Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Physics Procedia

Implementation of SFQ Microwave Choppers for Controlling Quantum Bits

Shu Miura, Naoki Takeuchi, Yuki Yamanashi, Nobuyuki Yoshikawa

Published Jan 1, 2012• 3 citations
Publisher

Abstract

In order to control the state of qubits by a microwave pulse, the irradiation time and the amplitude have to be controlled precisely. We have developed a single-flux-quantum (SFQ) microwave chopper for high-speed switching of microwave pulses. The proposed chopper is composed of a DC/SFQ convertor, an SFQ switch, a PTL driver, and a superconducting low-pass filter (LPF). The chopper converts an input microwave, which is generated by an external microwave generator at the room temperature, into microwave pulses by using start/stop SFQ control signals. We designed and implemented a microwave chopper module, which can be attached to dilution refrigerators. SFQ chips were fabricated using the ISTEC 2.5 kA/cm2 Nb process. We tested the microwave chopper module at 4.2 K, and demonstrated that a 5-GHz microwave whose amplitude ranging from 0 μV to 150 μV can be chopped by the SFQ control signals.

DOI
10.1016/j.phpro.2012.06.155

Related papers

Design of an SFQ Microwave Chopper for Controlling Quantum Bits

G. Matsuda, Yuki Yamanashi, Nobuyuki Yoshikawa

A microwave chopper using single-flux-quantum (SFQ) circuits is proposed for the control of quantum bits (qubits). The proposed microwave chopper is composed of a DC/SFQ converter, an SFQ switch and a band-pass filter (BPF). In operation, an externally applied microwave is input to a DC/SFQ converter to generate an SFQ pulse train, which is chopped at high speed by the SFQ switch. The SFQ pulse train is then filtered by the BPF to remove higher harmonics. The transient response, the amplitude and the spectrum of the microwave output from the chopper were examined by circuit simulation, taking into account the thermal noise. The chopper was implemented using the SRL 2.5 kA/cm2Nb standard process and its characteristics were investigated. It was shown that the microwave output could be successfully chopped by the SFQ switch. The amplitude and line width of the microwave output were measured as 15 muV and 2 Hz at 7 GHz.

IEEE Transactions on Applied Superconductivity•Jun 1, 2007•14 citations

Design and Implementation of RSFQ Microwave Choppers for the Superconducting Quantum-Computing System

Naoki Takeuchi, Yuki Yamanashi, Nobuyuki Yoshikawa

We have been studying a superconducting quantum-computing system where superconducting qubits are controlled and read out by rapid single-flux- quantum (RSFQ) circuits. In this study, we designed and fabricated an RSFQ microwave chopper, which turns on and off an externally applied microwave to control qubit states with the time resolution of sub-nanosecond. The chopper is implemented in a microwave module and mounted in a dilution refrigerator. We tested the microwave chopper at 4.2K. The amplitude of the output microwave was approximately 100μV which is much larger than that of previously designed chopper. We also confirmed that the irradiation time can be controlled by RSFQ control circuits.

IEICE Transactions on Electronics•Jan 1, 2010•1 citation

Pulse-Density-Modulated Microwave Generator Using Single-Flux-Quantum Circuits for Controlling Qubits

Akira Kunihiro, Yuki Yamanashi, Nobuyuki Yoshikawa

Superconducting qubits are generally controlled by irradiation with microwave pulses. We propose a 5-GHz-range microwave pulse generator based on pulse density modulation for controlling qubits using single-flux-quantum (SFQ) circuits. The proposed microwave pulse generator comprises a 100-GHz circular shift register and a band-pass filter (BPF). In this study, we investigated the relationship between the target envelope of the microwave amplitude and the SFQ pulse density based on the transfer function for the BPF and the frequency spectrum of an SFQ pulse. We implemented a 64-bit circular shift register and demonstrated its operation up to 68 GHz.

IEEE Transactions on Applied Superconductivity•Mar 10, 2023•3 citations

Amplitude-controllable microwave pulse generator using single-flux-quantum pulse pairs for qubit control

Hongxiang Shen, Naoki Takeuchi, Yuki Yamanashi +1 more

Abstract To achieve large-scale quantum processors, cryogenic quantum-bit (qubit) interface circuits that can control qubits inside a dilution refrigerator are indispensable. Superconducting single-flux quantum (SFQ) circuits are a promising building block for qubit interface circuits because SFQ circuits can operate with high clock frequencies and low power dissipation. In the present study, we developed an SFQ-based qubit interface circuit that we refer to as a pulse-pair microwave pulse generator (PP-MPG). The PP-MPG can generate microwave pulses for qubit control, with the microwave amplitude controlled based on the delay between paired SFQ pulses. By finely adjusting the delay with delay controlling circuits, the microwave amplitude can be controlled over a wide range. We fabricated a PP-MPG chip and tested it at 4.2 K, showing that the microwave amplitude can be controlled over a range of approximately 30 dB. Our results show that the PP-MPG has the potential for use in future large-scale quantum processors.

