In this paper, we address the secure data transmission through visible light communication (VLC) using physical layer security (PLS) techniques and particularly, optical beamforming with the zero-forcing algorithm. More precisely, we consider the secrecy capacity of classical multiple-input single-output VLC so that the system can deal with eavesdroppers by minimizing the secrecy outage probability (SOP). The considered wireless channel is modeled by the Gaussian distribution, which is subject to amplitude constraints. We quantity the achievable secrecy capacity and SOP for the conventional line-of-sight VLC link and show that how the beamforming can determine the optimal placement of the transmitters. We also show that for a given SOP, the proposed optimal placement offers a signal-to-noise ratio gain of up to 6 dB compared to classical methods such as uniform placement of the transmitters. Our numerical results indicate that the proposed optimal LED arrangement can achieve an SOP of $10^{-10}$ while the SOP with uniform arrangement is equal to $10^{-4}$.
In this paper, we address the secure data transmission through visible light communication (VLC) using physical layer security (PLS) techniques and particularly, optical beamforming with the zero-forcing algorithm. More precisely, we consider the secrecy capacity of classical multiple-input single-output VLC so that the system can deal with eavesdroppers by minimizing the secrecy outage probability (SOP). The considered wireless channel is modeled by the Gaussian distribution, which is subject to amplitude constraints. We quantity the achievable secrecy capacity and SOP for the conventional line-of-sight VLC link and show that how the beamforming can determine the optimal placement of the transmitters. We also show that for a given SOP, the proposed optimal placement offers a signal-to-noise ratio gain of up to 6 dB compared to classical methods such as uniform placement of the transmitters. Our numerical results indicate that the proposed optimal LED arrangement can achieve an SOP of 10−10 while the SOP with uniform arrangement is equal to 10−4.
Visible light communication (VLC) is a new enabling communication technology that exploits illumination devices, mostly high-brightness light-emitting diodes (LEDs), to establish high-speed short-range wireless communication links. VLC is a promising technology that has gained significant interest in the last decade due to its high data rates and low cost of deployment. Although VLC systems are less susceptible to eavesdropping than RF systems since light does not penetrate through walls, they become as vulnerable as their radio-frequency (RF) counterparts when their nodes are deployed in public areas and/or when there are large windows. Thus, security for VLC systems is as important as it is for RF systems. Security in wireless communication systems may be enhanced by introducing physical layer security (PLS) techniques. In fact, PLS has been applied to a wide range of RF applications in an effort to improve the overall security by complementing existing cryptography-based security techniques. The potential of PLS stems from its ability of leveraging features of the surrounding environments via sophisticated encoding techniques at the physical layer. Indeed, PLS schemes can be applied in the same spirit to VLC systems. \n \nThere exist many specificities that characterize VLC systems, leading to major differences compared to RF systems. Specifically, VLC channels are quasi-static and real valued channels, which seemingly simplify the application of PLS techniques. However, due to the limited dynamic range of the LEDs, VLC systems impose an amplitude constraint on the channel input, which makes unbounded inputs not admissible. As a result, the performance of PLS schemes must be revised in the VLC context due to its different operating constraints. \n \nWe propose in this thesis enhancing the secrecy performance of VLC systems through PLS techniques. Firstly, we consider the degraded single-input single-output (SISO) VLC system. We derive achievable secrecy rates using continuous and discrete input distributions and we demonstrate the substantial improvement in the secrecy performance by using discrete distributions. Secondly, we consider the multiple-input single-output (MISO) VLC systems. We consider at first the case of randomly located eavesdroppers, in which we develop an associated achievable secrecy rate and we develop a beamforming-based precoding scheme that enhances the secrecy performance of this class of systems. In the second part, we consider the multi-user (MU) MISO broadcast system with confidential messages and we develop linear precoding schemes that enhance typical secrecy performance measures, including the max-min fairness and the weighted fairness. Finally, we consider the multiple-input multiple-output (MIMO) VLC system. We derive achievable secrecy rates using continuous and discrete distributions and we develop linear precoding schemes that improve its secrecy performance.
Abstract The authors propose to arrange the light emitting diodes (LEDs) on the ceiling for an indoor visible light communication system in order to minimise the secrecy outage probability (SOP) at the location of the legitimate user (LU). More precisely, by deriving the secrecy capacity for a multiple‐input single‐output‐VLC system, we evaluate the SOP at the LU's location which is used as the appropriate metric to determine the position of the LEDs on the ceiling. To mitigate the effect of the eavesdropper, we derive the optimal beamforming coefficients which are used at the transmitter LED array with the aim of maximising the signal‐to‐noise ratio at the LU. Simulation results show that for a SOP of 10 −4 , the proposed SOP‐based LED arrangement with optimal beamforming offers up to 3 dB gain in transmit power compared to the classical uniform LED arrangement with sub‐optimal zero‐forcing beamforming. Moreover, they show that by using the proposed method, the SOP is kept below a desired threshold, over a wider area inside the indoor environment compared to classical methods.
