Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Scientific Reports

Weak spin-flip scattering in Pd89Ni11 interlayer of NbN-based ferromagnetic Josephson junctions

Duong Pham, Riku Sugimoto, Kenjiro Oba, Yuto Takeshita, Feng Li, Masamitsu Tanaka, Taro Yamashita, Akira Fujimaki

Published Apr 27, 2022• 17 citations
Publisher

Abstract

Abstract We studied niobium nitride (NbN)-based π-junctions with a diluted ferromagnetic Pd89Ni11 interlayer (NbN/PdNi/NbN junctions). In the NbN/PdNi/NbN junctions with various PdNi thicknesses, we observed a non-monotonic dependence of the critical currents on PdNi thickness, indicating the effects of the exchange interaction on the superconducting order parameter. From theoretical fitting of the experimental data, we found that the NbN/PdNi/NbN junctions showed a significantly smaller degree of spin-flip scattering in the PdNi interlayer than in the CuNi interlayer of NbN/CuNi/NbN junctions reported previously. The weak spin-flip scattering leads to a longer decay length of the Josephson critical current, so the critical currents were observed over a wide range of PdNi thicknesses (10–40 nm). We also fabricated superconducting quantum interference devices (SQUIDs) including the NbN/PdNi/NbN junction, using a PdNi thickness in which the π-state was expected. A half-flux-quantum shift, as evidence of the π-state, was observed in the magnetic field-dependent critical currents of the SQUIDs. This result represents an important step towards the practical application of NbN-based π-Josephson junctions.

DOI
10.1038/s41598-022-10967-6

Related papers

π phase shifter based on NbN-based ferromagnetic Josephson junction on a silicon substrate

Taro Yamashita, Sunmi Kim, Haruki Kato +4 more

In the field of superconducting electronics, a π phase shifter based on a ferromagnetic Josephson junction is expected to provide various advantages to classical and quantum superconducting devices. Here we report niobium nitride (NbN)-based ferromagnetic π junctions on a silicon (Si) substrate with a titanium nitride (TiN) buffer layer, which have applications to flux-bias-free flux quantum bits (qubits) and classical digital logic elements. We fabricated and characterized NbN/aluminum nitride (AlN)/NbN Josephson junctions, NbN/copper nickel (CuNi)/NbN ferromagnetic Josephson junctions, and superconducting quantum interference devices (SQUIDs) consisting of these junctions on the Si substrate. The fabricated NbN/AlN/NbN junctions showed a high junction quality suitable for qubit applications. Furthermore, the magnetic field dependence of the SQUID's critical current indicated that the NbN/CuNi/NbN junction worked as a π phase shifter on the Si substrate.

Scientific Reports•Aug 13, 2020•32 citations

Superconducting flux qubit with ferromagnetic Josephson π-junction operating at zero magnetic field

Sunmi Kim, Leonid Victorovich Abdurakhimov, Duong Pham +6 more

Conventional superconducting flux qubits require the application of a precisely tuned magnetic field to set the operation point at half a flux quantum through the qubit loop, which complicates the on-chip integration of this type of device. It has been proposed that by inducing a π-phase shift in the superconducting order parameter using a precisely controlled nanoscale-thickness superconductor/ferromagnet/superconductor Josephson junction, commonly referred to as π-junction, it is possible to realize a flux qubit operating at zero magnetic flux. Here, we report the realization of a zero-flux-biased flux qubit based on three NbN/AlN/NbN Josephson junctions and a NbN/PdNi/NbN ferromagnetic π-junction. The qubit lifetime is in the microsecond range, which we argue is limited by quasiparticle excitations in the metallic ferromagnet layer. Our results pave the way for developing quantum coherent devices, including qubits and sensors, that utilize the interplay between ferromagnetism and superconductivity. Conventional superconducting flux qubits require a finely tuned magnetic field to operate, hindering their on-chip integration. Here, ferromagnetic Josephson junctions with a π-phase shift in the superconducting order parameter allow the realization of a flux qubit operating at zero magnetic field.

arXiv:2401.14597•Communications Materials•Oct 11, 2024•26 citations

Ferromagnetic π Junctions on Niobium Four-Layer Structure for Superconductor Large-Scale Integrated Circuits

Akira Fujimaki, Daiki Hasegawa, Yuto Takeshita +3 more

We report a hybrid fabrication process for superconductor large-scale integrated circuits (ICs) with ferromagnetic π-shifted Josephson junctions (π junctions) and conventional 0 junctions. π junctions have a Nb/PdNi/Nb sandwich structure and are formed on the reliable Nb four-layer structure used for Nb/AlOx/Nb 0-junction-based ICs. The additional process for making π junctions causes little damage to the 0 junctions. The π phase shift for the superconducting macroscopic wave function is confirmed by forming 0-0-π SQUIDs that have two 0 junctions and one π junction in a superconducting loop. The π junction serves as the π phase shifter because the critical currents of the π junctions are much larger than those of the 0 junctions. The modulation patterns of the 0-0-π SQUIDs show a clear shift by the magnetic field corresponding to the half flux quantum (HFQ). The critical currents of the 0-0-π SQUIDs without fields, which are referred to as the nominal critical currents, are reduced depending on the product of the loop inductance and the critical current of the 0 junction. The nominal critical current reaches 1/5 of the critical current of the single 0 junction. The small values of the nominal critical currents contribute to the reduction of the power consumption in the HFQ circuit directly.

