Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE International Conference on Engineering Veracruz (ICEV)

Superconducting qubits based on Al Josephson junctions and coplanar waveguide resonators

Daniel Rocha-Aguilera, Joel Molina Reyes, Gabriela Méndez‐Jerónimo

Published Oct 24, 2022• 1 citation
Publisher

Abstract

Superconducting qubits are one of the most promising candidates for the physical implementation of quantum computing. In this paper, a brief review of superconducting qubits based on Josephson tunnel junctions and coplanar waveguide resonators is presented, focusing on Al/Al2O3/Al junctions, fabrication techniques, and important areas of opportunity for these devices. Simulation results of Al-based MIM capacitor structures and coplanar waveguide resonators are presented as an initial approach to the study of these devices and the impact of certain design parameters on their performance.

DOI
10.1109/icev56253.2022.9959317

Related papers

A brief review on recent developments of superconducting microwave resonators for quantum device application

Yonuk Chong

Quantum information processing using superconducting qubit based on Josephson junction has become one of the most promising candidates for possible realization of a quantum computer. In the heart of the qubit circuits, the superconducting microwave resonator plays a key role in quantum operations and measurements, which enables single-photon level microwave quantum optics. During last decade, the coherence time, or the lifetime of the quantum state, of the superconducting qubit has been dramatically improved. Among several technological innovations, the improvement of superconducting microwave resonator's quality has been the main driving force in getting the qubit performance almost ready for elementary quantum computing architecture. In this paper, I will briefly review very recent progresses of the superconducting microwave resonators especially aimed for quantum device applications during the last decade. The progresses have been driven by ingenious circuit design, material improvement, and new measurement techniques. Even a rather radical idea of three-dimensional large resonators have been successfully implemented in a qubit circuit. All those efforts contributed to our understanding of the qubit decoherence mechanism and as a result to the improvement of qubit performance.

Progress in Superconductivity and Cryogenics•Dec 31, 2014•0 citations

Development of high quality superconducting resonators for quantum device applications

Dong-Gwang Ha, Seon Hoo Kim, So-Yeon Jun +5 more

We report our development on design, fabrication and characterization of various superconducting resonators for quantum device applications. The resonators are developed mainly for superconducting qubit implementation in circuit QED structure, but future application will include photon detectors such as microwave kinetic inductance detectors. First we designed and fabricated half-wavelength coplanar waveguide resonators with niobium thin film on a high resistive silicon wafer, with the fundamental frequencies in the range of 1 to 8 GHz. The loaded quality factors are controlled by the coupling capacitors, and the lower bound of the intrinsic quality factor was measured down to 7 mK in the dilution refrigerator. We have also designed quarter-wavelength resonators and lumped LC resonators coupled to a transmission line, and characterized multiple resonators in a single transmission line. For the 3D transmon qubit application, we designed and fabricated a rectangular box resonator with superconducting aluminum. The intrinsic quality factor of the box resonator exceeds three million at 7 mK. We will also present basic results on the integration of a transmon qubit in the superconducting resonator.

IEEE International Superconductive Electronics Conference (ISEC)•Jul 1, 2013•0 citations

Character and fabrication of Al/Al2O3/Al tunnel junctions for qubit application

DanDan Shen, Ran Zhu, Weiwei Xu +5 more

The superconductive Josephson junction is the key device for superconducting quantum computation. We have fabricated Al/Al2O3/Al tunnel junctions using a double angle evaporation method based on a suspended shadow mask. The Al2O3 junction barrier has been formed by introducing pure oxygen into the chamber during the fabrication process. We have adjusted exposure conditions by changing either the oxygen pressure or the oxidizing time during the formation of tunnel barriers to control the critical current density J c and the junction specific resistance R c . Measurements of the leakage in Al/Al2O3/Al tunnel junctions show that the devices are suitable for qubit applications.

