Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEJ Transactions on Fundamentals and Materials

Timing Controller for a Superconductor Microwave Switch using Adiabatic Quantum Flux Parametron Circuits

Hongxiang Shen, Naoki Takeuchi, Yuki Yamanashi, Nobuyuki Yoshikawa

Published Apr 30, 2022• 0 citations
Publisher

Abstract

We are developing a microwave pulse generator, whose pulse width and amplitude can be arbitrarily controlled, to manipulate superconducting quantum computing systems. The proposed microwave pulse generator is made using superconducting circuits. It can be placed at a 4.2 K or lower temperature stages to control a large-scale quantum computing system effectively. One of the key components of the microwave pulse generator is the timing controller, which generates trigger pulses for the microwave switch to start and stop the microwave irradiation. The target frequency of the microwave is 5 GHz, and the timing controller has to generate trigger pulses with a time resolution of several nanoseconds. We designed a 4-bit timing controller using an adiabatic quantum flux parametron (AQFP) circuit, which is extremely energy-efficient superconducting logic. The designed timing controller derives two trigger pulses, start and stop, to the microwave switch at the timing designated by digital data. We implemented the AQFP timing controller using the AIST HSTP process and demonstrated its operation at 1 GHz. Its power dissipation was estimated as about 1.25×10-9 W at 1 GHz.

DOI
10.1541/ieejfms.142.197

Related papers

Integrated digital system solution for superconducting quantum computing based on mK-generated single flux quantum pulse patterns for multi-qubit control

Thomas Ortlepp, Anna Reinhardt, Taghrid Haddad +1 more

Quantum technologies are today regarded as one of the key technologies with huge implications to technological, economic and social developments in the next decades. Among the different platforms, superconducting implementations represent one of the most promising and are therefore pursued by several research institutions but also by numerous high-tech companies. Current research focusses e.g. on scaling towards a large number of qubits needed for practical implementations of this technology. Amongst the various realizations, adiabatic quantum flux parametron (AQFP) circuits have shown lowest power dissipation reaching Landauer limit. The operation of AQFP circuits down to mK temperature has been recently demonstrated. We will present a new concept for a digital control circuit based on the microwave pulse patters generated by single flux quantum circuits operating at mK temperatures. We discuss the circuit operation and the integration together with superconducting qubits to a compact and scalable approach for multi-Qubit control by digital pulse patterns.

Quantum Computing, Communication, and Simulation•Mar 5, 2026•0 citations

Superconductor modulation circuits for Qubit control at microwave frequencies

Sasan Razmkhah, Ali Bozbey, Pascal Febvre

Readout and control of qubits are limiting factors in scaling quantum computers. An ideal solution is to integrate energy-efficient cryogenic circuits close to the qubits to perform control and pre-processing tasks. With orders of magnitude lower power consumption and hence lower noise, Single Flux Quantum (SFQ) and Adiabatic Quantum Flux Parametron (AQFP) superconductor logic families can reach ultimate performance at cryogenic temperatures. We have created a superconductor-based on-chip function generator to control qubits. The generated signal is modulated up to tens of GHz based on the external input waveform applied to the superconductor mixer stage. This circuit works at 4.2K. A radiofrequency (RF) matching circuit transmits the signal to the ~mK stage after digital amplification and noise reduction.

arXiv:2211.06667•Nov 12, 2022•3 citations

Scalable flux controllers using adiabatic superconductor logic for quantum processors

Naoki Takeuchi, Taiki Yamae, Wenhui Luo +3 more

Quantum processors have the potential to accelerate specific computing tasks but are difficult to scale up due to engineering limitations, such as the number of available cables and cooling power for dilution refrigerators for quantum bits (qubits). Hence, it is very important to develop scalable, energy-efficient interface circuits that can control many qubits via a few control lines inside a dilution refrigerator. One of the most important interface circuits is the flux controller (FC), which generates arbitrary dc flux bias to adjust the characteristics of component devices such as qubits. In this paper, we propose and demonstrate FCs using an energy-efficient superconductor logic family, adiabatic quantum-flux-parametron (AQFP) logic. We develop two types of FCs: the AQFP FC and the AQFP/single-flux-quantum (AQFP/SFQ) FC. Both FCs require only a few control lines and have extremely small power dissipation, thus exhibiting high scalability. Furthermore, the AQFP/SFQ FC can control flux bias using ballistic SFQ transmission, which is crucial for integration with qubits. As a proof of concept, we demonstrate AQFP and AQFP/SFQ FCs at 4.2 K, fabricated by the AIST high-speed standard process. Our results indicate that AQFP logic is highly suitable for use as qubit interface circuits for very large-scale quantum processors, especially from the viewpoint of the control line count, power dissipation, and amount of supply currents.