Superconductor Science and Technology•Jul 19, 2023•9 citations

Low power single flux quantum qubit control circuit without high-frequency input

Bicong Weng, Wei Peng, Jie Ren

Abstract The use of high-frequency input signals from room-temperature microwave sources makes it difficult to scale up the number of quantum bits in universal quantum computers. To address this issue, superconducting single flux quantum (SFQ) integrated circuits are being explored as suitable candidates for qubit manipulation in universal quantum computers. This paper deals with a scalable SFQ qubit control circuit (SQCC) structure that requires only low-frequency input. The circuit mainly consists of a pulse generator and a counter, that output the SFQ pulse train with adjustable frequency and a controllable number of pulses, which is applicable to control single-qubit Clifford operations. The design of low-voltage rapid single flux quantum (LV-RSFQ) and energy-efficient rapid single flux quantum (ERSFQ) for the SQCC achieves low power consumption and provides a basis for scaling up SQCC to control more qubits. The proposed circuits are fabricated under the SIMIT-Nb03 process and successfully pass test verification. The achieved test results reveal that the adjustable output frequency ranges of the SQCC based on the LV-RSFQ and ERSFQ designs in order are [2.40, 8.11] GHz and [4.81, 5.14] GHz. In the operating frequency range, the circuit is able to generate the correct number of SFQ pulses under control. The controllable number range is from 1 to 128. When the circuits operate at 5 GHz, the total power consumptions of the above circuits in order are 23.88 μW and 6.2 μW. All input signals are low-frequency signals, which frees the control of large-scale qubits from limitations caused by high-frequency inputs produced by room-temperature microwave sources.

Superconductor Science and Technology•Jul 11, 2023•4 citations

Design of Single Flux Quantum Qubit Control Circuit With Adjustable Patterns

Bicong Weng, Yuxuan Feng, Liliang Ying +3 more

The use of high-frequency input signals from room-temperature microwave sources makes it difficult to scale up the number of quantum bits in universal quantum computers. To address this issue, superconducting single flux quantum (SFQ) integrated circuits are being explored as suitable candidates for qubit manipulation in universal quantum computers. Previously, we designed a low-power SFQ qubit control circuit (SQCC) to produce an equidistant SFQ pulse train without high-frequency input. It was reported that the fidelity of qubit control could be further improved if the pattern of SFQ pulse train could be adjustable. In this paper, we present optimized designs for different pattern requirements of qubit control, building upon the SQCC without high-frequency input. These designs feature segmented frequency modulation circuits, as well as circuits capable of outputting arbitrary patterns. The circuit capable of generating arbitrary patterns currently achieves a maximum adjustable number of 400, with a corresponding frequency output of 20 GHz. It has been successfully fabricated using the SIMIT Nb03 process and has passed functionality measurement tests. The optimized circuit opens up possibilities for improved qubit control and advancements in quantum computing applications.

