Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of Physics Conference Series

Operation of a 4-bit RSFQ digital-to-analog converter based on a binary split-confluence configuration

Naonori Sega, Yuta Somei, Hiroshi Shimada, Yoshinao Mizugaki

Published Aug 1, 2022• 2 citations
Publisher

Abstract

Abstract One of the unique applications of single-flux-quantum (SFQ) circuitry is a digital-to-analog converter (DAC) of which the output voltage is defined by the Josephson effect. Recently, we have designed and operated rapid single-flux-quantum (RSFQ) DACs with frequency modulation of SFQ pulse sequences. In this paper, we report our design and test results of a 4-bit RSFQ-DAC based on the configuration of the “sum of selected bits sequence (Σ-SBS)”. By adjusting the timing margins, in addition to the fabrication using the Nb integration process with the critical current density as high as 10 kA/cm2, the maximum output voltage up to 260 μV was demonstrated.

DOI
10.1088/1742-6596/2323/1/012033

Related papers

9 bit superconductive single‐flux‐quantum digital‐to‐analogue converter

Yoshinao Mizugaki, Yasuyuki Takahashi, Hiroshi Shimada +1 more

The design and operation of a 9 bit superconductive single‐flux‐quantum (SFQ) digital‐to‐analogue converter (DAC) are presented. The DAC comprises a 9 bit variable SFQ pulse number multiplier and a 100‐fold voltage multiplier. An SFQ pulse‐frequency modulation technique is employed for coding the analogue output voltage. The DAC is fabricated using an Nb Josephson integration technology. Its output voltage waveform, the amplitude of which is up to 2.54 m V pp , is controlled by digital input signals from a room‐temperature data generator.

Electronics Letters•Oct 1, 2014•17 citations

100GHz operation of a 4-bit single-flux-quantum pulse-frequency modulator designed for bipolar D/A conversion

Yoshinao Mizugaki, Naonori Sega, Hiroshi Shimada

We designed and operated a 4-bit single-flux-quantum pulse-frequency modulator for bipolar D/A conversion. It was based on our previously-proposed “sum of selected bit sequence” configuration. Two functions, a synchronization scheme with a reference signal source and a complement number system for realization of bipolar output voltage, were implemented. A test circuit excluding the output analog stage (dual double-flux-quantum amplifier) was fabricated using a 10 kA/cm2 Nb/AlOx/Nb integration process. The synchronization function was evaluated in terms of the average voltages, which agreed well with the expected values. The bipolar D/A conversion was successfully emulated by using the positive and negative output signals. The maximum over-biased input voltage was determined to be 230 µV, of which the corresponding SFQ repetition frequency was 111 GHz.

IEICE Electronics Express•May 15, 2022•1 citation

Superconductor digital-to-analog converter based on processing of SFQ pulses

Vasili K. Semenov, P.N. Shevchenko, Yu. A. Polyakov

Recently we designed and successfully tested a prototype of a superconducting digital-to-analog converter (DAC) based on processing single flux quantum (SFQ) pulses. Two unique features make the device very attractive for metrology applications: (i) The generation of output voltage is based on the fundamentally accurate Josephson frequency-to-voltage relationship. (ii) The device does not require any external signals with frequencies higher than 100 MHz. It is expected that the DAC will be used as a key component of novel standards and calibrators of ac voltage with frequency up to 1 MHz. The implemented prototype has low magnitude of output voltage (about 10 mV) which is far lower than the 1 to 10 V target magnitude.

Conference on Precision Electromagnetic Measurements•Nov 27, 2002•9 citations

Design and Operation of 64-Fold Variable Single-Flux-Quantum Pulse-Number Multiplier

Yoshinao Mizugaki, Jun Saito, Masataka Moriya +1 more

One of the unique applications of the single-flux-quantum (SFQ) circuitry is a digital-to-analog converter (DAC) with fundamental accuracy based on the Josephson effect. Recently, we have proposed a DAC based on frequency modulation of the output SFQ pulse train. A variable SFQ pulse-number multiplier (PNM) is a key component for the frequency-modulation DAC. In this paper, we report our design and test of a variable PNM in which the multiplication factor is determined by the sum of selected SFQ trains coming from a series array of toggle flip-flops. A 64-fold variable PNM is designed and tested using chips based on Nb. The low-speed test shows its correct functions of variable multiplication of one- to 64-fold. The high-speed test demonstrates the operation of output SFQ repetition frequency up to 0.82 GHz for 64-fold multiplication.

