Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEICE Electronics Express

Superconducting bipolar digital-to-analog converter equipped with dual double-flux-quantum amplifier

Yoshinao Mizugaki, Tomoki Watanabe, Hiroshi Shimada

Published Jan 1, 2016• 5 citations
Publisher

Abstract

Precise voltage generation is a unique feature of superconducting single-flux-quantum (SFQ) circuits, and hence, several SFQ-based digital-to-analog converters (DACs) have been designed for metrological applications. In this letter, we propose a dual double-flux-quantum amplifier (dual-DFQA) that extends DAC output voltage from unipolar to bipolar. An SFQ-based DAC comprising a 4-bit variable pulse number multiplier and a ±20-fold dual-DFQA is fabricated using a niobium integration technology. A 1-kHz, ±0.29-mV sinusoidal voltage waveform is successfully synthesized.

DOI
10.1587/elex.13.20160242

Related papers

Single-Flux-Quantum Bipolar Digital-to-Analog Converter Comprising Polarity-Switchable Double-Flux-Quantum Amplifier

Yoshinao Mizugaki, Tomoki Watanabe, Hiroshi Shimada

We present a single-flux-quantum (SFQ)-based digital-to-analog converter (DAC) generating bipolar output voltages, in which the key component is a polarity-switchable double-flux-quantum amplifier (PS-DFQA). The DAC comprised a dc/SFQ converter, an 8-bit variable pulse-number multiplier (PNM), and a ±8-fold PS-DFQA integrated on a single chip. SFQ pulse-frequency modulation was employed to realize variable output voltage amplitude, for which the multiplication factor of the variable-PNM was controlled by a commercial data generator situated at room temperature. The variable-PNM realized 8-bit resolution with a multiplication factor between 0 and 255. Bias currents fed to the ±8-fold PS-DFQA were polarity switched in synchronization with the digital code for the variable-PNM. The whole circuits including I/O elements were designed using SFQ cell libraries, and fabricated using a niobium integration process. Sinusoidal bipolar voltage waveform of 0.38 mVpp was demonstrated using a reference signal source of 43.94 MHz.

IEEE Transactions on Applied Superconductivity•Nov 7, 2016•2 citations

Modified Double-Flux-Quantum Amplifier for Bipolar Voltage Multiplication

Tomoki Watanabe, Hiroshi Shimada, Yoshinao Mizugaki

Single-flux-quantum (SFQ) circuits can generate highly accurate average voltage. We have developed SFQ digital-to-analog converters (DACs) for application of new ac voltage standards. In this paper, we present a bipolar voltage amplifier (BVA) based on a double flux quantum amplifier (DFQA) for generation of intrinsic bipolar voltage in an SFQ-DAC. The BVA realizes the identical multiplication factors for the positive and negative output, whereas the conventional DFQA has different multiplication factors in the bipolar output. The BVA can be used for the output stage of the SFQ- DAC. We have designed a 19-fold BVA and confirmed that the 19-fold BVA operated for input frequency of up to 31.2 GHz in positive voltage output and 33.6 GHz in negative voltage output.

IEEE International Superconductive Electronics Conference (ISEC)•Jul 1, 2015•4 citations

Design and Operation of a Double-Flux-Quantum Amplifier Excluding Flux Bias Lines

Yoshinao Mizugaki, Tomoki Watanabe

In addition to their fast switching with low power dissipation, precise voltage generation is a unique feature of single-flux-quantum (SFQ) circuits. This feature is attractive for realizing ac voltage standards consisting of SFQ-based digital-to-analog converters (DACs). Among several key components in SFQ-based DACs, a double-flux-quantum amplifier (DFQA) is a potential candidate to amplify the output voltage. In this paper, we present a redesigned DFQA without flux bias lines. We found a parameter set that provided wide bias margins and zero-flux-bias operation. Improved bias regions were numerically demonstrated, whereas a ±20-fold DFQA excluding flux biases was fabricated using Nb integration technology and tested in a liquid helium bath.

