Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of Applied Physics

Optimized finite-time performance of endoreversible quantum Carnot machine working with a squeezed bath

Haoguang Liu, Jizhou He, Jianhui Wang

Published Jun 3, 2022• 7 citations
Publisher

Abstract

We consider a quantum endoreversible Carnot engine cycle and its inverse operation–Carnot refrigeration cycle, working between a hot bath of inverse temperature βh and a cold bath at inverse temperature βc. For the engine model, the hot bath is constructed to be squeezed, whereas for the refrigeration cycle, the cold bath is set to be squeezed. In the high-temperature limit, we analyze efficiency at maximum power and coefficient of performance at maximum figure of merit, revealing the effects of the times allocated to two thermal-contact and two adiabatic processes on the machine performance. We show that, when the total time spent along the two adiabatic processes is negligible, the efficiency at maximum power reaches its upper bound, which can be analytically expressed in terms of squeezing parameter r: ηana∗=1−sech[2r]1−ηC, with the Carnot efficiency ηC=1−βh/βc and the coefficient of performance at maximum figure of merit is bounded from the upper side by the analytical function: εana∗=1+εCsech[2r](1+εC)−εC−1, where εC=βh/(βc−βh).

DOI
10.1063/5.0091215

Related papers

Performance optimization on finite-time quantum Carnot engines and refrigerators based on spin-1/2 systems driven by a squeezed reservoir

Haoguang Liu, Jizhou He, Jianhui Wang

We investigate the finite-time performance of a quantum endoreversible Carnot engine cycle and its inverse operation — Carnot refrigeration cycle, employing a spin-1/2 system as the working substance. The thermal machine is alternatively driven by a hot boson bath of inverse temperature β h and a cold boson bath at inverse temperature β c (>β h). While for the engine model the hot bath is constructed to be squeezed, in the refrigeration cycle the cold bath is established to be squeezed, with squeezing parameter r. We obtain the analytical expressions for both efficiency and power in heat engines and for coefficient of performance and cooling rate in refrigerators. We find that, in the high-temperature limit, the efficiency at maximum power is bounded by the analytical value η + = 1 − sech ( 2 r ) ( 1 − η C ) , and the coefficient of performance at the maximum figure of merit is limited by ε + = sech ( 2 r ) ( 1 + ε C ) sech ( 2 r ) ( 1 + ε C ) − ε C − 1 , where η C = 1 – β h/β c and ε C = β h/(β c – β h) are the respective Carnot values of the engines and refrigerators. These analytical results are identical to those obtained from the Carnot engines based on harmonic systems, indicating that the efficiency at maximum power and coefficient at maximum figure of merit are independent of the working substance.

Chinese Physics B•Nov 11, 2022•7 citations

Finite-time performance of a quantum heat engine with a squeezed thermal bath

Jianhui Wang, Jizhou He, Yongli Ma

We consider the finite-time performance of a quantum Otto engine working between a hot squeezed and a cold thermal bath at inverse temperatures ${\ensuremath{\beta}}_{h}$ and ${\ensuremath{\beta}}_{c}(>{\ensuremath{\beta}}_{h})$ with $({k}_{B}\ensuremath{\equiv}1)\ensuremath{\beta}=1/T$. We derive the analytical expressions for work, efficiency, power, and power fluctuations, in which the squeezing parameter is involved. By optimizing the power output with respect to two frequencies, we derive the efficiency at maximum power as ${\ensuremath{\eta}}_{mp}={({\ensuremath{\eta}}_{C}^{\mathrm{gen}})}^{2}/[{\ensuremath{\eta}}_{C}^{\mathrm{gen}}\ensuremath{-}(1\ensuremath{-}{\ensuremath{\eta}}_{C}^{\mathrm{gen}})ln(1\ensuremath{-}{\ensuremath{\eta}}_{C}^{\mathrm{gen}})]$, where the generalized Carnot efficiency ${\ensuremath{\eta}}_{C}^{\mathrm{gen}}$ in the high-temperature or small squeezing limit simplifies to an analytic function of squeezing parameter $\ensuremath{\gamma}$: ${\ensuremath{\eta}}_{C}^{\mathrm{gen}}=1\ensuremath{-}{\ensuremath{\beta}}_{h}/[{\ensuremath{\beta}}_{c}cosh(2\ensuremath{\gamma})]$. Within the context of irreversible thermodynamics, we demonstrate that the expression of efficiency at maximum power satisfies a general form derived from nonlinear steady state heat engines. We show that, the power fluctuations are considerably increased, although the engine efficiency is enhanced by squeezing.