IEEE Transactions on Applied Superconductivity•Oct 5, 2011•9 citations

Single-Flux-Quantum Bipolar Digital-to-Analog Converter Comprising Polarity-Switchable Double-Flux-Quantum Amplifier

Yoshinao Mizugaki, Tomoki Watanabe, Hiroshi Shimada

We present a single-flux-quantum (SFQ)-based digital-to-analog converter (DAC) generating bipolar output voltages, in which the key component is a polarity-switchable double-flux-quantum amplifier (PS-DFQA). The DAC comprised a dc/SFQ converter, an 8-bit variable pulse-number multiplier (PNM), and a ±8-fold PS-DFQA integrated on a single chip. SFQ pulse-frequency modulation was employed to realize variable output voltage amplitude, for which the multiplication factor of the variable-PNM was controlled by a commercial data generator situated at room temperature. The variable-PNM realized 8-bit resolution with a multiplication factor between 0 and 255. Bias currents fed to the ±8-fold PS-DFQA were polarity switched in synchronization with the digital code for the variable-PNM. The whole circuits including I/O elements were designed using SFQ cell libraries, and fabricated using a niobium integration process. Sinusoidal bipolar voltage waveform of 0.38 mVpp was demonstrated using a reference signal source of 43.94 MHz.

IEEE Transactions on Applied Superconductivity•Nov 7, 2016•2 citations

Single flux quantum digital devices

V. P. Koshelets

A new generation of the Josephson digital circuits-rapid single flux quantum (RSFQ) devices-based on overdamped externally shunted high quality Nb-AlO x -Nb tunnel junctions have been designed, fabricated and experimentally investigated. All-refractory material 11-layer 5 mu m integrated technology has been successfully employed for the preparation of the RSFQ microcircuits. The T flip-flop has been demonstrated to operate properly up to clock frequencies of 100 GHz at 25% margins. The proper operation of the buffer stage for a one-directional SFQ pulse transmission at clock frequencies up to 125 GHz has been achieved. The possibilities to convert the information from the usual DC form to SFQ and vice versa have been demonstrated. An output signal in an SFQ/DC converter as high as 220 mu V has been measured. A new counter type A/D converter which includes a comparator and reversible binary counter with DC outputs has been fabricated and tested. The proposed ADC seems to be very promising for high-accuracy measurement of medium-bandwidth signals. The possibilities of creating a number of SFQ devices with outstanding parameters are discussed.

