Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Single-Flux-Quantum Bipolar Digital-to-Analog Converter Comprising Polarity-Switchable Double-Flux-Quantum Amplifier

Yoshinao Mizugaki, Tomoki Watanabe, Hiroshi Shimada

Published Nov 7, 2016• 2 citations
Publisher

Abstract

We present a single-flux-quantum (SFQ)-based digital-to-analog converter (DAC) generating bipolar output voltages, in which the key component is a polarity-switchable double-flux-quantum amplifier (PS-DFQA). The DAC comprised a dc/SFQ converter, an 8-bit variable pulse-number multiplier (PNM), and a ±8-fold PS-DFQA integrated on a single chip. SFQ pulse-frequency modulation was employed to realize variable output voltage amplitude, for which the multiplication factor of the variable-PNM was controlled by a commercial data generator situated at room temperature. The variable-PNM realized 8-bit resolution with a multiplication factor between 0 and 255. Bias currents fed to the ±8-fold PS-DFQA were polarity switched in synchronization with the digital code for the variable-PNM. The whole circuits including I/O elements were designed using SFQ cell libraries, and fabricated using a niobium integration process. Sinusoidal bipolar voltage waveform of 0.38 mVpp was demonstrated using a reference signal source of 43.94 MHz.

DOI
10.1109/tasc.2016.2625739

Related papers

Superconducting bipolar digital-to-analog converter equipped with dual double-flux-quantum amplifier

Yoshinao Mizugaki, Tomoki Watanabe, Hiroshi Shimada

Precise voltage generation is a unique feature of superconducting single-flux-quantum (SFQ) circuits, and hence, several SFQ-based digital-to-analog converters (DACs) have been designed for metrological applications. In this letter, we propose a dual double-flux-quantum amplifier (dual-DFQA) that extends DAC output voltage from unipolar to bipolar. An SFQ-based DAC comprising a 4-bit variable pulse number multiplier and a ±20-fold dual-DFQA is fabricated using a niobium integration technology. A 1-kHz, ±0.29-mV sinusoidal voltage waveform is successfully synthesized.

IEICE Electronics Express•Jan 1, 2016•5 citations

Modified Double-Flux-Quantum Amplifier for Bipolar Voltage Multiplication

Tomoki Watanabe, Hiroshi Shimada, Yoshinao Mizugaki

Single-flux-quantum (SFQ) circuits can generate highly accurate average voltage. We have developed SFQ digital-to-analog converters (DACs) for application of new ac voltage standards. In this paper, we present a bipolar voltage amplifier (BVA) based on a double flux quantum amplifier (DFQA) for generation of intrinsic bipolar voltage in an SFQ-DAC. The BVA realizes the identical multiplication factors for the positive and negative output, whereas the conventional DFQA has different multiplication factors in the bipolar output. The BVA can be used for the output stage of the SFQ- DAC. We have designed a 19-fold BVA and confirmed that the 19-fold BVA operated for input frequency of up to 31.2 GHz in positive voltage output and 33.6 GHz in negative voltage output.

IEEE International Superconductive Electronics Conference (ISEC)•Jul 1, 2015•4 citations

9 bit superconductive single‐flux‐quantum digital‐to‐analogue converter

Yoshinao Mizugaki, Yasuyuki Takahashi, Hiroshi Shimada +1 more

The design and operation of a 9 bit superconductive single‐flux‐quantum (SFQ) digital‐to‐analogue converter (DAC) are presented. The DAC comprises a 9 bit variable SFQ pulse number multiplier and a 100‐fold voltage multiplier. An SFQ pulse‐frequency modulation technique is employed for coding the analogue output voltage. The DAC is fabricated using an Nb Josephson integration technology. Its output voltage waveform, the amplitude of which is up to 2.54 m V pp , is controlled by digital input signals from a room‐temperature data generator.

Electronics Letters•Oct 1, 2014•17 citations

Design and Operation of a Double-Flux-Quantum Amplifier Excluding Flux Bias Lines

Yoshinao Mizugaki, Tomoki Watanabe

In addition to their fast switching with low power dissipation, precise voltage generation is a unique feature of single-flux-quantum (SFQ) circuits. This feature is attractive for realizing ac voltage standards consisting of SFQ-based digital-to-analog converters (DACs). Among several key components in SFQ-based DACs, a double-flux-quantum amplifier (DFQA) is a potential candidate to amplify the output voltage. In this paper, we present a redesigned DFQA without flux bias lines. We found a parameter set that provided wide bias margins and zero-flux-bias operation. Improved bias regions were numerically demonstrated, whereas a ±20-fold DFQA excluding flux biases was fabricated using Nb integration technology and tested in a liquid helium bath.

IEEE Transactions on Applied Superconductivity•May 10, 2016•2 citations

Design and Operation of 1000-fold Voltage Multiplier based on Double-flux-quantum Amplifier

Yusuke Sato, Masataka Moriya, Hiroshi Shimada +2 more

Rapid-single-flux-quantum digital-to-analogue converters (RSFQ-DACs) are now under development for ac voltage standard applications. The voltage multiplier (VM), which precisely amplifies the input voltage, is a key component for RSFQ-DACs. Because the amount of bias current for a conventional VM increases in proportion to its multiplication factor, we have been looking for a VM device which is operated on a different principle. In this paper, we report our design of a 1000-fold VM comprising double flux quantum amplifiers (DFQAs) of which the amount of bias current is independent of its multiplication factor. Test circuits were fabricated using a 2.5 kA/cm2 Nb process. We confirm that the experimental results demonstrate the 1000-fold operation up to 13.2 GHz input SFQ pulse repetition frequency.

