Abstract In this paper a nanofabrication process, based on a focused ion beam (FIB) nanosculpting technique, for high sensitivity three-dimensional nanoscale superconducting quantum interference devices (nanoSQUIDs) is reported. The crucial steps of the fabrication process are described, as are some peculiar features of the superconductor–normal metal–insulator–superconductor (SNIS) Josephson junctions, which may useful for applications in cryocooler systems. This fabrication procedure is employed to fabricate sandwich nanojunctions and high sensitivity nanoSQUIDs. Specifically, the superconductive nanosensors have a rectangular loop of 1 × 0.2–0.4 μ m 2 interrupted by two square Nb/Al–AlO x /Nb SNIS Josephson junctions with side lengths of 0.3 μ m. The characterization of a typical nanoSQUID has been carried out and a spectral density of magnetic flux noise as low as 0.8 μ Φ 0 Hz –1/2 has been measured.
Researches on the fabrication of ~ 0.1 × 0.1 μ m 2 superconductor–insulator–superconductor (SIS) Josephson junctions are reviewed. Today, a typical dimension is 1–10 μm for Josephson junctions in superconducting integrated circuits. These Josephson junctions are defined by well-established photolithographic technology with reactive ion etching (RIE), and for the superconductor, Nb is almost always used. The merits of Nb include the facts that the superconducting transition temperature Tc of Nb (9.2 K ) is higher than the boiling point of He (4.2 K ), and that Nb has excellent stability against thermal cycling between room temperature and liquid- He temperature. For the fabrication of ~ 0.1 × 0.1 μ m 2 junctions, on the other hand, there is a standard process with electron-beam lithography, shadow evaporation, and lift-off. This process works well for Al (Tc = 1.2 K ), however, it is not ideal for Nb . The scope of this brief review is the nanoscale junction with Nb electrodes. We will look at the efforts of optimizing the standard lift-off process for Nb , electron-beam-lithographic versions of the Nb Josephson-junction technology, focused-ion-beam (FIB) etching as a convenient alternative to electron-beam lithography and RIE, etc. In order to characterize nanoscale tunnel junctions, the single-charge transistor has been often fabricated. Therefore, a summary of its theoretical transport properties is also included.
This PhD Thesis is focused on the realization of superconducting quantum devices based on overdamped Nb/Al-AlOx/Nb SNIS (Superconductor - Normal metal - Insulator - Superconductor) tunneling Josephson junctions, interesting for several application fields (voltage metrology, digital electronics, radiation sensors, nanoSQUID, etc.). The challenges faced by quantum electronics and metrology are directing the new generations of devices towards smaller dimensions and higher levels of integration. Taking into account this requirement, the fabrication of SNIS-based devices has been addressed on downscaling the junction dimensions form the micro to the nanoscale. In particular, the effective area of junctions has been reduced exploiting three different lithographic techniques: the optical lithography to realize SNISs for a micrometer resolution, the Electron Beam Lithography (EBL) at the subµm and, finally, the Focused Ion Beam (FIB) sculpting method to achieve nanometer sizes. Specifically, prototypes have been realized exploiting the thin film technology, to guarantee a good control of electrical parameters of junctions, a higher reproducibility of their current-voltage I-V characteristics, and an accurate dimension control. Reliable and simpler fabrication processes have been implemented and validated, and the device downscaling was pursued without affecting the fundamental properties of SNIS junctions such as the non hysteretic I-V response and the skill on generating quantised voltage steps under radiofrequency irradiation. This work has thereby led to the definition and validation of a new generation of devices and processes down to the nanometer scale, and these approaches represent precious experiences of nanofabrication valuable for new research activities and projects
The overdamped Nb/Al-AlOx/Nb superconductor-normal metal-insulator-superconductor SNIS Josephson junctions recently developed at INRIM exhibit high values of critical current density and characteristic voltage, making these devices appealing both for metrology and digital electronics. High current densities could allow reduction of junction size, increasing the integration level. In this work authors present first results concerning the realization of sub-μm SNIS including a nanolithographic technique (Electron Beam Lithography, EBL) into the conventional process, to reduce junction dimensions. Fabrication and electrical parameters have been evaluated considering the scaling of the areas of junctions, furthermore RF and temperature behaviour have been studied.
Abstract In this Perspective article, we evaluate the current state of research on the use of focused electron and ion beams to directly fabricate nanoscale superconducting devices with application in quantum technologies. First, the article introduces the main superconducting devices and their fabrication by means of standard lithography techniques such as optical lithography and electron beam lithography. Then, focused ion beam patterning of superconductors through milling or irradiation is shown, as well as the growth of superconducting devices by means of focused electron and ion beam induced deposition. We suggest that the key benefits of these resist-free direct-growth techniques for quantum technologies include the ability to make electrical nanocontacts and circuit edit, fabrication of high-resolution superconducting resonators, creation of Josephson junctions and superconducting quantum interference device (SQUIDs) for on-tip sensors, patterning of high-Tc SQUIDs and other superconducting circuits, and the exploration of fluxtronics and topological superconductivity.
Controlling the Interface Properties of Submicrometric Nb/A– AlOx–Nb Josephson Junctions
Submicron Josephson devices are of a particular interest to the emerging field of quantum information, nanosized superconducting quantum interference devices (nano-SQUID) fabrication, AC voltage synthesis circuits for quantum metrology, etc. In this paper, we report on the development of our technology for producing non-hysteretic Nb/A-AlOx-Nb four-layered junctions with a diverse range of submicron dimensions, based on the focused ion beam (FIB) sculpting technique. We observed essential modifications of the main electrical characteristics as a result of the shrinking of the junction area, and relate them to the changes of the buried Nb/Al interface. We show that the electrical parameters-versus-temperature dependence can provide information on the quality of the junction interfaces. This aspect could be useful to better control of the entire fabrication process, allowing a further large-scale integration of Josephson nanodevices with improved transport characteristics.