Physical review. E•Nov 20, 2019•39 citations

Optimization performance of quantum endoreversible Otto machines with dual-squeezed reservoirs

Haoguang 浩广 Liu 刘

Abstract We consider a quantum endoreversible Otto engine cycle and its inverse operation-Otto refrigeration cycle, employing two-level systems as the working substance and operating in dual-squeezed reservoirs. We demonstrate that the efficiency of heat engines at maximum work output and the coefficient of performance for refrigerators at the maximum χ criterion will degenerate to η − = η C/(2 – η C) and ε − = ( 9 + 8 ε C − 3 ) / 2 when symmetric squeezing is satisfied, respectively. We also investigated the influences of squeezing degree on the performance optimization of quantum Otto heat engines at the maximum work output and refrigerators at the maximum χ criterion. These analytical results show that the efficiency of heat engines at maximum work output and the coefficient of performance for refrigerators at the maximum χ criterion can be improved, reduced or even inhibited in asymmetric squeezing. Furthermore, we also find that the efficiency of quantum Otto heat engines at maximum work output is lower than that obtained from the Otto heat engines based on a single harmonic oscillator system. However, the coefficient of performance of the corresponding refrigerator is higher.

Chinese Physics B•Jul 12, 2024•3 citations

Efficiency at maximum power output of quantum heat engines under finite-time operation

Jianhui Wang, Jizhou He, Zhaoqi Wu

We study the efficiency at maximum power, ${\ensuremath{\eta}}_{m}$, of irreversible quantum Carnot engines (QCEs) that perform finite-time cycles between a hot and a cold reservoir at temperatures ${T}_{h}$ and ${T}_{c}$, respectively. For QCEs in the reversible limit (long cycle period, zero dissipation), ${\ensuremath{\eta}}_{m}$ becomes identical to the Carnot efficiency ${\ensuremath{\eta}}_{{}_{C}}=1\ensuremath{-}{T}_{c}/{T}_{h}$. For QCE cycles in which nonadiabatic dissipation and the time spent on two adiabats are included, the efficiency ${\ensuremath{\eta}}_{m}$ at maximum power output is bounded from above by ${\ensuremath{\eta}}_{{}_{C}}/(2\ensuremath{-}{\ensuremath{\eta}}_{{}_{C}})$ and from below by ${\ensuremath{\eta}}_{{}_{C}}/2$. In the case of symmetric dissipation, the Curzon-Ahlborn efficiency ${\ensuremath{\eta}}_{{}_{\mathit{CA}}}=1\ensuremath{-}\sqrt{{T}_{c}/{T}_{h}}$ is recovered under the condition that the time allocation between the adiabats and the contact time with the reservoir satisfy a certain relation.

arXiv:1111.5077•Physical Review E•Mar 29, 2012•66 citations

Efficiency at maximum power of a quantum Carnot engine with temperature tunable baths

Junjie Liu, Chang‐Yu Hsieh, Jianshu Cao

We investigate the efficiency at maximum power (EMP) of irreversible quantum Carnot engines that perform finite-time cycles between two temperature tunable baths. The temperature form we adopt can be experimentally realized in squeezed baths in the high temperature limit, which makes our proposal of practical relevance. Focusing on low dissipation engines, we first generalize the pervious upper as well as lower bounds for the EMP to temperature tunable cases in which they are solely determined by a generalized Carnot limit. As an illustrative example, we then consider a minimal heat engine model with a two-level spin as the working medium. It mimics a low dissipation engine as confirmed by finite time thermodynamic optimization results. The so-obtained EMP, being constrained by the generalized bounds, is well described by a generalized Curzon- Ahlborn efficiency as consequences of a left/right symmetry for a rate constant and low dissipations. Intriguing features of this minimal heat engine under optimal power output are also demonstrated.

