-tunable Josephson inductance and that the nonlinearity of the InAs-Al junction is nondissipative as is the case with conventional AlOx-Al junctions. As the gate voltage is decreased, the inductive participation of the junction increases up to $44\mathrm{%}$, resulting in the resonant frequency being tuned by over 2GHz. Utilizing the wide tunability of the device, we demonstrate that two resonant modes can be adjusted such that they strongly hybridize, exhibiting an avoided-level crossing with a coupling strength of 51MHz. Implementing such voltage-tunable resonators is the first step toward realizing wafer-scale continuous voltage control in superconducting circuits for qubit-qubit coupling, quantum limited amplifiers, and quantum memory platforms.
Superconducting microwave resonators and Josephson elements form the basis of a broad range of quantum information technologies, including circuit quantum electrodynamics, Josephson parametric amplification, bosonic quantum computing, and engineered interactions between microwave modes. The properties of these circuits are largely determined by material parameters and design geometry, while magnetic flux often provides a means of in situ control. Electrostatic gating offers an additional degree of freedom, motivating the investigation of gate-tunable superconducting circuits, particularly through the integration of superconductors with semiconductor elements.In this thesis, we investigate the gate tunability and nonlinear response of superconducting microwave resonators incorporating indium arsenide (InAs) nanowires with epitaxial aluminum (Al) shells. We explore two distinct forms of gate control in this platform: the modification of the superconducting properties of the Al shell and the electrostatic tuning of Andreev bound states (ABSs) in Josephson weak links defined in the InAs core.We characterize the first form of gate control by measuring the gate-induced changes in resonator frequency and internal losses. We demonstrate that the observed response is well described by the Mattis--Bardeen model using an effective-temperature approach, consistent with an increase in quasiparticle population. Time-domain and modulation measurements further reveal characteristic response times down to a few tens of nanoseconds, highlighting the potential of this mechanism for applications in cryogenic switching and superconducting electronics.We then investigate the ABS--resonator interaction in both the linear and nonlinear regimes, demonstrating coupling strengths approaching the ultrastrong-coupling regime and, most notably, gate and flux control over the ABS-induced Kerr and cubic nonlinearities. In particular, we show that the Kerr contribution can be tuned through zero while maintaining a finite cubic nonlinearity, and observe three-wave-mixing parametric amplification. These findings are particularly relevant for applications requiring three-wave mixing with suppressed Kerr effects, such as Josephson parametric amplification.Together, these results demonstrate the potential of hybrid superconductor--semiconductor devices for engineering gate-tunable microwave circuits and controlling their linear and nonlinear response.
Abstract Electronic devices that work in the quantum regime often employ hybrid nanostructures to bring about a nonlinear behaviour. The nonlinearity that these can provide has proven to be useful, in particular, for applications in quantum computation. Here we present a hybrid device that acts as a capacitor with a nonlinear charge–voltage relation. The device consists of a nanowire placed between the plates of a coplanar capacitor, with a co-parallel alignment. At low temperatures, due to the finite density of states on the nanowire, the charge distribution in the capacitor is uneven and energy-dependent, resulting in a charge-dependent effective capacitance. We study this system analytically and numerically, and show that the nonlinearity of the capacitance is significant enough to be utilized in circuit quantum electrodynamics. The resulting nonlinearity can be switched on, modulated, and switched off by an external potential, thus making this capacitive device highly versatile for uses in quantum computation.