Superconductor Science and Technology•Nov 1, 1991•5 citations
Abstract One of the unique applications of single-flux-quantum (SFQ) circuitry is a digital-to-analog converter (DAC) of which the output voltage is defined by the Josephson effect. Recently, we have designed and operated rapid single-flux-quantum (RSFQ) DACs with frequency modulation of SFQ pulse sequences. In this paper, we report our design and test results of a 4-bit RSFQ-DAC based on the configuration of the “sum of selected bits sequence (Σ-SBS)”. By adjusting the timing margins, in addition to the fabrication using the Nb integration process with the critical current density as high as 10 kA/cm2, the maximum output voltage up to 260 μV was demonstrated.
The design and operation of a 9 bit superconductive single‐flux‐quantum (SFQ) digital‐to‐analogue converter (DAC) are presented. The DAC comprises a 9 bit variable SFQ pulse number multiplier and a 100‐fold voltage multiplier. An SFQ pulse‐frequency modulation technique is employed for coding the analogue output voltage. The DAC is fabricated using an Nb Josephson integration technology. Its output voltage waveform, the amplitude of which is up to 2.54 m V pp , is controlled by digital input signals from a room‐temperature data generator.
We designed and operated a 4-bit single-flux-quantum pulse-frequency modulator for bipolar D/A conversion. It was based on our previously-proposed “sum of selected bit sequence” configuration. Two functions, a synchronization scheme with a reference signal source and a complement number system for realization of bipolar output voltage, were implemented. A test circuit excluding the output analog stage (dual double-flux-quantum amplifier) was fabricated using a 10 kA/cm2 Nb/AlOx/Nb integration process. The synchronization function was evaluated in terms of the average voltages, which agreed well with the expected values. The bipolar D/A conversion was successfully emulated by using the positive and negative output signals. The maximum over-biased input voltage was determined to be 230 µV, of which the corresponding SFQ repetition frequency was 111 GHz.
Recently we designed and successfully tested a prototype of a superconducting digital-to-analog converter (DAC) based on processing single flux quantum (SFQ) pulses. Two unique features make the device very attractive for metrology applications: (i) The generation of output voltage is based on the fundamentally accurate Josephson frequency-to-voltage relationship. (ii) The device does not require any external signals with frequencies higher than 100 MHz. It is expected that the DAC will be used as a key component of novel standards and calibrators of ac voltage with frequency up to 1 MHz. The implemented prototype has low magnitude of output voltage (about 10 mV) which is far lower than the 1 to 10 V target magnitude.
One of the unique applications of the single-flux-quantum (SFQ) circuitry is a digital-to-analog converter (DAC) with fundamental accuracy based on the Josephson effect. Recently, we have proposed a DAC based on frequency modulation of the output SFQ pulse train. A variable SFQ pulse-number multiplier (PNM) is a key component for the frequency-modulation DAC. In this paper, we report our design and test of a variable PNM in which the multiplication factor is determined by the sum of selected SFQ trains coming from a series array of toggle flip-flops. A 64-fold variable PNM is designed and tested using chips based on Nb. The low-speed test shows its correct functions of variable multiplication of one- to 64-fold. The high-speed test demonstrates the operation of output SFQ repetition frequency up to 0.82 GHz for 64-fold multiplication.
We present a single-flux-quantum (SFQ)-based digital-to-analog converter (DAC) generating bipolar output voltages, in which the key component is a polarity-switchable double-flux-quantum amplifier (PS-DFQA). The DAC comprised a dc/SFQ converter, an 8-bit variable pulse-number multiplier (PNM), and a ±8-fold PS-DFQA integrated on a single chip. SFQ pulse-frequency modulation was employed to realize variable output voltage amplitude, for which the multiplication factor of the variable-PNM was controlled by a commercial data generator situated at room temperature. The variable-PNM realized 8-bit resolution with a multiplication factor between 0 and 255. Bias currents fed to the ±8-fold PS-DFQA were polarity switched in synchronization with the digital code for the variable-PNM. The whole circuits including I/O elements were designed using SFQ cell libraries, and fabricated using a niobium integration process. Sinusoidal bipolar voltage waveform of 0.38 mVpp was demonstrated using a reference signal source of 43.94 MHz.
A new generation of the Josephson digital circuits-rapid single flux quantum (RSFQ) devices-based on overdamped externally shunted high quality Nb-AlO x -Nb tunnel junctions have been designed, fabricated and experimentally investigated. All-refractory material 11-layer 5 mu m integrated technology has been successfully employed for the preparation of the RSFQ microcircuits. The T flip-flop has been demonstrated to operate properly up to clock frequencies of 100 GHz at 25% margins. The proper operation of the buffer stage for a one-directional SFQ pulse transmission at clock frequencies up to 125 GHz has been achieved. The possibilities to convert the information from the usual DC form to SFQ and vice versa have been demonstrated. An output signal in an SFQ/DC converter as high as 220 mu V has been measured. A new counter type A/D converter which includes a comparator and reversible binary counter with DC outputs has been fabricated and tested. The proposed ADC seems to be very promising for high-accuracy measurement of medium-bandwidth signals. The possibilities of creating a number of SFQ devices with outstanding parameters are discussed.