IEEE Transactions on Applied Superconductivity•May 10, 2016•2 citations

1000-Fold Double-Flux-Quantum Voltage Multiplier Employing Directional Propagation of Flux Quanta Through Asymmetrically Damped Junction Branches

Yoshinao Mizugaki, Yuma Arai, Tomoki Watanabe +1 more

Precise voltage generation is a unique feature of single-flux-quantum (SFQ) circuits, in addition to their high-speed digital signal processing with low power consumption. We investigated SFQ pulse-frequency modulation D/A converters for metrological applications. In our SFQ-based D/A converters, the maximum output voltage is determined by the maximum SFQ pulse-frequency at the pulse number multiplier, and by the voltage multiplication factor at the voltage multiplier. In this study, we present our new design for a double-flux-quantum amplifier (DFQA) that works as a quantum voltage multiplier. In the new parameter set, we tuned the damping parameters of the Josephson junctions to realize proper propagation of SFQ pulses. A 1000-fold DFQA designed with the new parameter set was fabricated using a 25-μ A/μ m2Nb/AlOx/Nb integration technology. A 1000-fold voltage multiplication was confirmed for the input voltage up to 43 μV, with a corresponding SFQ repetition frequency of 21 GHz. That is, the output voltage reached 43 mV.

IEEE Transactions on Applied Superconductivity•Feb 13, 2019•5 citations

9 bit superconductive single‐flux‐quantum digital‐to‐analogue converter

Yoshinao Mizugaki, Yasuyuki Takahashi, Hiroshi Shimada +1 more

The design and operation of a 9 bit superconductive single‐flux‐quantum (SFQ) digital‐to‐analogue converter (DAC) are presented. The DAC comprises a 9 bit variable SFQ pulse number multiplier and a 100‐fold voltage multiplier. An SFQ pulse‐frequency modulation technique is employed for coding the analogue output voltage. The DAC is fabricated using an Nb Josephson integration technology. Its output voltage waveform, the amplitude of which is up to 2.54 m V pp , is controlled by digital input signals from a room‐temperature data generator.

Electronics Letters•Oct 1, 2014•17 citations

Superconductor digital-to-analog converter based on processing of SFQ pulses

Vasili K. Semenov, P.N. Shevchenko, Yu. A. Polyakov

Recently we designed and successfully tested a prototype of a superconducting digital-to-analog converter (DAC) based on processing single flux quantum (SFQ) pulses. Two unique features make the device very attractive for metrology applications: (i) The generation of output voltage is based on the fundamentally accurate Josephson frequency-to-voltage relationship. (ii) The device does not require any external signals with frequencies higher than 100 MHz. It is expected that the DAC will be used as a key component of novel standards and calibrators of ac voltage with frequency up to 1 MHz. The implemented prototype has low magnitude of output voltage (about 10 mV) which is far lower than the 1 to 10 V target magnitude.