Chinese Science Bulletin•Jan 20, 2012•18 citations

Wafer-Scale Fabrication Technologies for Integrated Superconducting Quantum Circuits

L. Kaczmarek, Matthias Schmelz, Katja Peiselt +4 more

In the upcoming decades quantum technologies, especially quantum computation, will have a strong influence on industrial, technological, economic, and social progress and are, therefore, considered to be one of the key technologies. The fundamental building blocks for quantum computation are quantum bits (qubits). The superconducting platform offers one of the most promising implementations due to its monolithic character and potential for scalability. Present research around the world primarily focusses on scaling up the number of qubits, so reliable wafer-scale fabrication technologies are mandatory. In this paper, we present our recent developments on wafer-scale fabrication of superconducting quantum circuits including Josephson junctions by the Manhattan-type technology. We discuss fabrication parameters as well as electrical characterization. For arrays out of 50 Josephson junctions with structure dimensions of 200 nm × 200 nm, we achieve a critical current standard deviation of approx. 3% on-chip and 7% on-wafer. We also show first measurement results of so fabricated transmon-type qubits with relaxation and decoherence times ofT1= 12.5 µs andT2= 15.0 µs, respectively. With an increasing number of superconducting qubits and, thus, their input and read-out lines, new challenges arise: Crosstalk between qubits, unwanted modes in the qubit environment, and required interconnections. One way to counteract is the implementation of low inductance connections across coplanar waveguides. This can be realized by aluminum air bridges. In this paper we discuss the air bridges’ fabrication parameters and the impact on the integrated circuits’ elements, e.g., Josephson junctions. We show electrical and superconducting measurements with critical temperatures and critical currents ofTc> 1.0 K andIc> 0.6 mA, respectively.

IEEE Transactions on Applied Superconductivity•Dec 13, 2024•5 citations

Two-Dimensional Material Tunnel Barrier for Josephson Junctions and Superconducting Qubits

Kan-Heng Lee, Srivatsan Chakram, Shi En Kim +8 more

Quantum computing based on superconducting qubits requires the understanding and control of the materials, device architecture, and operation. However, the materials for the central circuit element, the Josephson junction, have mostly been focused on using the AlO x tunnel barrier. Here, we demonstrate Josephson junctions and superconducting qubits employing two-dimensional materials as the tunnel barrier. We batch-fabricate and design the critical Josephson current of these devices via layer-by-layer stacking N layers of MoS 2 on the large scale. Based on such junctions, MoS 2 transmon qubits are engineered and characterized in a bulk superconducting microwave resonator for the first time. Our work allows Josephson junctions to access the diverse material properties of two-dimensional materials that include a wide range of electrical and magnetic properties, which can be used to study the effects of different material properties in superconducting qubits and to engineer novel quantum circuit elements in the future.

Nano Letters•Oct 29, 2019•42 citations

Superconducting Quantum Circuits Based on 2D Materials

Cheng-Han Lo, Yung‐Hsiang Chen, Avishma J. Lasrado +6 more

Transmon-type superconducting qubits have become a popular platform for quantum computing due to their robust qubit coherence properties. In recent years, different types of materials have been searched to replace the Al2O3 tunnel barrier in conventional Al-based Josephson junctions, in order to explore new functions of qubits utilizing the distinct nature of the chosen materials. In this report, we introduce our works involving using Weyl semimetals and graphene as a component in Josephson junctions for qubit designs and coupling to coplanar waveguide (CPW) resonators. We fabricate a MoTe2 transmon and investigate whether it exhibits topological properties by tuning the resonator frequency with magnetic flux. Next, we introduce a graphene gatemon, in which the gate-tunability of resonator frequency has been demonstrated and the two-tone spectroscopy has shown a qubit state transition.