IEICE Transactions on Electronics•Feb 4, 2025•1 citation

Fabrication and Characterization of Miniaturized NbN Superconducting Quantum Interference Devices With Nanobridge Junctions

Hao Wang, Lei Chen, Xiaoyu Liu +4 more

Reduction of the size of the superconducting quantum interference device (SQUID) ring structure improves its sensitivity to magnetic moments. Nanobridge junctions are advantageous for SQUID miniaturization. However, many planar SQUIDs with nanobridge junctions have shallow flux modulation depths because of their nonideal Josephson current-phase relationships. Here, we fabricated a three-dimensional niobium nitride (NbN) miniaturized SQUID in which the nanobridge junction structures are much thinner than the superconducting ring. We grew a thick superconducting NbN film on a silicon wafer and embedded an insulating slit in the middle of the film. By setting two thin nanobridge junctions across this insulating slit, we were able to manufacture NbN miniaturized SQUIDs that, in principle, can become nano-SQUIDs. The flux modulation depths of these devices reached 36% at 4.2 K. In addition, the fabricated devices show reversible current-voltage characteristics in the absence of any shunting resistance.

IEEE Transactions on Applied Superconductivity•Jan 18, 2017•10 citations

Phase Sensitive Experiments in Ferromagnetic-Based Josephson Junctions

Wiebke Guichard, M. Aprili, Olivier Bourgeois +3 more

We have measured the ground state of ferromagnetic Josephson junctions using a single dc SQUID (superconducting quantum interference device).We show that the Josephson coupling is either positive (0 coupling) or negative (pi coupling) depending on the ferromagnetic layer thickness. As expected, the sign change of the Josephson coupling is observed as a shift of half a quantum flux in the SQUID diffraction pattern when operating in the linear limit.

Physical Review Letters•Apr 25, 2003•111 citations

NbN-based half-flux-quantum element for integration with superconducting qubits

Naoki Takeuchi, Mikiya Naruse, Shigeyuki Miyajima +4 more

Half-flux-quantum (HFQ) logic is a superconductor logic family comprising conventional Josephson junctions (0-JJs) and π Josephson junctions (π-JJs). The energy scale of HFQ logic can be flexibly reduced by phase shifts owing to π-JJs; thus, HFQ circuits are a promising building block for qubit interface circuits. In this study, we demonstrate an NbN-based HFQ circuit element compatible with NbN-based superconducting qubits for all-NbN monolithic integration of qubits and HFQ circuits. The use of NbN is beneficial for both qubits and HFQ circuits owing to its high-quality junctions and high kinetic inductance. First, we developed a prototype of an NbN-based 0-JJ/π-JJ hybrid fabrication process for designing HFQ circuits. We evaluated 0-JJs and π-JJs fabricated through the hybrid process, which demonstrated that the 0-JJs had a small deviation with regard to critical current density and the π-JJs had a sufficiently high critical current density to work as π phase shifters. Furthermore, we fabricated an HFQ superconducting quantum interference device, which is one of the most fundamental elements in HFQ circuits, and observed clear HFQ-period modulation in the magnetic flux dependence of the maximum current at 4.2 K.