Conference on Precision Electromagnetic Measurements•Nov 27, 2002•9 citations
Precise voltage generation is a unique feature of superconducting single-flux-quantum (SFQ) circuits, and hence, several SFQ-based digital-to-analog converters (DACs) have been designed for metrological applications. In this letter, we propose a dual double-flux-quantum amplifier (dual-DFQA) that extends DAC output voltage from unipolar to bipolar. An SFQ-based DAC comprising a 4-bit variable pulse number multiplier and a ±20-fold dual-DFQA is fabricated using a niobium integration technology. A 1-kHz, ±0.29-mV sinusoidal voltage waveform is successfully synthesized.
We present a single-flux-quantum (SFQ)-based digital-to-analog converter (DAC) generating bipolar output voltages, in which the key component is a polarity-switchable double-flux-quantum amplifier (PS-DFQA). The DAC comprised a dc/SFQ converter, an 8-bit variable pulse-number multiplier (PNM), and a ±8-fold PS-DFQA integrated on a single chip. SFQ pulse-frequency modulation was employed to realize variable output voltage amplitude, for which the multiplication factor of the variable-PNM was controlled by a commercial data generator situated at room temperature. The variable-PNM realized 8-bit resolution with a multiplication factor between 0 and 255. Bias currents fed to the ±8-fold PS-DFQA were polarity switched in synchronization with the digital code for the variable-PNM. The whole circuits including I/O elements were designed using SFQ cell libraries, and fabricated using a niobium integration process. Sinusoidal bipolar voltage waveform of 0.38 mVpp was demonstrated using a reference signal source of 43.94 MHz.
Single-flux-quantum (SFQ) circuits can generate highly accurate average voltage. We have developed SFQ digital-to-analog converters (DACs) for application of new ac voltage standards. In this paper, we present a bipolar voltage amplifier (BVA) based on a double flux quantum amplifier (DFQA) for generation of intrinsic bipolar voltage in an SFQ-DAC. The BVA realizes the identical multiplication factors for the positive and negative output, whereas the conventional DFQA has different multiplication factors in the bipolar output. The BVA can be used for the output stage of the SFQ- DAC. We have designed a 19-fold BVA and confirmed that the 19-fold BVA operated for input frequency of up to 31.2 GHz in positive voltage output and 33.6 GHz in negative voltage output.
In addition to their fast switching with low power dissipation, precise voltage generation is a unique feature of single-flux-quantum (SFQ) circuits. This feature is attractive for realizing ac voltage standards consisting of SFQ-based digital-to-analog converters (DACs). Among several key components in SFQ-based DACs, a double-flux-quantum amplifier (DFQA) is a potential candidate to amplify the output voltage. In this paper, we present a redesigned DFQA without flux bias lines. We found a parameter set that provided wide bias margins and zero-flux-bias operation. Improved bias regions were numerically demonstrated, whereas a ±20-fold DFQA excluding flux biases was fabricated using Nb integration technology and tested in a liquid helium bath.
Precise voltage generation is a unique feature of single-flux-quantum (SFQ) circuits, in addition to their high-speed digital signal processing with low power consumption. We investigated SFQ pulse-frequency modulation D/A converters for metrological applications. In our SFQ-based D/A converters, the maximum output voltage is determined by the maximum SFQ pulse-frequency at the pulse number multiplier, and by the voltage multiplication factor at the voltage multiplier. In this study, we present our new design for a double-flux-quantum amplifier (DFQA) that works as a quantum voltage multiplier. In the new parameter set, we tuned the damping parameters of the Josephson junctions to realize proper propagation of SFQ pulses. A 1000-fold DFQA designed with the new parameter set was fabricated using a 25-μ A/μ m2Nb/AlOx/Nb integration technology. A 1000-fold voltage multiplication was confirmed for the input voltage up to 43 μV, with a corresponding SFQ repetition frequency of 21 GHz. That is, the output voltage reached 43 mV.
The design and operation of a 9 bit superconductive single‐flux‐quantum (SFQ) digital‐to‐analogue converter (DAC) are presented. The DAC comprises a 9 bit variable SFQ pulse number multiplier and a 100‐fold voltage multiplier. An SFQ pulse‐frequency modulation technique is employed for coding the analogue output voltage. The DAC is fabricated using an Nb Josephson integration technology. Its output voltage waveform, the amplitude of which is up to 2.54 m V pp , is controlled by digital input signals from a room‐temperature data generator.
Recently we designed and successfully tested a prototype of a superconducting digital-to-analog converter (DAC) based on processing single flux quantum (SFQ) pulses. Two unique features make the device very attractive for metrology applications: (i) The generation of output voltage is based on the fundamentally accurate Josephson frequency-to-voltage relationship. (ii) The device does not require any external signals with frequencies higher than 100 MHz. It is expected that the DAC will be used as a key component of novel standards and calibrators of ac voltage with frequency up to 1 MHz. The implemented prototype has low magnitude of output voltage (about 10 mV) which is far lower than the 1 to 10 V target magnitude.