arXiv:1710.06565•Oct 18, 2017•1 citation

Entropy Production in Quantum Heat Engines with Squeezed Reservoirs

Pavol Berger, Natalia Zizka, Andrej Molnar

Squeezed thermal reservoirs have been proposed as a route to boosting the efficiency and power of quantum heat engines beyond the standard Carnot bound, since squeezing injects an effective negative entropy that can, in principle, be converted into extra work. What remains poorly quantified is the entropy-production cost that driving a working qubit against a squeezed bath actually incurs once finite-time operation and reservoir decoherence are taken into account. We simulate a quantum Otto-cycle heat engine built from a two-level working system coupled alternately to a hot reservoir at temperature 4.2 K, squeezed with squeezing parameter r ranging from 0 to 1.2, and an unsqueezed cold reservoir at 0.8 K, integrating the Lindblad master equation across 42 combinations of squeezing parameter and cycle duration between 0.05 and 2.0 (in units of the inverse qubit gap). At r = 0, mean entropy production per cycle was 0.223 k_B, consistent with standard finite-time Otto-cycle behaviour, but rose to 0.361 k_B at r = 1.2, a 62% increase, even as extractable work per cycle increased by 41%, from 0.184 to 0.259 (in units of the qubit gap). The ratio of work output to entropy production, an effective thermodynamic figure of merit, was therefore not monotonic in squeezing: it peaked at r = 0.6, where work per unit entropy produced reached 0.98, 15% above the unsqueezed value of 0.85, before declining at higher squeezing as entropy production began to outpace the marginal work gain. Power output at the maximum-power cycle duration increased with squeezing across the full range tested, from 0.31 (gap units) at r = 0 to 0.52 at r = 1.2, a 68% gain, but efficiency at maximum power fell from 0.41 to 0.33 over the same range, a trade-off traced out in detail in Table 1. A decomposition of total entropy production attributed 58-71% to hot-bath coupling across all squeezing values, with the squeezed-bath contribution alone rising from undefined at r = 0 to 34% of hot-bath entropy production at r = 1.2, while coherence generated during the unitary strokes accounted for a comparatively stable 12-18% regardless of squeezing strength. These results indicate that reservoir squeezing in quantum heat engines delivers a genuine power and work advantage but at a non-negligible and squeezing-dependent entropy cost, with an intermediate squeezing level offering the best entropy-normalized performance rather than the strongest squeezing tested, a finding directly relevant to the design of squeezed-bath quantum thermal devices operating under realistic decoherence.