IEEE Transactions on Applied Superconductivity•Jan 16, 2024•5 citations
In order to control the state of qubits by a microwave pulse, the irradiation time and the amplitude have to be controlled precisely. We have developed a single-flux-quantum (SFQ) microwave chopper for high-speed switching of microwave pulses. The proposed chopper is composed of a DC/SFQ convertor, an SFQ switch, a PTL driver, and a superconducting low-pass filter (LPF). The chopper converts an input microwave, which is generated by an external microwave generator at the room temperature, into microwave pulses by using start/stop SFQ control signals. We designed and implemented a microwave chopper module, which can be attached to dilution refrigerators. SFQ chips were fabricated using the ISTEC 2.5 kA/cm2 Nb process. We tested the microwave chopper module at 4.2 K, and demonstrated that a 5-GHz microwave whose amplitude ranging from 0 μV to 150 μV can be chopped by the SFQ control signals.
A microwave chopper using single-flux-quantum (SFQ) circuits is proposed for the control of quantum bits (qubits). The proposed microwave chopper is composed of a DC/SFQ converter, an SFQ switch and a band-pass filter (BPF). In operation, an externally applied microwave is input to a DC/SFQ converter to generate an SFQ pulse train, which is chopped at high speed by the SFQ switch. The SFQ pulse train is then filtered by the BPF to remove higher harmonics. The transient response, the amplitude and the spectrum of the microwave output from the chopper were examined by circuit simulation, taking into account the thermal noise. The chopper was implemented using the SRL 2.5 kA/cm2Nb standard process and its characteristics were investigated. It was shown that the microwave output could be successfully chopped by the SFQ switch. The amplitude and line width of the microwave output were measured as 15 muV and 2 Hz at 7 GHz.
We have been studying a superconducting quantum-computing system where superconducting qubits are controlled and read out by rapid single-flux- quantum (RSFQ) circuits. In this study, we designed and fabricated an RSFQ microwave chopper, which turns on and off an externally applied microwave to control qubit states with the time resolution of sub-nanosecond. The chopper is implemented in a microwave module and mounted in a dilution refrigerator. We tested the microwave chopper at 4.2K. The amplitude of the output microwave was approximately 100μV which is much larger than that of previously designed chopper. We also confirmed that the irradiation time can be controlled by RSFQ control circuits.
Superconducting qubits are generally controlled by irradiation with microwave pulses. We propose a 5-GHz-range microwave pulse generator based on pulse density modulation for controlling qubits using single-flux-quantum (SFQ) circuits. The proposed microwave pulse generator comprises a 100-GHz circular shift register and a band-pass filter (BPF). In this study, we investigated the relationship between the target envelope of the microwave amplitude and the SFQ pulse density based on the transfer function for the BPF and the frequency spectrum of an SFQ pulse. We implemented a 64-bit circular shift register and demonstrated its operation up to 68 GHz.
Abstract To achieve large-scale quantum processors, cryogenic quantum-bit (qubit) interface circuits that can control qubits inside a dilution refrigerator are indispensable. Superconducting single-flux quantum (SFQ) circuits are a promising building block for qubit interface circuits because SFQ circuits can operate with high clock frequencies and low power dissipation. In the present study, we developed an SFQ-based qubit interface circuit that we refer to as a pulse-pair microwave pulse generator (PP-MPG). The PP-MPG can generate microwave pulses for qubit control, with the microwave amplitude controlled based on the delay between paired SFQ pulses. By finely adjusting the delay with delay controlling circuits, the microwave amplitude can be controlled over a wide range. We fabricated a PP-MPG chip and tested it at 4.2 K, showing that the microwave amplitude can be controlled over a range of approximately 30 dB. Our results show that the PP-MPG has the potential for use in future large-scale quantum processors.
Abstract The use of high-frequency input signals from room-temperature microwave sources makes it difficult to scale up the number of quantum bits in universal quantum computers. To address this issue, superconducting single flux quantum (SFQ) integrated circuits are being explored as suitable candidates for qubit manipulation in universal quantum computers. This paper deals with a scalable SFQ qubit control circuit (SQCC) structure that requires only low-frequency input. The circuit mainly consists of a pulse generator and a counter, that output the SFQ pulse train with adjustable frequency and a controllable number of pulses, which is applicable to control single-qubit Clifford operations. The design of low-voltage rapid single flux quantum (LV-RSFQ) and energy-efficient rapid single flux quantum (ERSFQ) for the SQCC achieves low power consumption and provides a basis for scaling up SQCC to control more qubits. The proposed circuits are fabricated under the SIMIT-Nb03 process and successfully pass test verification. The achieved test results reveal that the adjustable output frequency ranges of the SQCC based on the LV-RSFQ and ERSFQ designs in order are [2.40, 8.11] GHz and [4.81, 5.14] GHz. In the operating frequency range, the circuit is able to generate the correct number of SFQ pulses under control. The controllable number range is from 1 to 128. When the circuits operate at 5 GHz, the total power consumptions of the above circuits in order are 23.88 μW and 6.2 μW. All input signals are low-frequency signals, which frees the control of large-scale qubits from limitations caused by high-frequency inputs produced by room-temperature microwave sources.
The use of high-frequency input signals from room-temperature microwave sources makes it difficult to scale up the number of quantum bits in universal quantum computers. To address this issue, superconducting single flux quantum (SFQ) integrated circuits are being explored as suitable candidates for qubit manipulation in universal quantum computers. Previously, we designed a low-power SFQ qubit control circuit (SQCC) to produce an equidistant SFQ pulse train without high-frequency input. It was reported that the fidelity of qubit control could be further improved if the pattern of SFQ pulse train could be adjustable. In this paper, we present optimized designs for different pattern requirements of qubit control, building upon the SQCC without high-frequency input. These designs feature segmented frequency modulation circuits, as well as circuits capable of outputting arbitrary patterns. The circuit capable of generating arbitrary patterns currently achieves a maximum adjustable number of 400, with a corresponding frequency output of 20 GHz. It has been successfully fabricated using the SIMIT Nb03 process and has passed functionality measurement tests. The optimized circuit opens up possibilities for improved qubit control and advancements in quantum computing applications.