Physics Procedia•Jan 1, 2013•14 citations

4-bit Bipolar Triangle Voltage Waveform Generator Using Single-Flux-Quantum Circuit

Tomoki Watanabe, Yoshitaka Takahashi, Hiroshi Shimada +2 more

SFQ digital-to-analog converters (DACs) are one of the candidates for AC voltage standards. We have proposed SFQ-DACs based on frequency modulation (FM). Bipolar output is required for applications of AC voltage standards, while our previous SFQ-DACs generated only positive voltages. In this paper, we present our design of a 4-bit bipolar triangle voltage waveform generator comprising an SFQ-DAC. The waveform generator has two output ports. Synthesized half-period waveforms are alternately generated in one of the output ports. The bipolar output is realized by observing the differential voltage between the ports. We confirmed a 72-μVPP bipolar triangle voltage waveform at the frequency of 35.7 Hz.

Physics Procedia•Jan 1, 2015•8 citations
We present a single-flux-quantum (SFQ)-based digital-to-analog converter (DAC) generating bipolar output voltages, in which the key component is a polarity-switchable double-flux-quantum amplifier (PS-DFQA). The DAC comprised a dc/SFQ converter, an 8-bit variable pulse-number multiplier (PNM), and a ±8-fold PS-DFQA integrated on a single chip. SFQ pulse-frequency modulation was employed to realize variable output voltage amplitude, for which the multiplication factor of the variable-PNM was controlled by a commercial data generator situated at room temperature. The variable-PNM realized 8-bit resolution with a multiplication factor between 0 and 255. Bias currents fed to the ±8-fold PS-DFQA were polarity switched in synchronization with the digital code for the variable-PNM. The whole circuits including I/O elements were designed using SFQ cell libraries, and fabricated using a niobium integration process. Sinusoidal bipolar voltage waveform of 0.38 mVpp was demonstrated using a reference signal source of 43.94 MHz.
Precise voltage generation is a unique feature of superconducting single-flux-quantum (SFQ) circuits, and hence, several SFQ-based digital-to-analog converters (DACs) have been designed for metrological applications. In this letter, we propose a dual double-flux-quantum amplifier (dual-DFQA) that extends DAC output voltage from unipolar to bipolar. An SFQ-based DAC comprising a 4-bit variable pulse number multiplier and a ±20-fold dual-DFQA is fabricated using a niobium integration technology. A 1-kHz, ±0.29-mV sinusoidal voltage waveform is successfully synthesized.
Single-flux-quantum (SFQ) circuits can generate highly accurate average voltage. We have developed SFQ digital-to-analog converters (DACs) for application of new ac voltage standards. In this paper, we present a bipolar voltage amplifier (BVA) based on a double flux quantum amplifier (DFQA) for generation of intrinsic bipolar voltage in an SFQ-DAC. The BVA realizes the identical multiplication factors for the positive and negative output, whereas the conventional DFQA has different multiplication factors in the bipolar output. The BVA can be used for the output stage of the SFQ- DAC. We have designed a 19-fold BVA and confirmed that the 19-fold BVA operated for input frequency of up to 31.2 GHz in positive voltage output and 33.6 GHz in negative voltage output.
The design and operation of a 9 bit superconductive single‐flux‐quantum (SFQ) digital‐to‐analogue converter (DAC) are presented. The DAC comprises a 9 bit variable SFQ pulse number multiplier and a 100‐fold voltage multiplier. An SFQ pulse‐frequency modulation technique is employed for coding the analogue output voltage. The DAC is fabricated using an Nb Josephson integration technology. Its output voltage waveform, the amplitude of which is up to 2.54 m V pp , is controlled by digital input signals from a room‐temperature data generator.
In addition to their fast switching with low power dissipation, precise voltage generation is a unique feature of single-flux-quantum (SFQ) circuits. This feature is attractive for realizing ac voltage standards consisting of SFQ-based digital-to-analog converters (DACs). Among several key components in SFQ-based DACs, a double-flux-quantum amplifier (DFQA) is a potential candidate to amplify the output voltage. In this paper, we present a redesigned DFQA without flux bias lines. We found a parameter set that provided wide bias margins and zero-flux-bias operation. Improved bias regions were numerically demonstrated, whereas a ±20-fold DFQA excluding flux biases was fabricated using Nb integration technology and tested in a liquid helium bath.
Rapid-single-flux-quantum digital-to-analogue converters (RSFQ-DACs) are now under development for ac voltage standard applications. The voltage multiplier (VM), which precisely amplifies the input voltage, is a key component for RSFQ-DACs. Because the amount of bias current for a conventional VM increases in proportion to its multiplication factor, we have been looking for a VM device which is operated on a different principle. In this paper, we report our design of a 1000-fold VM comprising double flux quantum amplifiers (DFQAs) of which the amount of bias current is independent of its multiplication factor. Test circuits were fabricated using a 2.5 kA/cm2 Nb process. We confirm that the experimental results demonstrate the 1000-fold operation up to 13.2 GHz input SFQ pulse repetition frequency.
SFQ digital-to-analog converters (DACs) are one of the candidates for AC voltage standards. We have proposed SFQ-DACs based on frequency modulation (FM). Bipolar output is required for applications of AC voltage standards, while our previous SFQ-DACs generated only positive voltages. In this paper, we present our design of a 4-bit bipolar triangle voltage waveform generator comprising an SFQ-DAC. The waveform generator has two output ports. Synthesized half-period waveforms are alternately generated in one of the output ports. The bipolar output is realized by observing the differential voltage between the ports. We confirmed a 72-μVPP bipolar triangle voltage waveform at the frequency of 35.7 Hz.