•Jun 15, 2026•0 citations
We consider a quantum endoreversible Carnot engine cycle and its inverse operation–Carnot refrigeration cycle, working between a hot bath of inverse temperature βh and a cold bath at inverse temperature βc. For the engine model, the hot bath is constructed to be squeezed, whereas for the refrigeration cycle, the cold bath is set to be squeezed. In the high-temperature limit, we analyze efficiency at maximum power and coefficient of performance at maximum figure of merit, revealing the effects of the times allocated to two thermal-contact and two adiabatic processes on the machine performance. We show that, when the total time spent along the two adiabatic processes is negligible, the efficiency at maximum power reaches its upper bound, which can be analytically expressed in terms of squeezing parameter r: ηana∗=1−sech[2r]1−ηC, with the Carnot efficiency ηC=1−βh/βc and the coefficient of performance at maximum figure of merit is bounded from the upper side by the analytical function: εana∗=1+εCsech2r−εC−1, where εC=βh/(βc−βh).
We investigate the finite-time performance of a quantum endoreversible Carnot engine cycle and its inverse operation — Carnot refrigeration cycle, employing a spin-1/2 system as the working substance. The thermal machine is alternatively driven by a hot boson bath of inverse temperature β h and a cold boson bath at inverse temperature β c (>β h). While for the engine model the hot bath is constructed to be squeezed, in the refrigeration cycle the cold bath is established to be squeezed, with squeezing parameter r. We obtain the analytical expressions for both efficiency and power in heat engines and for coefficient of performance and cooling rate in refrigerators. We find that, in the high-temperature limit, the efficiency at maximum power is bounded by the analytical value η + = 1 − sech ( 2 r ) ( 1 − η C ) , and the coefficient of performance at the maximum figure of merit is limited by ε + = sech ( 2 r ) ( 1 + ε C ) sech ( 2 r ) ( 1 + ε C ) − ε C − 1 , where η C = 1 – β h/β c and ε C = β h/(β c – β h) are the respective Carnot values of the engines and refrigerators. These analytical results are identical to those obtained from the Carnot engines based on harmonic systems, indicating that the efficiency at maximum power and coefficient at maximum figure of merit are independent of the working substance.
We consider the finite-time performance of a quantum Otto engine working between a hot squeezed and a cold thermal bath at inverse temperatures ${\ensuremath{\beta}}_{h}$ and ${\ensuremath{\beta}}_{c}(>{\ensuremath{\beta}}_{h})$ with $({k}_{B}\ensuremath{\equiv}1)\ensuremath{\beta}=1/T$. We derive the analytical expressions for work, efficiency, power, and power fluctuations, in which the squeezing parameter is involved. By optimizing the power output with respect to two frequencies, we derive the efficiency at maximum power as ${\ensuremath{\eta}}_{mp}={({\ensuremath{\eta}}_{C}^{\mathrm{gen}})}^{2}/[{\ensuremath{\eta}}_{C}^{\mathrm{gen}}\ensuremath{-}(1\ensuremath{-}{\ensuremath{\eta}}_{C}^{\mathrm{gen}})ln(1\ensuremath{-}{\ensuremath{\eta}}_{C}^{\mathrm{gen}})]$, where the generalized Carnot efficiency ${\ensuremath{\eta}}_{C}^{\mathrm{gen}}$ in the high-temperature or small squeezing limit simplifies to an analytic function of squeezing parameter $\ensuremath{\gamma}$: ${\ensuremath{\eta}}_{C}^{\mathrm{gen}}=1\ensuremath{-}{\ensuremath{\beta}}_{h}/[{\ensuremath{\beta}}_{c}cosh(2\ensuremath{\gamma})]$. Within the context of irreversible thermodynamics, we demonstrate that the expression of efficiency at maximum power satisfies a general form derived from nonlinear steady state heat engines. We show that, the power fluctuations are considerably increased, although the engine efficiency is enhanced by squeezing.
Abstract We consider a quantum endoreversible Otto engine cycle and its inverse operation-Otto refrigeration cycle, employing two-level systems as the working substance and operating in dual-squeezed reservoirs. We demonstrate that the efficiency of heat engines at maximum work output and the coefficient of performance for refrigerators at the maximum χ criterion will degenerate to η − = η C/(2 – η C) and ε − = ( 9 + 8 ε C − 3 ) / 2 when symmetric squeezing is satisfied, respectively. We also investigated the influences of squeezing degree on the performance optimization of quantum Otto heat engines at the maximum work output and refrigerators at the maximum χ criterion. These analytical results show that the efficiency of heat engines at maximum work output and the coefficient of performance for refrigerators at the maximum χ criterion can be improved, reduced or even inhibited in asymmetric squeezing. Furthermore, we also find that the efficiency of quantum Otto heat engines at maximum work output is lower than that obtained from the Otto heat engines based on a single harmonic oscillator system. However, the coefficient of performance of the corresponding refrigerator is higher.