SPIN•Aug 18, 2023•4 citations
Superconducting qubits are one of the most promising candidates for the physical implementation of quantum computing. In this paper, a brief review of superconducting qubits based on Josephson tunnel junctions and coplanar waveguide resonators is presented, focusing on Al/Al2O3/Al junctions, fabrication techniques, and important areas of opportunity for these devices. Simulation results of Al-based MIM capacitor structures and coplanar waveguide resonators are presented as an initial approach to the study of these devices and the impact of certain design parameters on their performance.
Quantum information processing using superconducting qubit based on Josephson junction has become one of the most promising candidates for possible realization of a quantum computer. In the heart of the qubit circuits, the superconducting microwave resonator plays a key role in quantum operations and measurements, which enables single-photon level microwave quantum optics. During last decade, the coherence time, or the lifetime of the quantum state, of the superconducting qubit has been dramatically improved. Among several technological innovations, the improvement of superconducting microwave resonator's quality has been the main driving force in getting the qubit performance almost ready for elementary quantum computing architecture. In this paper, I will briefly review very recent progresses of the superconducting microwave resonators especially aimed for quantum device applications during the last decade. The progresses have been driven by ingenious circuit design, material improvement, and new measurement techniques. Even a rather radical idea of three-dimensional large resonators have been successfully implemented in a qubit circuit. All those efforts contributed to our understanding of the qubit decoherence mechanism and as a result to the improvement of qubit performance.
We report our development on design, fabrication and characterization of various superconducting resonators for quantum device applications. The resonators are developed mainly for superconducting qubit implementation in circuit QED structure, but future application will include photon detectors such as microwave kinetic inductance detectors. First we designed and fabricated half-wavelength coplanar waveguide resonators with niobium thin film on a high resistive silicon wafer, with the fundamental frequencies in the range of 1 to 8 GHz. The loaded quality factors are controlled by the coupling capacitors, and the lower bound of the intrinsic quality factor was measured down to 7 mK in the dilution refrigerator. We have also designed quarter-wavelength resonators and lumped LC resonators coupled to a transmission line, and characterized multiple resonators in a single transmission line. For the 3D transmon qubit application, we designed and fabricated a rectangular box resonator with superconducting aluminum. The intrinsic quality factor of the box resonator exceeds three million at 7 mK. We will also present basic results on the integration of a transmon qubit in the superconducting resonator.
The superconductive Josephson junction is the key device for superconducting quantum computation. We have fabricated Al/Al2O3/Al tunnel junctions using a double angle evaporation method based on a suspended shadow mask. The Al2O3 junction barrier has been formed by introducing pure oxygen into the chamber during the fabrication process. We have adjusted exposure conditions by changing either the oxygen pressure or the oxidizing time during the formation of tunnel barriers to control the critical current density J c and the junction specific resistance R c . Measurements of the leakage in Al/Al2O3/Al tunnel junctions show that the devices are suitable for qubit applications.
In the upcoming decades quantum technologies, especially quantum computation, will have a strong influence on industrial, technological, economic, and social progress and are, therefore, considered to be one of the key technologies. The fundamental building blocks for quantum computation are quantum bits (qubits). The superconducting platform offers one of the most promising implementations due to its monolithic character and potential for scalability. Present research around the world primarily focusses on scaling up the number of qubits, so reliable wafer-scale fabrication technologies are mandatory. In this paper, we present our recent developments on wafer-scale fabrication of superconducting quantum circuits including Josephson junctions by the Manhattan-type technology. We discuss fabrication parameters as well as electrical characterization. For arrays out of 50 Josephson junctions with structure dimensions of 200 nm × 200 nm, we achieve a critical current standard deviation of approx. 3% on-chip and 7% on-wafer. We also show first measurement results of so fabricated transmon-type qubits with relaxation and decoherence times ofT1= 12.5 µs andT2= 15.0 µs, respectively. With an increasing number of superconducting qubits and, thus, their input and read-out lines, new challenges arise: Crosstalk between qubits, unwanted modes in the qubit environment, and required interconnections. One way to counteract is the implementation of low inductance connections across coplanar waveguides. This can be realized by aluminum air bridges. In this paper we discuss the air bridges’ fabrication parameters and the impact on the integrated circuits’ elements, e.g., Josephson junctions. We show electrical and superconducting measurements with critical temperatures and critical currents ofTc> 1.0 K andIc> 0.6 mA, respectively.
Quantum computing based on superconducting qubits requires the understanding and control of the materials, device architecture, and operation. However, the materials for the central circuit element, the Josephson junction, have mostly been focused on using the AlO x tunnel barrier. Here, we demonstrate Josephson junctions and superconducting qubits employing two-dimensional materials as the tunnel barrier. We batch-fabricate and design the critical Josephson current of these devices via layer-by-layer stacking N layers of MoS 2 on the large scale. Based on such junctions, MoS 2 transmon qubits are engineered and characterized in a bulk superconducting microwave resonator for the first time. Our work allows Josephson junctions to access the diverse material properties of two-dimensional materials that include a wide range of electrical and magnetic properties, which can be used to study the effects of different material properties in superconducting qubits and to engineer novel quantum circuit elements in the future.
Transmon-type superconducting qubits have become a popular platform for quantum computing due to their robust qubit coherence properties. In recent years, different types of materials have been searched to replace the Al2O3 tunnel barrier in conventional Al-based Josephson junctions, in order to explore new functions of qubits utilizing the distinct nature of the chosen materials. In this report, we introduce our works involving using Weyl semimetals and graphene as a component in Josephson junctions for qubit designs and coupling to coplanar waveguide (CPW) resonators. We fabricate a MoTe2 transmon and investigate whether it exhibits topological properties by tuning the resonator frequency with magnetic flux. Next, we introduce a graphene gatemon, in which the gate-tunability of resonator frequency has been demonstrated and the two-tone spectroscopy has shown a qubit state transition.