Physical Review Research•Feb 27, 2023•21 citations

Microwave-multiplexed qubit controller using adiabatic superconductor logic

Naoki Takeuchi, Taiki Yamae, Taro Yamashita +2 more

Abstract Cryogenic qubit controllers (QCs) are the key to build large-scale superconducting quantum processors. However, developing scalable QCs is challenging because the cooling power of a dilution refrigerator is too small (~10 μW at ~10 mK) to operate conventional logic families, such as complementary metal-oxide-semiconductor logic and superconducting single-flux-quantum logic, near qubits. Here we report on a scalable QC using an ultra-low-power superconductor logic family, namely adiabatic quantum-flux-parametron (AQFP) logic. The AQFP-based QC, referred to as the AQFP-multiplexed QC (AQFP-mux QC), produces multi-tone microwave signals for qubit control with an extremely small power dissipation of 81.8 pW per qubit. Furthermore, the AQFP-mux QC adopts microwave multiplexing to reduce the number of coaxial cables for operating the entire system. As a proof of concept, we demonstrate an AQFP-mux QC chip that produces microwave signals at two output ports through microwave multiplexing and demultiplexing. Experimental results show an output power of approximately −80 dBm and on/off ratio of ~40 dB at each output port. Basic mixing operation is also demonstrated by observing sideband signals.

arXiv:2310.06544•npj Quantum Information•Jun 3, 2024•28 citations

Implementation of SFQ Microwave Choppers for Controlling Quantum Bits

Shu Miura, Naoki Takeuchi, Yuki Yamanashi +1 more

In order to control the state of qubits by a microwave pulse, the irradiation time and the amplitude have to be controlled precisely. We have developed a single-flux-quantum (SFQ) microwave chopper for high-speed switching of microwave pulses. The proposed chopper is composed of a DC/SFQ convertor, an SFQ switch, a PTL driver, and a superconducting low-pass filter (LPF). The chopper converts an input microwave, which is generated by an external microwave generator at the room temperature, into microwave pulses by using start/stop SFQ control signals. We designed and implemented a microwave chopper module, which can be attached to dilution refrigerators. SFQ chips were fabricated using the ISTEC 2.5 kA/cm2 Nb process. We tested the microwave chopper module at 4.2 K, and demonstrated that a 5-GHz microwave whose amplitude ranging from 0 μV to 150 μV can be chopped by the SFQ control signals.

Physics Procedia•Jan 1, 2012•3 citations

Design and demonstration of an on-chip AC power source for adiabatic quantum-flux-parametron logic

Takashi Mukaiyama, Naoki Takeuchi, Yuki Yamanashi +1 more

Adiabatic quantum-flux-parametron (AQFP) logic is a promising technology for use in future high-end computers because its bit energy can be potentially reduced to the order of thermal energy. AQFP gates are driven by an AC bias current, which changes their potential energy adiabatically. In the present paper, we propose an on-chip AC power source, which is composed of a Josephson relaxation oscillator and a superconducting resonator, to drive the AQFP gates. We designed and implemented the AC power source using a Nb Josephson integrated circuit process. We confirmed that the AC power source can generate a 4.4 GHz sinusoidal current from a DC bias current and that the output amplitude of the AC power source can be controlled by varying the DC bias current.