We study the efficiency at maximum power, ${\ensuremath{\eta}}_{m}$, of irreversible quantum Carnot engines (QCEs) that perform finite-time cycles between a hot and a cold reservoir at temperatures Th{T}_{h}Th​ and Tc{T}_{c}Tc​, respectively. For QCEs in the reversible limit (long cycle period, zero dissipation), ${\ensuremath{\eta}}_{m}$ becomes identical to the Carnot efficiency ${\ensuremath{\eta}}_{{}_{C}}=1\ensuremath{-}{T}_{c}/{T}_{h}$. For QCE cycles in which nonadiabatic dissipation and the time spent on two adiabats are included, the efficiency ${\ensuremath{\eta}}_{m}$ at maximum power output is bounded from above by ${\ensuremath{\eta}}_{{}_{C}}/(2\ensuremath{-}{\ensuremath{\eta}}_{{}_{C}})$ and from below by ${\ensuremath{\eta}}_{{}_{C}}/2$. In the case of symmetric dissipation, the Curzon-Ahlborn efficiency ${\ensuremath{\eta}}_{{}_{\mathit{CA}}}=1\ensuremath{-}\sqrt{{T}_{c}/{T}_{h}}$ is recovered under the condition that the time allocation between the adiabats and the contact time with the reservoir satisfy a certain relation.
We investigate the efficiency at maximum power (EMP) of irreversible quantum Carnot engines that perform finite-time cycles between two temperature tunable baths. The temperature form we adopt can be experimentally realized in squeezed baths in the high temperature limit, which makes our proposal of practical relevance. Focusing on low dissipation engines, we first generalize the pervious upper as well as lower bounds for the EMP to temperature tunable cases in which they are solely determined by a generalized Carnot limit. As an illustrative example, we then consider a minimal heat engine model with a two-level spin as the working medium. It mimics a low dissipation engine as confirmed by finite time thermodynamic optimization results. The so-obtained EMP, being constrained by the generalized bounds, is well described by a generalized Curzon- Ahlborn efficiency as consequences of a left/right symmetry for a rate constant and low dissipations. Intriguing features of this minimal heat engine under optimal power output are also demonstrated.
Squeezed thermal reservoirs have been proposed as a route to boosting the efficiency and power of quantum heat engines beyond the standard Carnot bound, since squeezing injects an effective negative entropy that can, in principle, be converted into extra work. What remains poorly quantified is the entropy-production cost that driving a working qubit against a squeezed bath actually incurs once finite-time operation and reservoir decoherence are taken into account. We simulate a quantum Otto-cycle heat engine built from a two-level working system coupled alternately to a hot reservoir at temperature 4.2 K, squeezed with squeezing parameter r ranging from 0 to 1.2, and an unsqueezed cold reservoir at 0.8 K, integrating the Lindblad master equation across 42 combinations of squeezing parameter and cycle duration between 0.05 and 2.0 (in units of the inverse qubit gap). At r = 0, mean entropy production per cycle was 0.223 k_B, consistent with standard finite-time Otto-cycle behaviour, but rose to 0.361 k_B at r = 1.2, a 62% increase, even as extractable work per cycle increased by 41%, from 0.184 to 0.259 (in units of the qubit gap). The ratio of work output to entropy production, an effective thermodynamic figure of merit, was therefore not monotonic in squeezing: it peaked at r = 0.6, where work per unit entropy produced reached 0.98, 15% above the unsqueezed value of 0.85, before declining at higher squeezing as entropy production began to outpace the marginal work gain. Power output at the maximum-power cycle duration increased with squeezing across the full range tested, from 0.31 (gap units) at r = 0 to 0.52 at r = 1.2, a 68% gain, but efficiency at maximum power fell from 0.41 to 0.33 over the same range, a trade-off traced out in detail in Table 1. A decomposition of total entropy production attributed 58-71% to hot-bath coupling across all squeezing values, with the squeezed-bath contribution alone rising from undefined at r = 0 to 34% of hot-bath entropy production at r = 1.2, while coherence generated during the unitary strokes accounted for a comparatively stable 12-18% regardless of squeezing strength. These results indicate that reservoir squeezing in quantum heat engines delivers a genuine power and work advantage but at a non-negligible and squeezing-dependent entropy cost, with an intermediate squeezing level offering the best entropy-normalized performance rather than the strongest squeezing tested, a finding directly relevant to the design of squeezed-bath quantum thermal devices operating under realistic decoherence.