Securing visible light communication (VLC) systems with physical-layer technologies has drawn increasing attention. In this paper, we leverage both transmit beamforming and jamming techniques to enhance communication secrecy for a multiple-input single-output (MISO) VLC system with presence of multiple eavesdroppers. The transmit beamformer and jamming precoder are jointly optimized in the sense that the signal-to-noise ratio (SNR) of the legitimate user is maximized subject to maximum SNR constraints imposed on eavesdroppers, as well as light-emitting diode (LED) optical power constraints. Despite the fact that the corresponding optimization problem has a nonconvex fractional form, we are able to determine its locally optimal solution via Charnes-Cooper transformation and minorization-maximization algorithm. Furthermore, we study the extension to a more complicated scenario where perfect channel state information at the transmitter (CSIT) is not available. The superiority of the proposed algorithms is finally verified via simulations.
This paper considers improving the confidentiality of visible light communication (VLC) links within the framework of physical-layer security. We study a VLC scenario with one transmitter, one legitimate receiver, and one eavesdropper. The transmitter has multiple light sources, while the legitimate and unauthorized receivers have a single photodetector, each. We characterize secrecy rates achievable via transmit beamforming over the multiple-input, single-output (MISO) VLC wiretap channel. For VLC systems, intensity modulation (IM) via light-emitting diodes (LEDs) is the most practical transmission scheme. Because of the limited dynamic range of typical LEDs, the modulating signal must satisfy certain amplitude constraints. Hence, we begin with deriving lower and upper bounds on the secrecy capacity of the scalar Gaussian wiretap channel subject to amplitude constraints. Then, we utilize beamforming to obtain a closed-form secrecy rate expression for the MISO wiretap channel. Finally, we propose a robust beamforming scheme to consider the scenario wherein information about the eavesdropper's channel is imperfect due to location uncertainty. A typical application of the proposed scheme is to secure the communication link when the eavesdropper is expected to exist within a specified area. The performance is measured in terms of the worst-case secrecy rate guaranteed under all admissible realizations of the eavesdropper's channel.
Visible-light communication (VLC) is an enabling technology that exploits the lighting infrastructure to provide ubiquitous indoor broadband coverage via high-speed short-range wireless communication links. On the other hand, physical-layer security has the potential to supplement conventional encryption methods with an additional secrecy measure that is provably unbreakable regardless of the computational power of the eavesdropper. The lack of wave-guiding transmission media in VLC channels makes the communication link inherently susceptible to eavesdropping by unauthorized users existing in areas illuminated by the data transmitters. In this thesis, we study transmission techniques that enhance the secrecy of VLC links within the framework of physical-layer security. Due to linearity limitations of typical light-emitting diodes (LEDs), the VLC channel is more accurately modelled with amplitude constraints on the channel input, rather than the conventional average power constraint. Such amplitude constraints render the prevalent Gaussian input distribution infeasible for VLC channels, making it difficult to obtain closed-form secrecy capacity expressions. Thus, we begin with deriving lower bounds on the secrecy capacity of the Gaussian wiretap channel subject to amplitude constraints. We then consider the design of optimal beamformers for secrecy rate maximization in the multiple-input single-output (MISO) wiretap channel under amplitude constraints. We show that the design problem is nonconvex and difficult to solve, however it can be recast as a solvable quasiconvex line search problem. We also consider the design of robust beamformers for worst-case secrecy rate maximization when channel uncertainty is taken into account. Finally, we study the design of linear precoders for the two-user MISO broadcast channel with confidential messages. We consider not only amplitude constraints, but also total and per-antenna average power constraints. We formulate the design problem as a nonconvex weighted secrecy sum rate maximization problem, and provide an efficient search algorithm to obtain a solution for such a nonconvex problem. We extend our approach to handle uncertainty in channel information. The design techniques developed throughout the thesis provide valuable tools for tackling real-world problems in which channel uncertainty is almost always inevitable and amplitude constraints are often necessary to accurately model hardware limitations.
This paper analyzes the secrecy rate and designs the secure beamforming for an indoor visible light communication (VLC) network consisting of one transmitter, one legitimate receiver, one eavesdropper, and several friendly jammers. In the VLC network, both the main and wiretapping channels have a uniformly distributed signal input and corrupted with additive white Gaussian noise. The imperfect channel state information (CSI) is considered by using the ellipsoidal approximation method. Under the amplitude constraints of the data and the interfering signal, the secrecy rate for the VLC network is analyzed. A beamforming optimization problem is proposed to maximize the secrecy rate with the given constraints. It is shown that the optimization problem is non-convex. In this paper, it is transformed into a solvable quasi-convex linear search problem. Numerical results demonstrate the performance gain of the optimal beamformer compared to the zero-forcing scheme. Moreover, the secrecy performance under different CSI uncertainties is also provided.