Applied Physics Letters•Apr 8, 2024•4 citations
Abstract We studied niobium nitride (NbN)-based π-junctions with a diluted ferromagnetic Pd89Ni11 interlayer (NbN/PdNi/NbN junctions). In the NbN/PdNi/NbN junctions with various PdNi thicknesses, we observed a non-monotonic dependence of the critical currents on PdNi thickness, indicating the effects of the exchange interaction on the superconducting order parameter. From theoretical fitting of the experimental data, we found that the NbN/PdNi/NbN junctions showed a significantly smaller degree of spin-flip scattering in the PdNi interlayer than in the CuNi interlayer of NbN/CuNi/NbN junctions reported previously. The weak spin-flip scattering leads to a longer decay length of the Josephson critical current, so the critical currents were observed over a wide range of PdNi thicknesses (10–40 nm). We also fabricated superconducting quantum interference devices (SQUIDs) including the NbN/PdNi/NbN junction, using a PdNi thickness in which the π-state was expected. A half-flux-quantum shift, as evidence of the π-state, was observed in the magnetic field-dependent critical currents of the SQUIDs. This result represents an important step towards the practical application of NbN-based π-Josephson junctions.
In the field of superconducting electronics, a π phase shifter based on a ferromagnetic Josephson junction is expected to provide various advantages to classical and quantum superconducting devices. Here we report niobium nitride (NbN)-based ferromagnetic π junctions on a silicon (Si) substrate with a titanium nitride (TiN) buffer layer, which have applications to flux-bias-free flux quantum bits (qubits) and classical digital logic elements. We fabricated and characterized NbN/aluminum nitride (AlN)/NbN Josephson junctions, NbN/copper nickel (CuNi)/NbN ferromagnetic Josephson junctions, and superconducting quantum interference devices (SQUIDs) consisting of these junctions on the Si substrate. The fabricated NbN/AlN/NbN junctions showed a high junction quality suitable for qubit applications. Furthermore, the magnetic field dependence of the SQUID's critical current indicated that the NbN/CuNi/NbN junction worked as a π phase shifter on the Si substrate.
Conventional superconducting flux qubits require the application of a precisely tuned magnetic field to set the operation point at half a flux quantum through the qubit loop, which complicates the on-chip integration of this type of device. It has been proposed that by inducing a π-phase shift in the superconducting order parameter using a precisely controlled nanoscale-thickness superconductor/ferromagnet/superconductor Josephson junction, commonly referred to as π-junction, it is possible to realize a flux qubit operating at zero magnetic flux. Here, we report the realization of a zero-flux-biased flux qubit based on three NbN/AlN/NbN Josephson junctions and a NbN/PdNi/NbN ferromagnetic π-junction. The qubit lifetime is in the microsecond range, which we argue is limited by quasiparticle excitations in the metallic ferromagnet layer. Our results pave the way for developing quantum coherent devices, including qubits and sensors, that utilize the interplay between ferromagnetism and superconductivity. Conventional superconducting flux qubits require a finely tuned magnetic field to operate, hindering their on-chip integration. Here, ferromagnetic Josephson junctions with a π-phase shift in the superconducting order parameter allow the realization of a flux qubit operating at zero magnetic field.
We report a hybrid fabrication process for superconductor large-scale integrated circuits (ICs) with ferromagnetic π-shifted Josephson junctions (π junctions) and conventional 0 junctions. π junctions have a Nb/PdNi/Nb sandwich structure and are formed on the reliable Nb four-layer structure used for Nb/AlOx/Nb 0-junction-based ICs. The additional process for making π junctions causes little damage to the 0 junctions. The π phase shift for the superconducting macroscopic wave function is confirmed by forming 0-0-π SQUIDs that have two 0 junctions and one π junction in a superconducting loop. The π junction serves as the π phase shifter because the critical currents of the π junctions are much larger than those of the 0 junctions. The modulation patterns of the 0-0-π SQUIDs show a clear shift by the magnetic field corresponding to the half flux quantum (HFQ). The critical currents of the 0-0-π SQUIDs without fields, which are referred to as the nominal critical currents, are reduced depending on the product of the loop inductance and the critical current of the 0 junction. The nominal critical current reaches 1/5 of the critical current of the single 0 junction. The small values of the nominal critical currents contribute to the reduction of the power consumption in the HFQ circuit directly.
Reduction of the size of the superconducting quantum interference device (SQUID) ring structure improves its sensitivity to magnetic moments. Nanobridge junctions are advantageous for SQUID miniaturization. However, many planar SQUIDs with nanobridge junctions have shallow flux modulation depths because of their nonideal Josephson current-phase relationships. Here, we fabricated a three-dimensional niobium nitride (NbN) miniaturized SQUID in which the nanobridge junction structures are much thinner than the superconducting ring. We grew a thick superconducting NbN film on a silicon wafer and embedded an insulating slit in the middle of the film. By setting two thin nanobridge junctions across this insulating slit, we were able to manufacture NbN miniaturized SQUIDs that, in principle, can become nano-SQUIDs. The flux modulation depths of these devices reached 36% at 4.2 K. In addition, the fabricated devices show reversible current-voltage characteristics in the absence of any shunting resistance.
Half-flux-quantum (HFQ) logic is a superconductor logic family comprising conventional Josephson junctions (0-JJs) and π Josephson junctions (π-JJs). The energy scale of HFQ logic can be flexibly reduced by phase shifts owing to π-JJs; thus, HFQ circuits are a promising building block for qubit interface circuits. In this study, we demonstrate an NbN-based HFQ circuit element compatible with NbN-based superconducting qubits for all-NbN monolithic integration of qubits and HFQ circuits. The use of NbN is beneficial for both qubits and HFQ circuits owing to its high-quality junctions and high kinetic inductance. First, we developed a prototype of an NbN-based 0-JJ/π-JJ hybrid fabrication process for designing HFQ circuits. We evaluated 0-JJs and π-JJs fabricated through the hybrid process, which demonstrated that the 0-JJs had a small deviation with regard to critical current density and the π-JJs had a sufficiently high critical current density to work as π phase shifters. Furthermore, we fabricated an HFQ superconducting quantum interference device, which is one of the most fundamental elements in HFQ circuits, and observed clear HFQ-period modulation in the magnetic flux dependence of the maximum current at 4.2 K.