Superconductor Science and Technology•Feb 6, 2013•8 citations
We are developing a microwave pulse generator, whose pulse width and amplitude can be arbitrarily controlled, to manipulate superconducting quantum computing systems. The proposed microwave pulse generator is made using superconducting circuits. It can be placed at a 4.2 K or lower temperature stages to control a large-scale quantum computing system effectively. One of the key components of the microwave pulse generator is the timing controller, which generates trigger pulses for the microwave switch to start and stop the microwave irradiation. The target frequency of the microwave is 5 GHz, and the timing controller has to generate trigger pulses with a time resolution of several nanoseconds. We designed a 4-bit timing controller using an adiabatic quantum flux parametron (AQFP) circuit, which is extremely energy-efficient superconducting logic. The designed timing controller derives two trigger pulses, start and stop, to the microwave switch at the timing designated by digital data. We implemented the AQFP timing controller using the AIST HSTP process and demonstrated its operation at 1 GHz. Its power dissipation was estimated as about 1.25×10-9 W at 1 GHz.
Quantum technologies are today regarded as one of the key technologies with huge implications to technological, economic and social developments in the next decades. Among the different platforms, superconducting implementations represent one of the most promising and are therefore pursued by several research institutions but also by numerous high-tech companies. Current research focusses e.g. on scaling towards a large number of qubits needed for practical implementations of this technology. Amongst the various realizations, adiabatic quantum flux parametron (AQFP) circuits have shown lowest power dissipation reaching Landauer limit. The operation of AQFP circuits down to mK temperature has been recently demonstrated. We will present a new concept for a digital control circuit based on the microwave pulse patters generated by single flux quantum circuits operating at mK temperatures. We discuss the circuit operation and the integration together with superconducting qubits to a compact and scalable approach for multi-Qubit control by digital pulse patterns.
Readout and control of qubits are limiting factors in scaling quantum computers. An ideal solution is to integrate energy-efficient cryogenic circuits close to the qubits to perform control and pre-processing tasks. With orders of magnitude lower power consumption and hence lower noise, Single Flux Quantum (SFQ) and Adiabatic Quantum Flux Parametron (AQFP) superconductor logic families can reach ultimate performance at cryogenic temperatures. We have created a superconductor-based on-chip function generator to control qubits. The generated signal is modulated up to tens of GHz based on the external input waveform applied to the superconductor mixer stage. This circuit works at 4.2K. A radiofrequency (RF) matching circuit transmits the signal to the ~mK stage after digital amplification and noise reduction.
Quantum processors have the potential to accelerate specific computing tasks but are difficult to scale up due to engineering limitations, such as the number of available cables and cooling power for dilution refrigerators for quantum bits (qubits). Hence, it is very important to develop scalable, energy-efficient interface circuits that can control many qubits via a few control lines inside a dilution refrigerator. One of the most important interface circuits is the flux controller (FC), which generates arbitrary dc flux bias to adjust the characteristics of component devices such as qubits. In this paper, we propose and demonstrate FCs using an energy-efficient superconductor logic family, adiabatic quantum-flux-parametron (AQFP) logic. We develop two types of FCs: the AQFP FC and the AQFP/single-flux-quantum (AQFP/SFQ) FC. Both FCs require only a few control lines and have extremely small power dissipation, thus exhibiting high scalability. Furthermore, the AQFP/SFQ FC can control flux bias using ballistic SFQ transmission, which is crucial for integration with qubits. As a proof of concept, we demonstrate AQFP and AQFP/SFQ FCs at 4.2 K, fabricated by the AIST high-speed standard process. Our results indicate that AQFP logic is highly suitable for use as qubit interface circuits for very large-scale quantum processors, especially from the viewpoint of the control line count, power dissipation, and amount of supply currents.
Abstract Cryogenic qubit controllers (QCs) are the key to build large-scale superconducting quantum processors. However, developing scalable QCs is challenging because the cooling power of a dilution refrigerator is too small (~10 μW at ~10 mK) to operate conventional logic families, such as complementary metal-oxide-semiconductor logic and superconducting single-flux-quantum logic, near qubits. Here we report on a scalable QC using an ultra-low-power superconductor logic family, namely adiabatic quantum-flux-parametron (AQFP) logic. The AQFP-based QC, referred to as the AQFP-multiplexed QC (AQFP-mux QC), produces multi-tone microwave signals for qubit control with an extremely small power dissipation of 81.8 pW per qubit. Furthermore, the AQFP-mux QC adopts microwave multiplexing to reduce the number of coaxial cables for operating the entire system. As a proof of concept, we demonstrate an AQFP-mux QC chip that produces microwave signals at two output ports through microwave multiplexing and demultiplexing. Experimental results show an output power of approximately −80 dBm and on/off ratio of ~40 dB at each output port. Basic mixing operation is also demonstrated by observing sideband signals.
In order to control the state of qubits by a microwave pulse, the irradiation time and the amplitude have to be controlled precisely. We have developed a single-flux-quantum (SFQ) microwave chopper for high-speed switching of microwave pulses. The proposed chopper is composed of a DC/SFQ convertor, an SFQ switch, a PTL driver, and a superconducting low-pass filter (LPF). The chopper converts an input microwave, which is generated by an external microwave generator at the room temperature, into microwave pulses by using start/stop SFQ control signals. We designed and implemented a microwave chopper module, which can be attached to dilution refrigerators. SFQ chips were fabricated using the ISTEC 2.5 kA/cm2 Nb process. We tested the microwave chopper module at 4.2 K, and demonstrated that a 5-GHz microwave whose amplitude ranging from 0 μV to 150 μV can be chopped by the SFQ control signals.
Adiabatic quantum-flux-parametron (AQFP) logic is a promising technology for use in future high-end computers because its bit energy can be potentially reduced to the order of thermal energy. AQFP gates are driven by an AC bias current, which changes their potential energy adiabatically. In the present paper, we propose an on-chip AC power source, which is composed of a Josephson relaxation oscillator and a superconducting resonator, to drive the AQFP gates. We designed and implemented the AC power source using a Nb Josephson integrated circuit process. We confirmed that the AC power source can generate a 4.4 GHz sinusoidal current from a DC bias current and that the output amplitude of the AC power source can be controlled by varying the DC bias current.