We report a novel real-time true random number generator based on Brillouin-enhanced FWM. Random bit sequences produced from the idler’s intensity fluctuation, due to position and time dependent stochastic birefringence changes, passed all NIST tests.
We propose a model of binary random number generator (RNG) based on a Brillouin optomechanical system. The device uses a hard excitation mode in a Brillouin optomechanical system, where thermal noise induces spontaneous transitions between two stable states in the hard excitation mode. We demonstrate the existence of an amplitude criterion for observing these transitions and show that the probability distribution of their occurrence in the non-generating and generating states can be precisely controlled by the amplitude of an external pump wave. At the same time, the use of a low-intensity seed wave allows for the control of the transition times between states. We demonstrate that the proposed random number generator successfully passes the standard tests NIST SP 800-22. The obtained result opens a way for development of an all-optical integrated True RNG, generating a sequence of random bits with equal probability.
High-speed physical random number generation is essential for secure communication, high-speed encryption and stochastic photonic information processing. However, scaling optical random number generators toward massively parallel operation remains challenging, because multiple wavelength channels generated from a common physical entropy source often suffer from residual correlation and limited spectral scalability. Here, we propose and experimentally demonstrate a dual-output, multi-channel parallel physical true random number generator based on a randomdistributed-feedback Brillouin fiber laser. Cascaded stimulated Brillouin scattering, four-wave mixing, cross-phase modulation and self-phase modulation in a highly nonlinear fiber, together with near-zero-dispersion assisted phase matching provided by a dispersion-shifted fiber, generate broadband Brillouin optical frequency combs spanning approximately 100 nm at both output ports. Distributed Rayleigh backscattering in a long single-mode fiber introduces stochastic phase perturbations and optical path delays, effectively breaking the fixed coherent relationship between output1 and output 2. The two outputs simultaneously exhibit broadbandcomb spectra, withoptical signal-to-noise ratio values of approximately 20 dB observed for the comb lines. The temporalcross-correlation coefficient between the two outputs remains below 0.05, forming two decorrelated optical entropy sources. Using 40 GSa/s sampling, 8-bit quantization, delay-reverse XOR decorrelation, and 4-LSB extraction, eight representative comb-line channels from the two output ports pass the NIST SP 800-22 statistical test suite. Based on the adopted offline post-processing procedure, these channels correspond to an effective aggregate random-bit rate of 1.92 Tb/s. The broadband spectra contain more than 1100 spectrally observable comb lines at each output port, indicating substantial potential for wavelength-parallel scaling. Under anideal fully parallel acquisition and processing architecture, the corresponding theoretical upper-bound aggregate rate could exceed 352 Tb/s (2200 × 4bit × 40GSa/s).
Abstract We demonstrate a fiber-optic source of random numbers in which random-number generation (RNG) is implemented via an inherently quantum process—detection of correlated photon pairs produced by spontaneous four-wave mixing (FWM) inside an optical fiber. The detection times of individual photon pairs, generated in our RNG scheme via phase-matched FWM in a highly nonlinear photonic-crystal fiber with a suitable dispersion profile, are converted into megabit-size binary sequences, serving as strings of random numbers. The randomness of these bit strings is verified by the National Institute of Standards and Technology Statistical Test Suite. We identify FWM regimes in which mode-locked short-pulse laser sources can provide a high peak power needed to drive photon-pair generation in optical fibers without an excessive loss of randomness due to unwanted patterns in the RNG photon-pair output.
A bidirectional pumping Brillouin random fiber laser based on a non-uniform fiber is proposed and demonstrated for truly random number generation with enhanced bit rate. Numerical simulation indicates that, thanks to the unique distributed Brillouin gain profile along the non-uniform fiber, random lasing oscillation within a broadband Brillouin gain can be established by the mutual effect of Brillouin scattering and enhanced Rayleigh scattering, providing physical entropy source for truly random number generation. The poof-of-concept experiments demonstrate a truly random number with a bit rate of 71 Mbps, which significantly breaks through the limitation of the intrinsic Brillouin bandwidth (~10 MHz) in communication fibers.